• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.60-67
• /
• 2013

Preference studies regarding the elderly housing have been conducted to find out design features in specific needs of certain elderly groups with their various demographic characteristics. The purpose of this study was to investigate preference for accessible design features for the elderly and find out the differences in preference whether the cost information was given or not. Contrast to the previous studies, we suggested some alternatives to fulfill the accessible goals. Preference for each option was investigated and differences in preference with its cost information was also investigated. The total of 700 questionnaires were collected and analyzed using SPSS 18.0. As a result, to remove the level differences, respondents prefer installation of trench to installation of deck or ramp. When people received the cost information, the proportion of selection for each option has slightly changed. The findings of the study suggest that cost information is an important factor for choosing the option for removal of level difference, installation of sink design and holding bars, and installation of elevator. Regardless of age, the respondents prefer sliding door option (its cost is equal to the other option), one of the door option for bath room. It may be due to the relative small area for its installation. It was found that when people recognized the importance of the accessible design features higher, they are ore likely to pay for the option even though its cost is higher. The higher people evaluate the importance of accessible design features, the more they can pay for the option. In general, for the preference of alternatives, there are significant differences between the elderly and the younger.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.53-53
• /
• 2011

As the dimension of Cu interconnects has continued to reduce, its resistivity is expected to increase at the nanoscale due to increased surface and grain boundary scattering of electrons. To suppress increase of the resistivity in nanoscale interconnects, alloying Cu with other metal elements such as Al, Mn, and Ag is being considered to increase the mean free path of the drifting electrons. The formation of Al alloy with a slight amount of Cu broadly studied in the past. The study of Cu alloy including a very small Al fraction, by contrast, recently began. The formation of Cu-Al alloy is limited in wet chemical bath and was mainly conducted for fundamental studies by sputtering or evaporation system. However, these deposition methods have a limitation in production environment due to poor step coverage in nanoscale Cu metallization. In this work, gap-filling of Cu-Al alloy was conducted by cyclic MOCVD (metal organic chemical vapor deposition), followed by thermal annealing for alloying, which prevented an unwanted chemical reaction between Cu and Al precursors. To achieve filling the Cu-Al alloy into sub-100nm trench without overhang and void formation, furthermore, hydrogen plasma pretreatment of the trench pattern with Ru barrier layer was conducted in order to suppress of Cu nucleation and growth near the entrance area of the nano-scale trench by minimizing adsorption of metal precursors. As a result, superconformal gap-fill of Cu-Al alloy could be achieved successfully in the high aspect ration nanoscale trenches. Examined morphology, microstructure, chemical composition, and electrical properties of superfilled Cu-Al alloy will be discussed in detail.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.175-182
• /
• 2010

Objectives: This study examined how ethanolamines (EAs) with the same functional alcohol group ($HOCH_2CH_2$), such as mono-EA (MEA), di-EA (DEA), and tri-EA (TEA), in water-based metalworking fluids (wbMWFs) are vaporized, condensed, and transformed by heat generated during metalworking. Methods: Two types of experimental apparatus were manufactured to achieve these objectives. Results: Vaporization tests using a water bath showed that the vaporization rate increased markedly from $0.19\;mg/m^2{\cdot}min$ at $23.5^{\circ}C$ to $8.04\;mg/m^2{\cdot}min$ at $60^{\circ}C$. Chamber tests with a heat bulb revealed that "spiked" MEA was fully recovered, while only 13.32% of DEA and no TEA were recovered. Interestingly, non-spiked types of EAs were detected, indicating that heat could convert EAs with more alcohol groups (TEA or DEA) into other EAs with fewer group(s) (DEA or MEA). The EA composition in fresh fluid was 4% DEA, 66% TEA, and 30% MEA, and in used fluids (n = 5) was 12.4% DEA, 68% TEA, and 23% MEA. Conversion from TEA into DEA may therefore contribute to the DEA increment. Airborne TEA was not detected in 13 samples taken from the central coolant system and near a conveyor belt where no machining work was performed. The DEA concentration was $0.45\;mg/m^3$ in the only two samples from those locations. In contrast, airborne MEA was found in all samples (n = 53) regardless of the operation type. Conclusion: MEAs easily evaporated even when MWFs were applied, cleaned, refilled, and when they were in fluid storage tanks without any metalworking being performed. The conversion of TEA to DEA and MEA was found in the machining operations.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.227-235
• /
• 2012

