• 한국음향학회지
• /
• 제41권4호
• /
• pp.389-396
• /
• 2022

본 논문은 냉장고 수축팽창 소음의 원인 및 메커니즘을 파악하고 소음 감소 방법을 제안한다. 냉장고에서 발생하는 수축팽창 소음은 주로 내부부품 사이의 접촉면에서 발생하는 스틱슬립 현상에 의한 것이다. 스틱슬립 현상을 일으키는 요인을 규명하기 위해 마찰실험이 수행되었다. 또한 내부부품의 진동레벨을 측정하여 수축팽창 소음의 특성 및 위치를 규명하였다. 실험 결과를 바탕으로 요인별 소음 특성을 검증하는 실험이 진행되었다. 이를 통해 마찰실험과 냉장고 수축팽창 소음 발생 위치와 빈도가 동일한 것을 확인하였다. 하중적재로 수직력이 증가하면 진동레벨도 증가하였다. 또한 표면거칠기를 증가하였을 때 수축팽창 소음이 저감되는 것으로 확인되었다. 따라서, 마찰실험 결과와 동일하게 접촉면의 표면거칠기를 증가하는 것이 수축팽창 소음저감 방법이라는 결론을 도출하였다.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.723-729
• /
• 2013

The contraction and expansion noise of a refrigerator are investigated, and some effective methods are proposed to reduce the level and occurrence frequency of noise. First, the noise of a refrigerator is measured to estimate the frequency spectrum and occurrence frequency of noise. Second, a sound visualization was conducted using an acoustic camera to determine the location of the noise source. From the results, it was observed that the internal part mainly producing noise was the third shelf in the freezer room. A method to estimate the acceleration on the location of the noise source is introduced to analyze the contraction and expansion noise precisely and accommodate experimental convenience. Noise reduction methods such as the replacement of the existing shelf with glass shelves, adoption of rail slides, and increase of roughness on the contact surface of the shelf are proposed and tested.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.344-351
• /
• 2019

본 연구에서는 수축 및 팽창 소음 발생 메커니즘을 분석하고, 냉장고 운전 중에 소음발생 빈도를 줄이기 위한 효과적인 방법을 제안하였다. 냉장고의 수축팽창음 발생 시에 제품의 품질비용 상승에 영향을 주기 때문에 저감이 필요하다. 먼저, 무향실에서 측정된 음압 신호를 이용하여 주파수 스펙트럼 분석을 수행하여 소음의 특성과 발생 빈도를 분석하였다. 둘째, 열변형 해석을 수행하여 소음원의 위치를 예측했다. 분석결과에서 가장 큰 열변형은 냉동실의 왼쪽 내부 케이스의 중간에서 발생하였다. 또한 음원 위치의 가속도 레벨을 평가한 결과, 소음을 발생시키는 내부 부품이 냉동실의 세 번째 선반임을 알 수 있었다. 냉장고의 중앙 ABS(Acrylonitrile Butadiene Styrene) 두께 증가에 의한 열변형 저감을 통하여 수축팽창음을 저감할 수 있는 방법을 제안하였다.

• 한국음향학회지
• /
• 제39권2호
• /
• pp.98-104
• /
• 2020

에어컨 운전 중에 발생하는 실내기의 수축팽창 소음 현상을 분석하고, 발생위치를 평가한다. 그리고 마찰실험을 통하여 수축팽창 소음을 유발하는 인자를 규명하고자 한다. 먼저 항온·항습챔버에서 운전 환경 조건별로 수축팽창 소음의 발생횟수 및 특성을 분석하고, 분해법을 이용하여 냉방 및 난방 시 모두 하부 데코에서 발생하는 것을 확인하였다. 실내기에서 발생하는 수축팽창 소음은 하부 데코와 연결되는 부품들과의 체결부에서 발생하는 스틱슬립 현상에 의한 것으로 이러한 소음을 유발하는 인자를 규명하기 위하여 마찰실험을 진행하였다. 또한 마찰실험 결과의 효과적 분석을 위하여 십점평균 산출법을 도입하고, 실험 결과에서 Acrylonitrile Butadiene Styrene(ABS) 재질 간에 접촉하면 스틱슬립 현상을 유발하며 체결부의 양면에 표면조도를 증가하는 것이 소음저감에 효과적임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.360-363
• /
• 2005

Biomimetic actuators composed of cellophane with an electrically conducting polyaniline(PANI) film have been fabricated and tested in air ambience conditions doped with two different counter ions such as perchlorate (${ClO_4}^-$) and tetrafluoroborate (${BF_4}^-$). Fabrication of the trilayer CP//CELLOPHANE//CP substantially enhanced the tip displacement (13.2mm) compared to the small displacement (8.3mm) of the bilaye. CP//CELLOPHANE. The ion migration among layers is the main factor behind the expansion of cellophane, while the expansion/contraction of PANI are dependent on the redox reaction of the polymer. The displacement of the composite is dominated by the humidity content. This implies that the actuation principle is possibly due to the assistance of water existing.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1680-1691
• /
• 2004

