• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.233-240
• /
• 2014

PURPOSE. To evaluate the effects of different abutment geometries in combination with varying luting agents and the effectiveness of different cleaning methods (prior to re-cementation) regarding the retentiveness of zirconia copings on implants. MATERIALS AND METHODS. Implants were embedded in resin blocks. Three groups of titanium abutments (pre-fabricated, height: 7.5 mm, taper: $5.7^{\circ}$; customized-long, height: 6.79 mm, taper: $4.8^{\circ}$; customized-short, height: 4.31 mm, taper: $4.8^{\circ}$) were used for luting of CAD/CAM-fabricated zirconia copings with a semi-permanent (Telio CS) and a provisional cement (TempBond NE). Retention forces were evaluated using a universal testing machine. Furthermore, the influence of cleaning methods (manually, manually in combination with ultrasonic bath or sandblasting) prior to re-cementation with a provisional cement (TempBond NE) was investigated with the pre-fabricated titanium abutments (height: 7.5 mm, taper: $5.7^{\circ}$) and SEM-analysis of inner surfaces of the copings was performed. Significant differences were determined via two-way ANOVA. RESULTS. Significant interactions between abutment geometry and luting agent were observed. TempBond NE showed the highest level of retentiveness on customized-long abutments, but was negatively affected by other abutment geometries. In contrast, luting with Telio CS demonstrated consistent results irrespective of the varying abutment geometries. Manual cleaning in combination with an ultrasonic bath was the only cleaning method tested prior to re-cementation that revealed retentiveness levels not inferior to primary cementation. CONCLUSION. No superiority for one of the two cements could be demonstrated because their influences on retentive strength are also depending on abutment geometry. Only manual cleaning in combination with an ultrasonic bath offers retentiveness levels after re-cementation comparable to those of primary luting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.407.1-407.1
• /
• 2016

Electrochromism is defined as a phenomenon which involves persistently repeated change of optical properties between bleached state and colored state by simultaneous injection of electrons and ions, sufficient to induce an electrochemical redox process. Due to this feature, considerable progress has been made in the synthesis of electrochromic (EC) materials, improvements of EC properties in EC devices such as light shutter, smart window and variable reflectance mirrors etc. Among the variable EC materials, solid-state inorganics in particular, metal oxide semiconducting materials such as nickel oxide (NiO) have been investigated extensively. The NiO that is an anodic EC material is of special interest because of high color contrast ratio, large dynamic range and low material cost. The high performance EC devices should present the use of standard industrial production techniques to produce films with high coloration efficiency, rapid switching speed and robust reversibility. Generally, the color contrast and the optical switching speed increase drastically if high surface area is used. The structure of porous thin film provides a specific surface area and can facilitate a very short response time of the reaction between the surface and ions. The large variety of methods has been used to prepare the porous NiO thin films such as sol-gel process, chemical bath deposition and sputtering. Few studies have been reported on NiO thin films made by using sol-gel method. However, compared with dry process, wet processes that have the questions of the durability and the vestige of bleached state color limit the thin films practical use, especially when prepared by sol-gel method. In this study, we synthesis the porous NiO thin films on the fluorine doped tin oxide (FTO) glass by using sputtering and anodizing method. Also we compared electrical and optical properties of NiO thin films prepared by sol gel. The porous structure is promised to be helpful to the properties enhancement of the EC devices.

• Toxicological Research
• /
• v.19 no.2
• /
• pp.99-104
• /
• 2003

This study was aimed to evaluate the effect of oxygen on motor activity and toxicity in male mice. The modified Porsolt forced swim test (FST) was used and the distance and time of movement by mice were analyzed in 15。C water bath for 20 minutes using the automatic Ethovision videotracking system. Analyses were carried out before and after 20 minutes of exposure to 10％-70％ concentration of normobaric oxygen. The effects of inspired oxygen tension on the distance and time of movement showed the similar trends, but changes in distance were more prominent. Both the distance and time of movement increased after exposure to 30％ and 40％ oxygen concentration. The distance and time of movement also increased upon exposure to 50％ and 60％ oxygen. In contrast, increases En movement and time under exposure to 21％ oxygen concentration were suppressed when exposed to over 50％ oxygen concentration. With exposure to 10％ oxygen, there was a significant decrease in the distance of movement and a slight suppression of movement time. During the swim test, 12.5％, 37.5％, and 87.5％ of the mice drowned after exposure to 10％, 60％, and 70％ oxygen concentration, respectively. These results suggest that motor activity can be enhanced by inspired oxygen up to 40％ concentration. When hypoxic and hyperoxic oxygen exposure over 50％, motor activity is reduced and toxicity may be induced.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.2
• /
• pp.27-32
• /
• 1989