Purpose: This study compared the surface hardness (Vickers) and microstructural characteristics between a type IV stone with and without die hardening treatment, a polyurethane die material. Methods: Materials used were a type IV stone(MG Crystal Rock), two die hardeners (Hardening bath, Epox-it), and a polyurethane resin material(Polyluck). Six specimens per group were prepared according to manufacturer's directions. The prepared specimens were tested by means of hardness test, one-way ANOVA analysis, scanning electron microscopic(SEM) observations and energy dispersive spectroscopic(EDS) analysis. Results: In the hardness test and its statistical analysis, there was no significant difference in the surface hardness between a type IV stone and type IV stone with die hardener coating, type IV stone mixed with an epoxy like material instead of water. In contrast, polyurethane resin material exhibited significantly greater surface hardness than other specimen groups (p<0.05). Conclusion: By considering the results of the hardness test, SEM observations and EDS analysis, although the die hardeners on type IV stone did not show remarkable improvement in surface hardness, the die hardener coating on the surface of type IV stone material did show decrease of microporous and improvement of surface defects.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.700-711
• /
• 2018

CdS synthesized by the chemical bath method at $70^{\circ}C$, has been used as an electron transport layer in the planar structure of the perovskite solar cells. A two-step spin process produced a mixed halide perovskite of $CH_3NH_3PbI_{3-x}Cl_x$ and a mixture of $PbCl_2$ and $PbI_2$ was deposited on CdS, followed by a sub-sequential reaction with MAI ($CH_3NH_3I$). The added $PbCl_2$ to $PbI_2$ in the first spin-step affected the structure, orientation, and shape of lead halides, which varied depending on the content of Cl. A small amount of Cl enhanced the surface morphology and the preferred orientation of $PbI_2$, which led to large and uniform grains of perovskite thin films. In contrast, the high content of Cl produces a new phase PbICl in addition to $PbI_2$, which leads to the small and highly uniform grains of perovskites. An improved surface coverage of perovskite films with the large and uniform grains maximized the performance of perovskite solar cells at 0.1 molar ratio of $PbCl_2$ to $PbI_2$. The depth profiling of elements in both lead halide films and mixed halide perovskite films were measured by Rutherford backscattering spectroscopy, revealing the distribution of chlorine along with the thickness, and providing the basis for the mechanism for enhanced preferred orientation of lead halide and the microstructure of perovskites.

• Journal of Animal Environmental Science
• /
• v.12 no.1
• /
• pp.7-12
• /
• 2006

Ammonia emission from swine production process originates from three major sources: manure storage facility, swine housing, and land application of manure. Most of the ammonia gas that are emitted from swine production operations is the by-product of aerobic or anaerobic decomposition of swine waste by microorganism. Knowing the ammonia emission rate is necessary to understand how management practices or alternative manure handling process could reduce impacts of this emission on the environment and neighbors. Ammonia gas emission from pig slurry is very difficult to predict because it is affected by many factors including wind speed of slurry surface, temperature or pH of the swine slurry, sort breed differences and classes, and diets. This study was carried out to effects of pH and temperature on ammonia gas emission from growing-finishing pig slurry. Treated far slurry in this study were pH and temperature. Results showed that pH of slurry variable changes 5, 6, 7, 8 upon an addition of NaOH and $HNO_3$, respectively. The temperature of the slurry which was contained in a water bath maintained at increasing levels ranging from 10 to $35^{\circ}C$. Ammonia emission rate of influenced pH and temperature such that the increase in pH or temperature resulted to an increase in ammonia emission. The ammonia gas was not detected at pH 5 and 6. Moreover, at a slurry of pH 8, the ammonia ranged from 28 to 60ppm and 8-29 ppm at slurry pH of 7 while temperature was 13 to $33^{\circ}C$. When slurry pH was>6, the ammonia emission was significantly increased according to rise in temperature in contrast to acid treatment of the pH. There was also a significantly increase in ammonia emission relative to slurry pH of 7 to 8. The above findings showed that to effectively reduce ammonia emission from slurry of growing-finishing pigs, the pH and temperature should be maintained a low levels.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.51-59
• /
• 2003

