• Polymer Science and Technology
• /
• v.26 no.3
• /
• pp.221-225
• /
• 2015

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.439-440
• /
• 2002

Nano-Crystalline $CeO_2$ particles were dispersed in deionized water with controlled slurry chemicals for CMP test. According to the CMP test, the removal rate of $SiO_2$ layer was mainly controlled by the size and crystallinity of $CeO_2$ particles which can be controlled by the heat-treatment condition during $CeO_2$ synthesis. In contrast, the removal rate of $Si_3N_4$ layer was significantly influenced by the passivation reagent which protects the $Si_3N_4$ surface layer from excessive dissolution during CMP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.415-418
• /
• 2004

The performance of dichroic sponge polymer dispersed liquid crystals (D-SPDLC) can be improved further by modifying the TFT diffusing reflector using a $TiO_2$ layer. A metal-like glare was suppressed, and a wider viewing angle than previously reported was achieved. The display showed above newspaper-standard reflectivity and contrast ratio.

• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.113-116
• /
• 2015

Silver materials may be toxic in humans because they can enter the body and accumulate, typically in the lungs. We hypothesized that the cytotoxicity of naive silver materials is affected by their size and shape. Our in vitro assays revealed that the overall toxicity was in the following order: submicro-particles>wires>micro-particles. These results contrast with previous studies, which showed that silver wires are the most toxic among the three tested materials, possibly due to differences in cell lines. Evaluations of in vivo pulmonary toxicity revealed eryptosis in the cavity lining of the lung sections. The observed eryptosis was consistent with the in vitro results. Our results indicate that silver materialinduced cytotoxicity must be measured and compared using various methods.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.7.2-7.2
• /
• 2011

Photoelectrochemical solar cells such as dye-sensitized cells (DSSCs), which exhibit high performance and are cost-effective, provide an alternative to conventional p-n junction photovoltaic devices. However, the efficiency of such cells plateaus at 11~12%, in contrast to their theoretical value of 33%. The majority of research has focused on improving energy conversion efficiency of DSSC by controlling nanostructure and exploiting new materials in photoelectrode consisting of semiconducting oxide nanoparticles and a transparent conducting oxide electrode (TCO). In this presentation, we introduce monodisperesed TiO2 nanoparticles prepared by forced hydrolysis method and their superiority as photoelectrode materials was characterized with aids of optical and electrochemical analysis. Inverse opal-based scattering layers containing highly crystalline anatase nanoparticles are also introduced and their feasibility for use as bi-functional light scattering layer is discussed in terms of optical reflectance and charge generation properties as a function of optical wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.699-702
• /
• 2006

We have developed twist nematic liquid crystal displays (TN-LCDs), of which the viewing angle can be controlled. The TN-LCDs have the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively. In this way, the viewing angle range in terms of contrast ratio 5:1 can be switched from $120^{\circ}$ to $60^{\circ}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.893-895
• /
• 2009

In this paper, we described the unique and novel method to prepare two kinds of electro-active particles, black and white particles with different polarity. The surface of the particles was characterized to be uniform and clean by adopting spray dryer as a tool for genesis of particles; neither surfactants nor high dielectric medium like water was employed during particle preparation step. The other purpose of this study is to investigate the factors that contribute high driving voltage of particlebased display like QR-LPD. We extracted parameters interaction between particle and electrode, and between oppositely charged particles. Here we reported an excellent behavior of particle-based display that showed low operating voltage, high contrast ratio as high as 8:1 without scarification of quick response time. By optimizing the particle size, charge per mass, selection of external additive sets, a lower driving voltage as low as 40V for the particles with $10{\mu}m$ volume average diameter was obtained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.28-28
• /
• 2010

Photoelectrochemical solar cells such as dye-sensitized cells (DSSCs), which exhibit high performance and are cost-effective, provide an alternative to conventional p-n junction photovoltaic devices. However, the efficiency of such cells plateaus at 11-12%, in contrast to their theoretical value of 33%. Improvements in efficiency can only occur through a fundamental understanding of the underlying physics, materials, and device designs of DSSCs. A photoelectrode consisting of semiconducting oxide nanoparticles and a transparent conducting oxide electrode (TCO) is a key component of DSSC and design of photoelectrode materials is one of promising strategies to improving energy conversion efficiency. We introduce monodisperesed $TiO_2$ nanoparticles prepared by forced hydrolysis method and their superiority as photoelectrode materials was characterized with aids of optical and electrochemical analysis. Multi-layered TCO materials are also introduced and their feasibility for use as photoelectrodes is discussed in terms of optical absorption and charge collecting properties.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.478-483
• /
• 2003

The crystallographic characteristics of the $(Bi, La)_4$$Ti_3$$O_{12}$ thin film, which is considered as an applicable dielectrics in the ferroelectric RAM device due to a low crystallization temperature and a good fatigue property, were investigated at the atomic scale by high resolution transmission electron microscopy and the high resolution Z-contrast technique. The analysis showed that a (00c) preferred orientation and a crystallization of the film were enhanced with the diffraction intensity increase of the (006) and (008) plane as the annealing temperature increased. It indicated a change of the atomic arrangement in the (00c) plane. Stacking faults on the (00c) plane were also observed. Through the comparison of the high-resolution Z-contrast image and the $Bi_4$$Ti_3$$O_{12}$ atomic model, it was evaluated that the intensity of the Bi atom was different according to the atomic plane, and it was attributed to a substitution of La atom for Bi at the specific atom position.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.10-20
• /
• 2010

Purpose : Recently, the Recon Challenge at the 2009 ISMRM workshop on Data Sampling and Image Reconstruction at Sedona, Arizona was held to evaluate feasibility of highly accelerated acquisition of time resolved contrast enhanced MR angiography. This paper provides the step-by-step description of the winning results of k-t FOCUSS in this competition. Materials and Methods : In previous works, we proved that k-t FOCUSS algorithm successfully solves the compressed sensing problem even for less sparse cardiac cine applications. Therefore, using k-t FOCUSS, very accurate time resolved contrast enhanced MR angiography can be reconstructed. Accelerated radial trajectory data were synthetized from X-ray cerebral angiography images and provided by the organizing committee, and radiologists double blindly evaluated each reconstruction result with respect to the ground-truth data. Results : The reconstructed results at various acceleration factors demonstrate that each components of compressed sensing, such as sparsifying transform and incoherent sampling patterns, etc can have profound effects on the final reconstruction results. Conclusion : From reconstructed results, we see that the compressed sensing dynamic MR imaging algorithm, k-t FOCUSS enables high resolution time resolved contrast enhanced MR angiography.