• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.17-26
• /
• 2010

This is concerned with the technology to monitor the vehicle operation, failure and disorder by using WiBro portable device. More precisely, the technology makes it possible that the information collection device is connected to both ECU(Electronic Control Unit) which is the device for controlling engine, transmission, brake, air-bag, etc that are connected to in-vehicle network and OBD-II connector that is for data collection from various sensors. In addition, with a WiBro portable device (cell phone, PDA, PMP, UMPC, etc). equipped with a vehicle diagnostic programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and alarm is alerted when the vehicle is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiBro network to the server managed by the company specialized in managing the vehicles, thus the technology could help the drivers who have less knowledge about their auto-vehicles have safe and economic driving. There is always a possibility of malfunction due to various types of noise that are caused by wring-harness when the device is wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from vehicle and a personal WiBro device. Also, we performed research on data acquisition and interlock for the system defined by the definition for information and data sharing platform.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.299-306
• /
• 2002

The load frequency control(LFC) of power system is one of important subjects in view of system operation and control. That is, even though the rapid load disturbances are applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow ones of each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation are given, the unstable phenomena of power systems can be often brought out because of the large frequency deviation and the unsuppressible power line one. So, an optimal modulation controller for UC of multi-area power system is designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance criterion. The optimal modulation controller is based on optimal control and can obtain the exact dynamic response of the UC of multi-area power system in the time domain. The performances of the resultant optimal modulation control, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the UC of multi-area power system in the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbance of stepwise load changes, the superiorities of the proposed optimal modulation controller in robustness and stability were proved.

• The KSFM Journal of Fluid Machinery
• /
• v.20 no.1
• /
• pp.53-58
• /
• 2017

This paper describes liquidity evaluation on the horizontal branch pipe connected to a food waste disposer and performance of five disposers marketed. Experimental apparatus for analyzing the five disposers has been introduced to measure vibration, sound level and power consumption of the disposers. Simulator for analyzing the required water velocity to avoid waste jam inside the pipe connected to a food waste disposer has been designed and constructed. The simulator can control some experimental parameters: pipe slope, disposer supply water quantity, food waste materials and operation time of a disposer. Throughout the experimental measurements of the disposers marketed, it is found that the time need to crash food waste is about 20 seconds on the average. At the same flow condition, increase rate of internal water velocity is accelerated as the pipe slope increases. The water velocity inside the pipe having 50 A and slope of 1/50 is 0.26 m/s when the water flowrate to supply the disposer is 16 l pm. Considering the specific gravity and adhesion property of food waste, water velocity of the horizontal branch pipe connected to a food waste disposer need to excess 0.26 m/s at least to avoid the waste blockage inside the pipe.

• Journal of fish pathology
• /
• v.33 no.1
• /
• pp.97-101
• /
• 2020

Although aquaculture production rates grown over the years, aquatic animal diseases occur every year which causes substantial economic losses. When an aquatic animal is infected with an aquatic animal pathogen it is either incinerated or buried according to the aquatic life disease control act. Although these methods prevent the spread of disease, it is not environment friendly. Here, we developed an aquatic animal rendering equipment for disposal of fish waste which is environment-friendly and efficient. Also, fertilizer components of fish waste were evaluated value for recycling. The mobile rendering equipment was designed for field operation and/or high temperature and pressure system, oil and water separator, and shredding drying apparatus. During the experiment (July-2016 to November-2016), a total of 53,824 kg fish waste was collected, and 29,216 kg compost of rendering by-product was made. Also, compost made from viral (Viral hemorrhagic septicemia virus) infected fish did not reflect any detectable pathogen. The concentration of nitrogen, phosphorus, and organic matter in the fish waste compost were 2.17%, 26.98%, and 92.44%, respectively. The results suggest that fish waste used in this study was decomposed efficiently as per the official standard for fertilizer product. This equipment can be useful for efficient inactivation of the aquatic animal pathogenic agents and recycling of the fish waste in an environment-friendly manner.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.255-262
• /
• 2011

