• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.407-414
• /
• 2014

The aim of the present study was to carry out quantitative analysis of spatial resolution for the influence of the focus size and digital image post-processing on the Computed Radiography (CR). The modulation transfer functions of an edge measuring method (MTF) was used for the evaluation of the spatial resolution. The focus size of X-ray tube was used the small focus (0.6 mm) and the large focus (1.2 mm). We evaluated the 50% and 10% of MTF for the enhancement of edge and contrast by using multi-scale image contrast amplification (MUSICA) in digital image post-processing. As a results, the edge enhancement than the contrast enhancement were significantly higher the spatial resolution of MTF 50% in all focus. Also the spatial resolution of the obtained images in a large focus were improved by digital image processing. In conclusion, the results of this study should serve as a basic data for obtain the high resolution clinical images, such as skeletal and chest images on the CR.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.65-71
• /
• 2005

The present study performed subjective evaluation experiments using slides and scale down models in order to propose guidelines for lighting environment desirable for each behavior in the house. The evaluation measure was composed of 20 mood items and 15 behavior items. As for experiment methods, the slide experiment used SD method, and the scale down model experiment used Scheffe's paired comparison. The results of this study are as follows. 1) Desirable lighting environment for working and talking is active atmosphere. 2) Lighting environment desirable far relaxation is to heighten lighting contrast using candescent lamps and local lights. In other words, active atmosphere, which is desirable for working and talking, is not desirable for relaxation. 3) Lighting for working requires bright illuminance and high color temperature(6000k). 4) Lighting for relaxation requires somewhat low brightness regardless of color temperature. If the light is bright it is better to use lamps of low color temperature. 5) for conversation, bright illuminance is more desirable than dark one, and the most adequate color temperature is 4000K.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.198-201
• /
• 2004

We have developed a multi-domain vertically aligned liquid crystal display (MVA-LCD) that produces natural gray-scale images even at high viewing angles. We divided each pixel into two areas and set different threshold voltages for each sub-area. A transparent electrode in a sub-area is not connected directly to the source electrodes but via the capacitance of the SiN layer. In particular, light-orange skin color appears very natural, even at a high inclination angle. The contrast ratio is over 500 in the normal direction and over 10 from any viewing angle.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.58.1-58.1
• /
• 2013

The main idea of the Alcock-Paczynski (AP) test is that, if we use a wrong distance-redshift relation to infer the shape of a spherical object in the Universe, this object may look non-spherical. To probe the cosmic expansion history through the AP test, the key point is to find something which is known as spherical in the Universe. We propose two possible ways applying the AP test to the large scale structure (LSS): 1) Based on the observed galaxies or quasars, one built up the beta-skeleton tracing the LSS, and investigating the inhomogeneity of the connections; 2) One reconstructs the smoothed density-contrast gradient field based on LSS observations, and investigating the inhomogeneity of the gradient vectors. Compared with some existed methods probing AP effect through 2-point correlation function, galaxy pairs, or voids, our methods have various advantages: 1) The information of both the high and low dense regions of the LSS are taken into account. 2) The redshift space distortion as the main contamination to the AP effect can be easily removed.

• Interaction and multiscale mechanics
• /
• v.2 no.3
• /
• pp.235-261
• /
• 2009

This study illustrates the differences between the elasto-plastic cap model and Lade's model with Cosserat rotation through the analyses of two large-scale geosynthetic-reinforced soil (GRS) retaining wall tests that were brought to failure using a monotonically increasing surcharge pressure. The finite element analyses with Lade's model were able to reasonably simulate the large-scale plane strain laboratory tests. On average, the finite element analyses gave reasonably good agreement with the experimental results in terms of global performances and shear band occurrences. In contrast, the cap model was not able to simulate the development of shear banding in the tests. In both test simulations the cap model predicted failure loads that were substantially less than the measured ones.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.41.2-42
• /
• 2017

We are planning to conduct Monte Carlo simulations for the Na exospheres of the Moon including localized sources on the surface in addition to the global isotropic and anisotropic sources, which were previously studied. The simulation models are based on Lee et al. (2011), who presented a satisfactory interpretation for the isotropic and anisotropic sources of the Lunar Na exosphere. We will compare our preliminary models with existing and the future lunar tail/exospheric observations by the LADEE and NASA's coronagraph-monitoring programs. Ground-based data show global-scale outflows of Na in contrast to small-scale data usually obtained near the orbits of spacecraft.

• Journal of Korea Multimedia Society
• /
• v.20 no.9
• /
• pp.1481-1490
• /
• 2017

This paper presents an image quality enhancement algorithm for dark image acquired under poor lighting condition. Various retinex algorithms which are human perception-based image processing methods were proposed to solve this problem. Although MSR(Multi-Scale Retinex) among these algorithm works well under most lighting condition, it shows color degradation because their separate nonlinear processing of RGB color channels. To compensate for the loss of the color, MSRCR(Multi-Scale Retinex with Color Restoration) was proposed. However, it requires high computational load and has additional parameters that need to be adjusted according to input image. In order to overcome this problem, a new retinex algorithm based on MSR is proposed in this paper. The proposed method consists of V channel MSR, saturation correction, and separate contrast enhancement process. Experimental results show that the subjective and objective image quality of the proposed method better than those of the conventional methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.93-93
• /
• 2010

In this talk, I will introduce a reactive force field (ReaxFF) molecular dynamics (MD) simulation. In contrast to common MD simulations with empirical FFs, we can predict chemical reactions (bond breaking and formation) in large scale systems with the ReaxFF simulation where all of the ReaxFF parameters are from quantum mechanical calculations such as density functional theory to provide high accuracy. Accordingly, the ReaxFF simulation provides both accuracy of quantum mechanical calculations and description of large scale systems of atomistic simulations at the same time. Here, I will first discuss a theory in the ReaxFF including the differences from other empirical FFs, and then show several applications for studying chemical reactions of SiHx radicals on Si surfaces, which is an important issue in Si process.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.90-94
• /
• 2011

Ag metallic particles from nano-scale to submicron-scale are combined with organic solvent to provide fine circuits and interconnection. Ink-jet printing with Ag nano particle inks demonstrated the potentials of the new printed electronics technology. The bonding at the interface between the Ag wiring layer and the various substrates is very important. In this study, the details of interfaces in Ag wiring are investigated primarily by microstructure observation. By adjusting the materials and sintering conditions, nicely formed interfaces between Ag wiring and Cu, Au or organic substrates are achieved. In contrast, transmission electron microscope (TEM) image clearly shows interface debonding between Ag wiring and Sn substrate. Sn oxides are formed on the surface of the Sn plating. The formation of these is a root cause of the interface debonding.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.99-107
• /
• 2019

Retinex-based image enhancement is a technique that utilizes the property that the human visual characteristics are sensitive to the difference from the surrounding pixel value rather than the pixel value itself. These Retinex-based algorithms show different characteristics of the improved image depending on the applied color space or gamma correction. In this paper, we set eight different experimental conditions according to the application of color space and gamma correction, and analyze the objective and subjective performance of each Retinex based image enhancement algorithm and apply it to the implementation of Retinex based algorithm. In the case of gamma correction, quantitative low entropy images and low contrast images are obtained. The application of Retinex technique in HSI color space rather than RGB color space is found to be high in overall subjective image quality as well as maintaining color.