• 대한전자공학회논문지TC
• /
• 제47권10호
• /
• pp.17-26
• /
• 2010

본 논문은 와이브로 휴대기기를 이용한 차량의 운행, 고장, 이상 정보의 모니터링 기술에 관한 것으로서, 차량 내부 망(In-Vehicle Network)에 연결된 엔진, 트랜스미션, 브레이크, 에어백 등의 제어장치인 ECU(Electronics Control Unit) 및 각종 센서들로부터의 데이터 획득을 위해 차량내의 OBD-II(On-Board Diagnostics) 커넥터에 차량 정보 수집 장치를 연결한다. 또한, 와이브로 휴대기기(휴대폰, PDA, PMP, UMPC 등)에 차량 진단 프로그램을 탑재하여 차량 주행 중에 발생되는 운행, 고장, 이상 정보를 실시간으로 수집 및 분석하여 이상 징후 발생 시 알림 메시지를 발생하여 차량의 이상에 대해 신속히 대처할 수 있다. 이와 동시에, 휴대기기를 통해 수집된 차량 정보 데이터는 와이브로망을 통해 차량 관리 전문회사의 서버로 전송되어 체계적인 차량 관리에 활용될 수 있어 차량에 대한 지식이나 상식이 부족한 모든 운전자에게 차량 관리에 대한 편리함을 제공하여 안전운전 및 경제운전 등의 서비스를 제공할 수 있다. 차량 진단 장치와 유선으로 연결하는 경우 와이어링 하네스에 의한 각종 노이즈가 유입되어 커넥터 내구성이 나빠져 우려가 상존한다. 이러한 어려움을 해결하고자 본 연구에서는 차량에 탑재되는 차량 정보 수집 장치와 운전자가 사용 중인 개인의 와이브로 휴대기기로 차량 진단 및 모니터링이 가능한 시스템을 구성 하였고, 차량 정보 및 상태 자료 공유 연통 플랫폼의 정의에 따른 시스템에 있어서 자료의 획득 및 연동기술을 연구하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.299-306
• /
• 2002

The load frequency control(LFC) of power system is one of important subjects in view of system operation and control. That is, even though the rapid load disturbances are applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow ones of each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation are given, the unstable phenomena of power systems can be often brought out because of the large frequency deviation and the unsuppressible power line one. So, an optimal modulation controller for UC of multi-area power system is designed by a recursive algorithm that determines the state weighting matrix Q of a linear quadratic performance criterion. The optimal modulation controller is based on optimal control and can obtain the exact dynamic response of the UC of multi-area power system in the time domain. The performances of the resultant optimal modulation control, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the UC of multi-area power system in the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbance of stepwise load changes, the superiorities of the proposed optimal modulation controller in robustness and stability were proved.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.53-58
• /
• 2017

This paper describes liquidity evaluation on the horizontal branch pipe connected to a food waste disposer and performance of five disposers marketed. Experimental apparatus for analyzing the five disposers has been introduced to measure vibration, sound level and power consumption of the disposers. Simulator for analyzing the required water velocity to avoid waste jam inside the pipe connected to a food waste disposer has been designed and constructed. The simulator can control some experimental parameters: pipe slope, disposer supply water quantity, food waste materials and operation time of a disposer. Throughout the experimental measurements of the disposers marketed, it is found that the time need to crash food waste is about 20 seconds on the average. At the same flow condition, increase rate of internal water velocity is accelerated as the pipe slope increases. The water velocity inside the pipe having 50 A and slope of 1/50 is 0.26 m/s when the water flowrate to supply the disposer is 16 l pm. Considering the specific gravity and adhesion property of food waste, water velocity of the horizontal branch pipe connected to a food waste disposer need to excess 0.26 m/s at least to avoid the waste blockage inside the pipe.

• 한국어병학회지
• /
• 제33권1호
• /
• pp.97-101
• /
• 2020

Although aquaculture production rates grown over the years, aquatic animal diseases occur every year which causes substantial economic losses. When an aquatic animal is infected with an aquatic animal pathogen it is either incinerated or buried according to the aquatic life disease control act. Although these methods prevent the spread of disease, it is not environment friendly. Here, we developed an aquatic animal rendering equipment for disposal of fish waste which is environment-friendly and efficient. Also, fertilizer components of fish waste were evaluated value for recycling. The mobile rendering equipment was designed for field operation and/or high temperature and pressure system, oil and water separator, and shredding drying apparatus. During the experiment (July-2016 to November-2016), a total of 53,824 kg fish waste was collected, and 29,216 kg compost of rendering by-product was made. Also, compost made from viral (Viral hemorrhagic septicemia virus) infected fish did not reflect any detectable pathogen. The concentration of nitrogen, phosphorus, and organic matter in the fish waste compost were 2.17%, 26.98%, and 92.44%, respectively. The results suggest that fish waste used in this study was decomposed efficiently as per the official standard for fertilizer product. This equipment can be useful for efficient inactivation of the aquatic animal pathogenic agents and recycling of the fish waste in an environment-friendly manner.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.255-262
• /
• 2011

This paper proposes a grid-tied power conditioning system for fuel cell, which consists of three-phase current-fed DC-DC converter and three-phase PWM inverter. The three-phase current-fed DC-DC converter boosts fuel cell voltage of 26-48 V up to 400 V with zero-voltage switching (ZVS) scheme, while the three-phase PWM(Pulse Width Modulation) inverter controls the active and reactive power supplied to the grid. The operation of the proposed power conditioning system with fuel cell model is verified through simulations with PSCAD/EMTDC software. The feasibility of hardware implementation is verified through experimental works with a laboratory prototype with 1.2 kW proton exchange membrane (PEM) fuel cell stack. The proposed power conditioning system can be commercialized to interconnect the fuel cell with the power grid.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.26-33
• /
• 2003