This paper proposes a grid-tied power conditioning system for fuel cell, which consists of three-phase current-fed DC-DC converter and three-phase PWM inverter. The three-phase current-fed DC-DC converter boosts fuel cell voltage of 26-48 V up to 400 V with zero-voltage switching (ZVS) scheme, while the three-phase PWM(Pulse Width Modulation) inverter controls the active and reactive power supplied to the grid. The operation of the proposed power conditioning system with fuel cell model is verified through simulations with PSCAD/EMTDC software. The feasibility of hardware implementation is verified through experimental works with a laboratory prototype with 1.2 kW proton exchange membrane (PEM) fuel cell stack. The proposed power conditioning system can be commercialized to interconnect the fuel cell with the power grid.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.26-33
• /
• 2003

The term 'High Speed Machining' has been used for many years to describe end milling with small diameter tools at high rotational speeds, typically 10,000-100,000rpm. The process was applied in the aerospace industry for the machining of light alloys, notably aluminum. In recent year, however, the mold and die industry has begun to use the technology for the production of components, including those manufactured from hardened tool steels. With increasing cutting speed used in modern machining operation, the thermal aspects of cutting become more and mole Important. It not only directly influences in rate of tool weal, but also affects machining precision recognized as thermal expansion and the roughness of the surface finish. Hence, one needs to accurately evaluate the rate of cutting heat generation and temperature distributions on the machining surface. To overcome the heat generation, we used to cutting fluid. Cutting fluid plays a roles in metal cutting process. Mechanically coupled effectiveness of cutting fluids affect to friction coefficient at tool-workpiece interface and cutting temperature and chip control, surface finish, tool wear and form accuracy. Through this study, we examined the behavior of heat generation in high-speed machining and the cooling performance of various cooling methods.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup2
• /
• pp.1-5
• /
• 2016

To reduce tobacco use and related harm in Korea, telephone based cessation services (Quitlines) began full operation to provide regular behavioral counseling for smoking cessation in 2006. After registration in the cessation program, at least 21 calls per year are given to each client to help quit and encourage maintenance. Tailored programs for males, females, and adolescent smokers have been offered taking into account smokers' characteristics and smoking behavior. Mailing self-help quit packs and e-mail and SMS services are allowable as additional services.A total of 23,201 smokers were registered on the Quitline program from 2006 to 2014. In 2014, an average of 13,343 calls per month have been received by 28 coaches, the 1 year abstinence rate of clients is 26%, and clients' satisfaction rate is 81.6%. After introduction of the call system in 2007, client convenience and effective operations have been achieved with high technology support of a computer-based telephone system. Systematic education and evaluation programs for quit coaches have contributed to quality assurance of the services. Currently, research into development of new programs and evaluation of Quitline performance is being undertaken. A Comprehensive Multi-channel Cessation Center (CMCC) has been suggested and is now planned as a next step in the national program for smoking cessation.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.478-483
• /
• 2012

In order to evaluate the microbial safety of the foodstuffs and manus in regards to foodservice operations, the total of 1,051 samples of drinking waters, vegetables, and cooked foods were collected. Total viable count (TVC), coliform group, and pathogens were analyzed. Twenty five percent samples of 441 drinking waters showed high contamination of above 2 log CFU/g TVC. Twenty percent of the waters were contaminated by above one log CFU/g coliform. Forty percent of non-heated food, Moochim, were contaminated by above 5 log CFU/g TVC and 26% of Moochim were contaminated by above 2 log CFU/g coliform. Bacillus cereus and Eschericia coli were detected on boiled rice and kimchi, and B. cereus was detected with a high ratio. Therefore, the foodstuffs and manus regarding foodservice operations appear to be generally safe. However, efficient microbial control for drinking water and Moochim-style food is necessary and in particular, careful management to reduce microbial contamination should be applied to drinking water.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.25-30
• /
• 2016

This paper presents on the development of a compact anti-lost device requested recently. The proposed device consists of the master and slave modules based on Bluetooth4.1 technology. To implement a low-power characteristic, an algorithm has been also developed. The transmitting and receiving circuits are designed by using BoT CLE110 module supporting Bluetooth 4.1. The ATmega 328P-AU was used for the control and LP3874EMP was used as a linear regulator. Power consumption of the fabricated product in operating mode is only 10mAh and 35mAh for MCU operating state. Alarm operation distance is $10m{\pm}30%$, the effective radiated power is less than 10mW, the frequency band is designed to operate in the Bluetooth band with 26MHz bandwidth. And algorithms have been developed to extend the battery life. The size of the product was obtained as $45{\times}45{\times}15mm$ for master and $35{\times}35{\times}10mm$ fr slave. After the optimization process, it is expected to be commercialized as a wristwatch for anti-lost device.