• 융합정보논문지
• /
• 제7권5호
• /
• pp.75-82
• /
• 2017

최근에 무인비행체의 역할과 활용이 다양해짐에 따라 고 난이도의 임무 수행 요구가 증가하고 있으며 이를 해결하기 위하여 복수 소형무인비행체의 운용 및 관련 시스템 개발에 관한 연구가 활발히 수행되고 있다. 복수 소형 무인비행체 기반 응용 시스템은 관제요원이 여러 대의 소형무인비행체를 지속적으로 제어, 관리해야 하기 때문에 관제요원의 업무 복잡성이 증대되는 문제를 지닌다. 따라서 복수 소형무인비행체 기반 응용 시스템의 성공적인 구현을 위해서는 효율적인 관제를 수행할 수 있는 소프트웨어 플랫폼 개발이 필요하다. 본 논문에서는 복수 소형무인비 행체를 이용한 응용 시스템에 효과적인 지상관제 소프트웨어 플랫폼을 제안한다. 본 논문에서는 먼저 소프트웨어 플랫폼 개발에 필요한 요구사항들을 분석하고 이를 기반으로 소프트웨어를 설계, 구현한다. X-plane 비행시뮬레이터를 이용한 모의실험을 통하여 복수의 비행데이터들이 화면에 효과적으로 출력됨을 확인하고 다수의 소형무인비행체에서 전송되는 영상데이터들이 실시간으로 통합 시현됨을 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.612-618
• /
• 2009

Recently the roles of railways about the prevention of global warming caused by greenhouse gases and for low carbon green growth are larger than ever. And the railroad-related research institutions have been active in researching for energy conservation. Especially the urban railroad has been emerged as the best means of transportation compared to the general public transportation systems in punctuality, stability, ecology and etc. In operating the urban railroad system there are various ways for energy savings. In the larger category, One is the hardware aspect according to the structure of the vehicle and the development of control systems. The other is the software aspect which efficient train operation can be made through control of driving patterns and driving diagram. In this paper, there is sense to analyze the result in verifying expectation relation with variable and the use of electric power on this after selecting main variables that can influence to the energy of the train operation in the software aspect. First, after collecting the basic data related to operation(train speed, operating hours, power consumption, the position of stopping station, electrical power system etc.) and according to this, investigating the consumption of the energy of the operation, in the side of energy consumption deducing and analyzing problem, this will be found solutions.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.29-36
• /
• 2017

Electronic control technologies that have long been developed for passenger cars spread to construction equipment and agricultural vehicles because of its outstanding performance achieved by embedded software. Especially, system program of transmission control unit (TCU) plays a crucial role for the superb shift quality, driving performance and fuel efficiency, etc. Since the control algorithm is embedded in software that is rarely analyzed, development of such a TCU cannot be conducted by conventional reverse engineering. Transmission simulator is a kind of electronic device that simulates the electric signals including driver operation command and output of various sensors installed in transmission. Standalone TCU can be run in normal operation mode with the signals provided by transmission simulator. In this research, transmission simulator for the tracked vehicle TCU is developed for the analysis of shift control algorithm from the experiments with standalone TCU. It was confirmed that shift experimental data for the simulator setup conditions can be used for the analysis of control algorithms on proportional solenoid valves and shift map.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.542-547
• /
• 2012

현재까지 대부분의 지상통제 소프트웨어는 단일 무인 항공기에 대한 자세, 위치, 상태의 수신 및 가시화와 항공기의 운용을 위한 조종 명령 및 임무 전송의 기능만 갖추고 있었다. 하지만 단일 무인기의 운용에서 다중 무인기의 운용으로 사용자의 요구가 확장됨에 따라 지상통제 소프트웨어도 다중 무인기의 운용을 위한 기능의 확장이 요구되고 있다. 본 연구에서는 다중 무인항공기의 운용을 위한 요구사항을 제시하고 이를 만족시키기 위한 지상통제 소프트웨어의 구조를 제안하였다. 우선, 제시된 상위 요구 성능을 분석하여 그에 따른 전체 구조를 정의하고, 이를 다시 세부 요구사항으로 설정하여 세부구조를 설계하였다. 마지막으로 PILS 환경에서 구성된 지상통제 소프트웨어의 기능을 검증하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.274-284
• /
• 2019

The control architectures of Chuan Suo (CS) deep submergence rescue vehicle are introduced. The hardware and software architectures are also discussed. The hardware part adopts a distributed control system composed of surface and underwater nodes. A computer is used as a surface control machine. Underwater equipment is based on a multi-board-embedded industrial computer with PC104 BUS, which contains IO, A/D, D/A, eight-channel serial, and power boards. The hardware and software parts complete data transmission through optical fibers. The software part involves an IPC of embedded Vxworks real-time operating system, upon which the operation of I/O, A/D, and D/A boards and serial ports is based on; this setup improves the real-time manipulation. The information flow is controlled by the software part, and the thrust distribution is introduced. A submergence vehicle heeling control method based on ballast water tank regulation is introduced to meet the special heeling requirements of the submergence rescue vehicle during docking. Finally, the feasibility and reliability of the entire system are verified by a pool test.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.10-15
• /
• 2014

This study presents technical description of the operating program development that operates the test bench for functional test of EECU. The test bench is capable of testing, simulation and adjustment of the EECU software using the operating program. The test bench is for the Development Project of the EECU platform for FADEC system. The operating program is consists of 3 modules which are the test bench operating module, cockpit simulator module and SILS module. The operating module mainly carries out the EECU test with manual operation and operating scenarios. Also that record and process the test data. The cockpit simulator module is capable of implementation of virtual cockpit control input and engine status display. The SILS module can simulate engine and EECU operation in software environment.

• 제어로봇시스템학회논문지
• /
• 제5권5호
• /
• pp.622-629
• /
• 1999

This paper discusses a real time multi-tasking system model and a development environment for an elevator control system. Recently, as the elevator systems become large-scaled and operate with high speed, there are lots of software tasks to be processed with time constraints. Thus, the control systems are designed with distributed control structure and characteristics of typical real time systems. For stuructural design of such real time system, we introduce a multi-tasking model based on a real time operating system model and an software development environment based on virtual protopyping which simulates real system operation in the cross development of a new elevator system with distributed control structure and its system reliability can be verified through numerous field tests.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.319-326
• /
• 2001

Railway signaling safety system organizes equipments and facilities of railway, increases transport efficiency and assures safe operation of railway. In the early days of signaling system railway managers made sure of safety by using relay logic technology based on fail-safe concept. But the development result of computer and science having been introduced to railway industry, railway signaling equipments begin to be operated through micro electronic control system. Accordingly high speed and high density operation of train became possible. Software reliability and safety technology that controls important systems of railway was highlighted. In the middle of 1990s the standard or guideline of railway reliability and safety were studied and established, and are being reviewing in Europe, Japan etc. Our reliability and safety technology have depended largely on foreign countries. In this study we performed a basic study about the reliability of software that controls the railway signaling system.

• 천문학회보
• /
• 제44권2호
• /
• pp.46.2-46.2
• /
• 2019

The software group in Giant Magellan Telescope Organization (GMTO) is developing the GMT Software Development Kit (SDK) for the device control and the telescope operations. The SDK is dived into the modeling and the operation defining. In the modeling process, Domain Specific Language (DSL) can validate the availability of a model and generate a skeleton code automatically. After the modeling, the developer can simply define the device operation. All devices are connected via EtherCAT, and the SDK simplifies the network connection. This presentation will give an overview of the modeling process and development examples using the GMT SDK.