• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.41-48
• /
• 2017

In this paper, we proposed a method for digital logic circuit control, through arduino device programming with digital outputs, to design a curriculum for basic digital logic circuit practices. Curricula for arduino device programming and digital logic circuit are essentially practiced in engineering departments of colleges or high schools in South Korea. However, actual practice course lacks the experimental examples of digital logic circuit combined with arduino device programming. Furthermore, actual practice course lacks the curriculum in that students design and test their own digital logic circuits with the less cost than the oscilloscope. Therefore, to solve these problems in this paper, we proposed a curriculum for basic digital logic circuit practices during one semester. In this curriculum, students control and experiment their own digital logic circuits through arduino device programming with digital outputs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.171-171
• /
• 2010

An innovative design of a floating-buoy wave energy converter (WEC) using hydrostatic transmission (HST), named HSTWEC, is presented in this paper. The system is designed to convert ocean wave fluctuation into electricity by using the HST circuit and an electric generator. Based on the floating-buoy concept, the wave forces the sub-buoy to move up and down. Consequently, the electric power can be obtained from the generator in both the moving directions of the sub-buoy through the HST circuit as shown in Fig. 1. In order to investigate the HSTWEC operations, a mathematical model of the system is indispensible. In addition, the method to control the HSTWEC, including: pump displacement control, tension adjustment control and ballast weight control, is also discussed in this paper. Finally, the design concept as well as simulation results indicated that this HSTWEC design is an effective solution and possible to fabricate for wave energy generation.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.221-224
• /
• 2012

We propose a Readout Integrated Circuit (ROIC), which applies a fixed current bias sensing method to the input stage in order to simplify the circuit structure and the infrared sensor characteristic control. For the sample-and-hold stage to display and control a signal detected by the infrared sensor using a two-dimensional (2D) focal plane array, a differential delta sampling (DDS) circuit is proposed, which effectively removes the FPN. In addition, the output characteristic is improved to have wider bandwidth and higher gain by applying a two-stage variable gain amplifier (VGA). The output characteristic of the proposed device was 23.91 mV/$^{\circ}C$, and the linearity error rate was less than 0.22%. After checking the performance of the ROIC using HSPICE simulation, the chip was manufactured and measured using the SMIC 0.35 um standard CMOS process to confirm that the simulation results from the actual design are in good agreement with the measurement results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.429-436
• /
• 2021

The design of a gate driver power supply for a three-phase inverter using a silicon carbide (SiC) MOSFET. The requirements for the power supply circuit of the gate driver for the SiC MOSFET are investigated, and a flyback converter using multiple transformers is used to make the four isolated power supplies. The proposed method has the advantage of easily constructing the power supply circuit in a limited space as compared with a multi-output flyback converter using a single core. The power supply circuit for the three-phase SiC MOSFET inverter for driving an AC motor is designed and implemented. The operation and validity of the implemented circuit are verified through simulations and experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.60-69
• /
• 1993

The speed control associated with dc servo motors for direct-drive applications of mobile robot is considered in this study. Robot is moved by power wheeled steering of two dc servo motors mounted to it. In order to cooperate with micro-computer and to achieve the high-performance operation of dc servo motor, speed control system is composed of a digital Phase Locked Loop and H-type drive circuit. And the motor is driven by Pulse Width Modulations. In controlling PWM, it is modified to compose of H-type drive circuit with feedback diodes and switching transistor and design of control sequence so that it may show linear characteristics. As a result, speed characteristics of motor showed linear features. In order to get data on design of PLL control system, the parameters of 80[W[ motor & robot device is measured by simple software control. The PLL speed control system is schemed and designed by leaner drive circuit and measured parameters. A complete speed control system applied to 80[W] dc servo motor showed good linearity, stability and high response. Also, it is verified that the PLL speed control system has good compatibility as a mobile robot driver.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2487-2494
• /
• 2012

In this paper, a thermal energy harvesting circuit with MPPT control is designed. MPPT(Maximum Power Point Tracking) control function is implemented using the linear relationship between the open-circuit voltage of a thermoelectric generator(TEG) and its MPP voltage. The designed MPPT control circuit traces the maximum power point by periodically sampling the open circuit voltage of a TEG, makes the reference voltages using sampled voltage and delivers the maximum available power to load. Simulation results show that the maximum power efficiency of the designed circuit is 94%. The proposed thermal energy harvesting circuit is designed with $0.35{\mu}m$ CMOS process, and the chip area except PAD is $1168.7{\mu}m{\times}541.3{\mu}m$.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.490-495
• /
• 2006

In this research, the design procedure and the design method of a single-phase line-start permanent magnet motor (LSPM) are proposed. In the design procedure, the permanent magnet is designed first and the windings and capacitors are designed later. As well, the points of design of each design parameter are explained. In the design of the single-phase LSPM, the equivalent circuit method is combined with the finite element method (FEM) because it has a shorter analysis time than FEM. The 400 watts single-phase LSPM is designed and manufactured. The characteristics of the manufactured single-phase LSPM are analyzed and experimented. From the analysis result and the experiment result, it is verified that the design procedure and the design method of the single-phase LSPM is valid.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.05a
• /
• pp.302-305
• /
• 2006

A problem that arises in most communication receivers concerns the wide variation in power level of the signals received at the antenna. These variations cause serious problems which can usually be solved in receiver design by using Automatic Gain Control (AGC). AGC is achieved by using an amplifier whose gain can be controlled by external current or voltage. However, the AGC circuit does not respond to rapid changes in the amplitude of input. If input changes instantaneously, then even if op-amps could follow the change, the envelope detector capacitor could not, since the capacitor's voltage could not change instantaneously. To alleviate this deficiency, we present Improved Automatic Gain Control Circuit (IAGCC) replacing AGC circuit to FLC.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.624-626
• /
• 1997

Canonical Chua's circuit is a simple electronic circuit which exhibits a variety of bifurcation phenomena and attractors. It consists of two capacitors, an inductor, two linear resistors, and a nonlinear resistor. When the circuit exhibits chaotic signals, the nonlinear resistor of canonical Chua's circuit may have three different voltage - current characteristics. In this paper, the design methodology for practical implementation of the nonlinear resistors which have all these characteristics is described. In addition, the effectiveness of result is shown by not only the MATLAB simulation but also the PSPICE simulation.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1499-1502
• /
• 1987

The control part of one-chip microcomputer has been designed with the 3um design rule for CMOS poly silicon gate and Its cells were layed out. The operation of the logic circuits were simulated with EDAS_P. The widths and lengths of circuit were determined by using PSPICE. The control part of microcomputer has designed by using hardwired methode. Results of logic simulation and circuit simulation are in good agreements with expected circuit characteristics.