The term 'High Speed Machining' has been used for many years to describe end milling with small diameter tools at high rotational speeds, typically 10,000-100,000rpm. The process was applied in the aerospace industry for the machining of light alloys, notably aluminum. In recent year, however, the mold and die industry has begun to use the technology for the production of components, including those manufactured from hardened tool steels. With increasing cutting speed used in modern machining operation, the thermal aspects of cutting become more and mole Important. It not only directly influences in rate of tool weal, but also affects machining precision recognized as thermal expansion and the roughness of the surface finish. Hence, one needs to accurately evaluate the rate of cutting heat generation and temperature distributions on the machining surface. To overcome the heat generation, we used to cutting fluid. Cutting fluid plays a roles in metal cutting process. Mechanically coupled effectiveness of cutting fluids affect to friction coefficient at tool-workpiece interface and cutting temperature and chip control, surface finish, tool wear and form accuracy. Through this study, we examined the behavior of heat generation in high-speed machining and the cooling performance of various cooling methods.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권sup2호
• /
• pp.1-5
• /
• 2016

To reduce tobacco use and related harm in Korea, telephone based cessation services (Quitlines) began full operation to provide regular behavioral counseling for smoking cessation in 2006. After registration in the cessation program, at least 21 calls per year are given to each client to help quit and encourage maintenance. Tailored programs for males, females, and adolescent smokers have been offered taking into account smokers' characteristics and smoking behavior. Mailing self-help quit packs and e-mail and SMS services are allowable as additional services.A total of 23,201 smokers were registered on the Quitline program from 2006 to 2014. In 2014, an average of 13,343 calls per month have been received by 28 coaches, the 1 year abstinence rate of clients is 26%, and clients' satisfaction rate is 81.6%. After introduction of the call system in 2007, client convenience and effective operations have been achieved with high technology support of a computer-based telephone system. Systematic education and evaluation programs for quit coaches have contributed to quality assurance of the services. Currently, research into development of new programs and evaluation of Quitline performance is being undertaken. A Comprehensive Multi-channel Cessation Center (CMCC) has been suggested and is now planned as a next step in the national program for smoking cessation.

• 한국식품과학회지
• /
• 제44권4호
• /
• pp.478-483
• /
• 2012

단체급식소가 식품안전에서 중요한 관리장소이므로 이들 메뉴 미생물 오염을 분석하여 안전성을 평가하고자 하였다. 441점의 접객용 음용수, 고오염 메뉴인 610점의 채소류와 조리식품 등 총 1,051점을 수집하여 총세균, 대장균군, 식중독 세균들의 오염을 분석하였다. 음용수의 25%는 2 log CFU/mL보다 높은 세균이 오염되어 있었고 대장균군은 약 20%시료에서 1 log CFU/g을 초과하여 검출되었다. 식재료인 채소류의 경우 부추, 양파, 마늘 등에서 총균수 6 log CFU/g 이상인 비율이 약 40, 30, 80%로 나타났다. 당근, 상추, 근대 등에서 대장균군3 log CFU/g 이상이 60, 30, 30%로 나타났다. 대부분의 조리식품은 총세균과 대장균군이 매우 낮게 나타났다. 그러나 비가열 식품인 무침류는 총세균 5 log CFU/g 이상의 시료가 40%, 대장균군수가 2 log CFU/g 이상의 시료가 26%로 미생물 오염도의 관리에 특별한 주의가 필요한 메뉴 유형인 것으로 보인다. 대부분의 식중독 세균은 검출되지 않았지만 B. cereus와 E. coli가 밥과 김치에서 분리되었고 B. cereus가 높은 비율로 밥에서 검출되었다. 그러므로 단체급식소 메뉴는 미생물 안전성이 높은 것으로 판단되나 일부 음용수, 근채류, 무침류 등은 효과적인 미생물제어가 필요한 것으로 보인다. 특히 음용수의 경우는 세균 오염이 되지 않도록 관리가 철저히 이루어질 필요가 있는 것으로 보인다.

• 중소기업융합학회논문지
• /
• 제6권4호
• /
• pp.25-30
• /
• 2016

본 논문에서는 최근 증가하고 있는 소지품의 분실 방지를 위한 소형 장치의 개발 결과를 제시하고 있다. 제안된 분실 방지 장치 개발을 위해 블루투스4.1 기반의 Slave와 Master로 구성되는 송수신회로로 구성된다. 그리고 저 전력 특성을 구현하기 위해 알고리즘 개발이 병행 되었다. 송수신회로는 블루투스4.1 기능을 지원하는 BoT CLE110 모듈을 사용하였으며, 장치의 제어를 위해 ATmega 328P-AU가 사용되었고 선형 레귤레이터로 LP3874EMP가 사용되었다. 설계된 제품의 소모 전력은 동작 상태에서 35mAh, MCU만 동작 할 경우 10mAh이다. 알람동작거리는 $10m{\pm}30%$, 실효복사전력은 10mW이하, 주파수대역은 블루투스 대역에서 26MHz 이하를 유지하도록 설계되었다. 그리고 Slave와 Master부의 배터리 수명을 연장하기 위한 알고리즘이 개발되었으며, 제품의 크기는 Master($45{\times}45{\times}15mm$), Slave($35{\times}35{\times}10mm$)로 사용자의 편의성을 확보하였다. 본 제품을 최적화 과정을 거쳐 손목시계형 분실 방지 장치로 상용화가 가능할 것으로 기대 된다.