The effect of quenchant temperature on the surface residual stress was studied for AISI 8620 steel. Specimens were carburized at $900^{\circ}C$ in all case type furnace using a gas-base atmosphere of methanol cracked and liquefied petroleum gas, and then subjected to single reheat quenchant in oil or salt bath in the temperature range of $60^{\circ}C$ to $300^{\circ}C$. After carburizing and reheat Quenching, residual stress was measured by the hole drilling method. Experimental results showed that the surface residual stress was increased as the quenchant temperature was raised. This is in contrast to the fact that the formation of phase of low transformation strain such as bainite results in lower surface compressive stress. The greater compressive stress observed in specimens Quenched at higher temperature may be attributed to the shifting of the transformation start point farther from the surface, as was reported in other carburizing steels.

• Korean Journal of Ecology and Environment
• /
• v.35 no.2 s.98
• /
• pp.141-144
• /
• 2002

The construction of river mouth dam has prevented seawater from backwarding to upstream in Kum river estuary since 1990. Field observation on environmental factors, and zooplankton and phytoplankton dynamics have been carried out three times with two month interval in the summer and autumn in 2000 at three selected stations in Kum river estuary. Blockade of seawater flowing backward to upstream caused sharp contrast of zooplankton fauna and phytoplankton flora between upstream and downstream of the river mouth dam. Freshwater cladocerans i.e., Bosmina longisrostris and Daphnia galeata dominated in the upstream, and marine copepods of Acartia omorii and Paracalanus crassirostris occurred abundantly in downstream of the dam. Freshwater diatoms did not distributed in the downstream of the dam except Melosira varians, while marine diatom of Cylidrotheca closterium occurred in benthic waters bath in upstream and downstream of the dam. The construction of the river mouth dam seems to play an ecological role to blockade the input of marine organism into the upstream in Kum river estuary.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.3
• /
• pp.305-313
• /
• 1999

To explore whether $Cl^-$ channel blockers interact with the ATP-sensitive $K^+\;(K_{ATP})$ channel, I have examined the effect of two common $Cl^-$ channel blockers on the $K_{ATP}$ channel activity in isolated rat ventricular myocytes using patch clamp techniques. In inside-out patches, 4,4'-diisothio-cyanatostilbene- 2,2'-disulfonic acid (DIDS) and niflumic acid applied to bath solution inhibited the $K_{ATP}$ channel activity in a concentration-dependent manner with $IC_{50}$ of 0.24 and 927 ${\mu}M,$ respectively. The inhibitory action of DIDS was irreversible whereas that of niflumic acid was reversible. Furthermore, DIDS-induced block was not recovered despite exposure to ATP (1 mM). In cell-attached and inside-out patches, DIDS blocked the pinacidil- or 2,4-dinitrophenol (DNP)-induced $K_{ATP}$ channel openings. In contrast, niflumic acid did not block the pinacidil-induced $K_{ATP}$ channel openings in inside-out patches, but inhibited it in cell-attached patches. DIDS and niflumic acid produced additional block in the presence of ATP and did not affect current-voltage relationship and channel kinetics. All these results indicate that DIDS among $Cl^-$ channel blockers specifically blocks the cardiac $K_{ATP}$ channel.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.1
• /
• pp.145-150
• /
• 2010

The regenerated silk fibroin with various molecular weights (MW) was prepared by different dissolution condition and the effect of coagulant on the wet spinnability of the various MW silk fibroin solutions dissolved in formic acid was investigated by the observation of wet spun filament in coagulant and the measurement of maximum draw ratio. The observation on the wet spun filament in coagulation bath revealed that good fibers without bead were formed in a high MW and a very high MW silk fibroin samples. In contrast, beads were observed in the silk fibroin sample with medium MW. The maximum draw ratio of wet spun silk fibroin filament decreased with MW reduction. The decrease of maximum draw ratio in isopropanol, acetone, DMF and THF was remarkably higher than that in methanol and ethanol, indicating that the coagulant type strongly influenced the wet spinnability. The two simple evaluation methods used in this study showed complementary information for wet spinnability: (a) The observation of filament in coagulant was effective to check a continuous fiber formation and a bead formation, and (b) the maximum draw ratio measurement was useful to examine the post drawing ability related to molecular orientation.

