• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.709-716
• /
• 2005

As a way to build more efficient and intelligent container cranes for todays hub ports, communication networks are used to interconnect numerous sensors, actuators, controllers, and operator switches and consoles that are spatially distributed over a crane. Various signals such as sensor values and operator's commands are digitized and broadcast on the network instead of using separate wiring cables. This not only makes the design and manufacturing of a crane more efficient, but also easier implementation of intelligent control algorithms. This paper presents the performance evaluation of CAN(Controller Area Network), TTP(Time Triggered Protocol) and Byteflight that can be used for cranes. Through discrete event simulation, several important quantitative performance factors such as the probability of a transmission failure, average system delay (data latency) and maximum system delay have been evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.794-799
• /
• 2012

The international standard, ISO-11783, was designed for the communication within an agriculture machinery. Even if it is based on the CAN (Control Area Network) protocol, its extended features which include point-to-point communication and large data transmission support show different network performance from the standard CAN. This paper proposes a dynamic priority allocation method to improve the real-time performance of ISO-11783. Computer simulation shows reduction of the deadline-missed cases and community latency via proposed algorithm.

• Journal of Korean Society of Transportation
• /
• v.5 no.2
• /
• pp.81-95
• /
• 1987

In line with the continued growth of car ownership, the traffic problems in central area of metropoles such as Seoul would become increasingly degraded. comparing with most western cities, the problems in Seoul are characterized by the improportionately high rates of intersection delay, station congestion, traffic accidents caused by weaving conflicts and pedestrian congestion. It is caused by the lack of flexibility I street network, which is prerequisite for upholding the efficacy of traffic management and control, resulted from the simplicity of network graph in terms of connectivity, street density and distribution by width. This pattern has been resulted from the prolonged policy pursuing the street-widening of the nagging bottleneck in such a short period since the 1950s, comparing that most western cities had undergone over several centuries an age of horse-and-vehicle transportation. In order to improve the expected traffic problems in central area over the coming periods of motorization, it is imperative to restructure the street network in Central Seoul so that the efficacy of traffic management and control may be operative. Based upon the long-range planning the street network should be restructured by stages so that cenral traffic may be controled by one-way operation and most through-traffic be detoured around fringe area.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.113-120
• /
• 2015

Network type distributed control system uses a communication line which is named the BUS to exchange a data among the sub-systems. Usually, on the bus, only one data must be exited at one time, so the control algorithm to prevent collision or to manage a priority of data is important. Including CAN Protocol, many kind of FieldBus which are used for distributed control system, prevent data collision by controlling transmission time. But, a system which have to make a control signal or get a data from a sensor at fixed time will be met a problem when it is composed by using a network type distributed control structure. In this paper, some of these cases will be discussed and solutions be proposed for preventing a data collision. Also, using Arago Disk System which have a structure for inner loop control, the validity of the proposed methods will be verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.7-14
• /
• 2006

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.80-82
• /
• 2004

Personal robot consist of various modules that have independent functions. Because personal robot has requirement that support various construction for user's tendency. Therefore, Middleware mechanism at support not only personal robot's main functional element but also embedded modules functional elements is required. Each module have various heterogeneous network interfaces and variable services and variables. Therefore, Middleware must support these various network interfaces. This paper, pointed in Controller Area Network(CAN) inreface that usually used in embedded system for control. For connect various heterogeneous network interfaces (Ethernet, RS232 etc..), it is necessary to modify bagic CAN frame format. And also make some kind of BUS topology for CAN network.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.53-63
• /
• 2016

This paper applies WiMedia UWB network into a wireless ship area network (WSAN) so as to support high-quality multimedia services on board and reliable instrument control information as well, since the need for mixed high-quality video traffic and shipboard control data traffic is essential for a high-cost valued digital ship. Thus, in this paper, prioritized contention access (PCA) and distributed reservation protocol (DRP) based on WiMedia UWB (ECMA-368) MAC protocols are combined and proposed to such mixed traffic environment, by varying the portions of superframe according to traffic type. It is shown that the proposed WiMedia UWB MAC protocol can provide reliable mixed video and shipboard control data traffic as well.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.195-197
• /
• 2006

In this paper, an interface unit is designed to efficiently monitor transmission data in Controller Area Network(CAN)-based control systems. The CAN uses a serial multi master communication protocol that efficiently supports distributed real-time control with a very high level of data integrity, and communication speeds of up to 1Mbps. The interface unit is composed of a DSP controller which collects data on the CAN bus and transfers data to a personal computer via serial communication to save and display of interesting signals. The experimental system consists of three DSP controllers which represent electronic control units of a vehicle, an interface unit for analysing the data on the bus, and a graphic monitoring program coded on the Windows platform. The validity and the effectiveness of the proposed simple type of CAN interface unit are shown through the experimental results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.35-41
• /
• 2015

Multilateration(MLAT) is commonly used in civil and military surveillance applications to accurately locate an aircraft, vehicle or stationary emitter. MLAT calculates the TDOA of signals by transmitted aircraft and determines the aircraft's location. With more than four receivers it is possible to estimate the 3D position of the aircraft by calculating the intersection of the resulting hyperbolas and the system integrity. In this study, our objectives are to apply MLAT technique to Jeju terminal control area and to propose a MLAT receiver network to properly estimate the positions of aircraft approaching this area. Based on computer simulations, we determine locations of ground receivers in Jeju terminal control area, calculate estimated position errors of the aircraft with respect to the selected receiver networks, and find the best receiver network with the least position error.