This study was carried out to evaluate the effect of different freezing and thawing rates on the viability, motility and acrosomal changes of frozen canine spermatozoa. The ejaculated semen was extended with Tris-egg yolk buffer containing 8% glycerol and equilibrated for 60 min after cooled to 4$^{\circ}C$ for 58 min. The straws were cryopreserved gradually by slow-cooling at different distance(6, 10 and 17 cm, respectively) from the liquid nitrogen (L$N_2$) to achieve temperature rate of 3, 8.9 and 19$^{\circ}C$ /min. Thawing of the straws was performed in a water bath fur 2 min at 37$^{\circ}C$ and 55$^{\circ}C$ , respectively. The motility of frozen-thawed spermatozoa was assessed by phase-contrast microscopy. To assess their viability and acrosome content, spermatozoa were stained with a vital stain and Fluorescence conjugated lectin Pisum Savitum Agglutinin (FITC/PAS), respectively. Concentration of the ejaculated fresh semen was normal range of 3.44 $\times$ 10$^{8}$ /ml. Freezing temperature were reduced to -110, -70 and -35$^{\circ}C$, as higher distance from liquid nitrogen, 6, 10 and 17 cm, respectively. Freezing at 3$^{\circ}C$/min in distance of 17 cm from liquid nitrogen yielded better motility, viability and rate of intact acrosome than 8.9 or 19$^{\circ}C$/min and the optimal thawing was 37$^{\circ}C$ for 2 min.

• Korean Journal of Biological Psychiatry
• /
• v.3 no.2
• /
• pp.277-287
• /
• 1996

Objective : It has been proposed that cognition and related aspects of mental functioning are decreased in depression as well as in alcoholism. The objective of the study was to compare behavioral side effects of paroxetine and amitriptyline in depressed patients accompanied by alcoholism. The focused comparisons were drug effects concerning psychomotor performance, cognitive function, sleep and daytime sleepiness during the first 2 weeks of treatment. Methods : After an alcohol detoxification period(3 weeks) and a washout period(1 week), a total of 20 male inpatients with alcohol use disorder (DSM-IV), who also had a major depressive episode(DSM-IV), were treated double-blind with paroxetine 20mg/day(n=10) or amitriptyline 25mg/day(n=10) for 2 weeks. All patients were required to have a scare of at least 18 respectively on bath the Hamilton Rating Scale far Depression(HAM-D) and Beck Depression Inventory(BDI) at pre-drug baseline. Patients randomized to paroxetine received active medication in the morning and placebo in the evening whereas those randomized to amitriptyline received active medication in the evening and placebo in the morning. All patients performed the various tasks in a test battery at baseline and at days 3, 7 and 14. The test battery included : critical flicker fusion threshold for sensory information processing capacity : choice reaction time for gross psychomotor performance : tracking accuracy and latency of response to peripheral stimulus as a measure of line sensorimotor co-ordination and divided attention : digit symbol substitution as a measure of sustained attention and concentration. To rate perceived sleep and daytime sleepiness, 10cm line Visual analogue scales were employed at baseline and at days 3, 7 and 14. The subjective rating scales were adapted far this study from Leeds sleep Evaluation Questionnaire and Epworth Sleepiness Scale. In addition a comprehensive side effect assessment, using the UKU side effect rating scale, was carried out at baseline and at days 7 and 14. The efficacy of treatment was evaluated using HAM-D, BDI and clinical global impression far severity and improvement at days 7 and 14. Results : The pattern of results indicated thai paroxetine improved performance an mast of the lest variables and also improved sleep with no effect on daytime sleepiness aver the study period. In contrast, amitriptyline produced disruption of performance on same tests and improved sleep with increased daytime sleepiness in particular at day 3. On the UKU side effect rating scale, mare side effects were registered an amitriptyline. The therapeutic efficacy was observed in favor of paroxetine early in day 7. Conclusion : These results demonstrated thai paroxetine in much better than amitriptyline for the treatment of depressed patients accompained by alcoholism at least in terms of behavioral safety and tolerability, furthermore the results may assist in explaining the therapeutic outcome of paroxetine. For example, and earlier onset of antidepressant action of paroxetine may be caused by early improved cognitive function or by contributing to good compliance with treatment.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.