One of the representative methods of optical flow is a gradient method which estimates the movement of an object based on the differential of image brightness. However, the method is ineffective for large displacement of the object and many improved methods have been proposed to copy with such limitations. One of these improved techniques is the multigrid processing, which is used in many optical flow algorithms. As an alternative novel technique we have been proposing an orthogonal functional expansion method, where whole displacements are expanded from low frequency terms. This method is expected to be applicable to flow estimation with large displacement and deformation including expansion and contraction, which are difficult to cope with by conventional optical flow methods. In the orthogonal functional expansion method, the apparent displacement field is calculated iteratively by a projection method which utilizes derivatives of the invariant constraint equations of brightness constancy. One feature of this method is that differentiation of the input image is not necessary, thereby reducing sensitivity to noise. In this paper, we apply our method to several real images in which the objects undergo large displacement and/or deformation including expansion. We demonstrate the effectiveness of the orthogonal functional expansion method by comparing with conventional methods including our optimally scaled multigrid optical flow algorithm.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.126-135
• /
• 1995

An exhaust muffler is one of the simple and effective means to meet the demand for a quiet vehicle, and it deserves a close attention to effectively reduce the engine noise. The transfer function technique is one of the tools that have been used to analyze the noise characteristics of the exhaust muffler. In this paper we obtained a transfer function using the forward-going and backward-going components of sound pressure in the exhaust muffler, which is compatible wiht lattice filter algorithm. This form of transfer function is obtained for the basic elements of a muffler, such as uniform tube, open termin- ation, closed termination, anechoic termination, expansion, contraction, extended-tube resonator, hole, Helmholtz resonator, and concentric hole-cavity resonator. The results are combined to produce the transfer function of various types of mufflers. With this transfer function we calculate the transmission and insertion losses of mufflers, and examined the effects of various design parameters. Comparisons were made between the calculation and experimental results, which showed a good agreement, and we conclude that the transfer function of lattice form can be used to analyze the noise characteristics of the exhaust mufflers.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.27-33
• /
• 2005

골격선 추출에 대한 향상된 디지털 이미지를 획득하기 위해서 효과적인 골격화 방법을 제안한다. 제안한 방법은 임계값을 이용한 이진화를 거친 후에 본 방법 을 적용하여 영상 골격화 효율을 높이고자 한다. 골격선의 비교분석을 위해서 기존의 골격화 방법들과 SPTA방법을 사용하였다. 기존방법들의 단점은 확장과 수축이 심하고 잡영가지로 인해서 원형의 영상을 유지하기 어렵다. 이러한 단점을 보안한 새로운 방법인 SPTA방법 을 제안한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1185-1191
• /
• 2000

In general, the strength of hull structures can be estimated from stress evaluation considering static and hydro-dynamic load due to sea-wave. However, war ships such as submarine, have frequently experienced the underwater explosion and local structures of ship as well as hull girder can be damaged by the dynamic response excited from underwater non-contact explosion. When explosion happens at underwater, shock wave is radiated In early short time, then gas bubbles are generated, and expansion and contraction are repeated as they float to the surface. The shock wave causes the damage of equipment and its supporting structures, on the other hand, the hull girder strength can be lost by resonance between bubble pulsation and lowest ship natural vibration period. In this paper, the hydro-Impulse force due to bubble was calculated. Based on these results the hull girder strength of submarine was estimated from transient response analysis by using NASTRAN. Also, shock analysis for some equipment supporting structures was carried out by using DDAM. In order to evaluate the strength of these local structures due to shock wave.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.453-458
• /
• 2011

Air preheater uses the waste heat of the gas which burnt from the boiler from the thermal power plant. Air preheater it is established in the exit of the boiler follows in change of temperature combustion gas and the vibration which it follows in thermal expansion and contraction occurs. Air preheater with ruse the gas the seal the place where it includes a gap in the structure which it does, the vibration which it follows in change of temperature fluctuates the displacement of gap, fluctuation of the leakage quantity which occurs from gap there is a possibility of decreasing an effect to system. Part system it will be able to control the interval of gap in order, control mechanism about under establishing the place where it does the gap control actively, measures a gap the displacement sensor for is necessary. Like this displacement sensor the condition must do continuous running from atmosphere of high temperature was demanded all. This paper investigates the implementation instance of hazard existing which implement the high temperature displacement sensor, it analyzes, produces the result which it examines a model, it was a presentation. These results with the fact that it will contribute in the research for the implementation and a localization of the high temperature displacement sensor and advanced air preheater.