• Journal of Hospice and Palliative Care
• /
• v.24 no.2
• /
• pp.109-115
• /
• 2021

Purpose: This study aimed to investigate the effects of aroma foot baths on stress and sleep in terminally ill cancer patients. Methods: We performed a non-randomized intervention-control study with 30 terminal cancer patients who were admitted to a palliative care unit. Participants responded to questionnaires on stress and sleep before and after a 5-day interval. The intervention group received a daily aroma foot bath for 5 days. We performed multivariate regression analysis to examine the changes in outcomes on stress and sleep for the intervention group compared to the control group. Results: The differences in baseline characteristics between groups, excluding subjective economic status and general weakness, did not show statistical significance. In contrast to the control group, the intervention group showed a statistically significant change in physical stress and psychological stress levels, but significant changes were not observed in quality of sleep. Compared to the control group, the intervention group showed a significant reduction in physical stress (P=0.068) and psychological stress (P=0.021). Conclusion: Aroma foot baths are effective for reducing stress in patients hospitalized with terminal cancer.

• Fisheries and Aquatic Sciences
• /
• v.20 no.7
• /
• pp.12.1-12.7
• /
• 2017

Soft tunic syndrome (STS) is a protozoal disease caused by Azumiobodo hoyamushi in the edible ascidian Halocynthia roretzi. Previous studies have proven that combined formalin-hydrogen peroxide ($H_2O_2$) bath is effective in reducing STS progress and mortality. To secure target animal safety for field applications, toxicity of the treatment needs to be evaluated. Healthy ascidians were bathed for 1 week, 1 h a day at various bathing concentrations. Bathing with 5- and 10-fold optimum concentration caused 100% mortality of ascidians, whereas mortality by 0.5- to 2.0-fold solutions was not different from that of control. Of the oxidative damage parameters, MDA levels did not change after 0.5- and 1.0-fold bathing. However, free radical scavenging ability and reducing power were significantly decreased even with the lower-than-optimal 0.5-fold concentration. Glycogen content tended to increase with 1-fold bathing without statistical significance. All changes induced by the 2-fold bathing were completely or partially restored to control levels 48 h post-bathing. Free amino acid analysis revealed a concentration-dependent decline in aspartic acid and cysteine levels. In contrast, alanine and valine levels increased after the 2-fold bath treatment. These data indicate that the currently established effective disinfectant regimen against the parasitic pathogen is generally safe, and the biochemical changes observed are transient, lasting approximately 48 h at most. Low levels of formalin and $H_2O_2$ were detectable 1 h post-bathing; however, the compounds were completely undetectable after 48 h of bathing. Formalin-$H_2O_2$ bathing is effective against STS; however, reasonable care is required in the treatment to avoid unwanted toxicity. Drug residues do not present a concern for consumer safety.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.75-81
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on BCTMP fibers and handsheets properties. DES was prepared using lactic acid and betaine (LB), and the molar ratio of these two components mixtures was controlled to 2:1 (LB 2:1) and 5:1 (LB 5:1). As results, 2% of BCTMP pulp (o.d. weight) was extracted when it was treated by LB 5:1 at $50^{\circ}C$ for 12 hours, stirring constantly at 120 rpm. In contrast, lignin was not extracted when BCTMP was mildly treated by the LB DES mixed with 50% of distilled water at the reacting condition of temperature $60^{\circ}C$ for 2 hours using water bath. These results indicate that conditioned water content and adequate reaction time are needed to achieve effective extraction of lignin. It was also found that stiffening of cellulose fiber due to the mild treatment of LB DES to BCTMP fiber leads to the increase of paper bulk without the loss of strength.