• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.16-18
• /
• 2013

A fire outbreak in a reinforcement concrete structure looses the organism by different contraction and expansion of hardened cement pastes and aggregate, and causes cracks by thermal stress, leading to the deterioration of the durability. So, concrete reinforcement structure is damaged partial or whole structure system. Therefore accurate diagnosis of deterioration is needed based on mechanism of fire deterioration in general concrete structures. Fundamental information and data on the properties of concrete exposed to high temperature are necessary for accurate diagnosis of deterioration. In this study, consider case of investigation methods and repair work in fire damaged structure concrete.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.265-266
• /
• 2006

Superconductor is developed for applications in high-power devices such as power-transmission cables, transformers, motor and generators. In such applications, HTS tapes are subjected to various kinds of stress or strain. In the fabrication of the devices, the critical current (Ic) of the high temperature superconductor degrades due to many reasons including the tension applied by bending, twist and thermal contraction. In particular manufactured HTS cable, we need pitch angle controls. This paper is analyzed that Ic characteristics is changed pitch angle of HTS tape. These results will amount the most important basis data in HTS cable.

• Clinics in Shoulder and Elbow
• /
• 제22권2호
• /
• pp.106-109
• /
• 2019

Acromial fractures are well-documented complications subsequent to reverse shoulder arthroplasty (RSA), and most appear as stress fractures with no history of single trauma. To date, no study has reported the occurrence of acute displaced acromial fracture due to sudden strong deltoid contraction during heavy work. Displacement of the fracture results in a challenging surgery since it is difficult to obtain adequate fixation in thin and osteoporotic bones. We report a rare case of acute displaced acromial fracture after successful RSA treatment, using a novel technique of open reduction and internal fixation, applying two 4.5 mm cannulated screws and lateral clavicle precontoured plate.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권4호
• /
• pp.41-45
• /
• 2007

Superconductor is developed for applications in high-power devices such as power-transmission cables, transformers, motor and generators. In such applications, HTS tapes are subjected to various kinds of stress or strain. AC loss is also important consideration for many large-scale superconducting devices. In the fabrication of the devices, the critical current $(I_c)$ of the high temperature superconductor degrades due to many reasons including the tension applied by bending and thermal contraction. These bending or tension reduces the $I_c$ of superconducting wire and the $I_c$ degradation affects the AC loss of the wire. The $I_c$ degradation and AC loss (self field loss) of Bi-2223 HTS and Coated conductor were measured under tension and bending conditions at 77K and self-field.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.83-97
• /
• 2024

It is important to make reasonable prediction about the long-term deformation of high rockfill geostructures. However, the deformation is usually underestimated using the rockfill parameters obtained from laboratory tests due to different size effects, which make it necessary to identify parameters from in-situ monitoring data. This paper proposes a novel hybrid back-analysis method with a modified objective function defined for the time-dependent back-analysis problem. The method consists of two stages. In the first stage, an improved weighted average method is proposed to quickly narrow the search region; while in the second stage, an adaptive response surface method is proposed to iteratively search for the satisfactory solution, with a technique that can adaptively consider the translation, contraction or expansion of the exploration region. The accuracy and computational efficiency of the proposed hybrid back-analysis method is demonstrated by back-analyzing the long-term deformation of two high embankments constructed for airport runways, with the rockfills being modeled by a rheological model considering the influence of stress states on the creep behavior.

• 대한의용생체공학회:의공학회지
• /
• 제23권6호
• /
• pp.437-449
• /
• 2002

관상동맥은 체순환 동맥과 비교하여 매우 다른 유동조건을 갖는다. 본 연구에서는 이러한 관상동맥의 유동조건이 다른 혈관과 비교하여 동맥경화의 생성과 발전에 어떤 영향을 미치는지를 협착된 혈관 모델의 혈류역학적 전산유체해석을 통해 분석하였다. 연구 결과, 협착된 관상동맥 모델의 유동장과 벽면전단응력의 분포는 복부 대동맥 및 고동맥과 비교하여 큰 차이점을 보였다. 관상동맥은 혈관 지름이 혈류량에 비해 상대적으로 작으므로 큰 벽면전단응력값을 보이는 반면에, 혈관 협착부 목 후방부에 하나의 보텍스만 보이는 단순한 유동장 분포를 보였다. 한편, 복부대동맥과 고동맥 모델은 협착부 목 전반부와 후방부에 여러 개의 보텍스를 나타내는 복잡한 유동장을 형성하였다. 관상동맥 모델에서는 임피던스 페이즈앵글이 음의 큰 값을 가질 때에 벽면전단응력의 크기가 증가하고 재순환영역이 증가함이 관찰되었다. 그러므로 심장의 수축운동과 -110。에 이르는 관상동맥의 큰 음의 임피던스 페이즈앵글 값은 동맥경화를 촉진시키는 유동환경을 조성함을 알 수 있었다.

• 한국도로학회논문집
• /
• 제4권3호
• /
• pp.35-42
• /
• 2002

본 연구는 동절기에 많이 발생하는 포장의 저온균열에 대한 폴리머 개질 아스팔트 혼합물의 저항 특성을 알아보기 위하여 수행하였다. 저온에서의 간접인장강도를 측정 분석한 결과 혼합물들이 $-10^{\circ}C의 저온 대에서 최대 인장강도를 나타냈다. 최대 인장강도를 보이는 온도 이하에서는 시차열 응력이 인장강도 이상으로 발생하여 내부에 손상이 발생하기 때문에 나타나는 인장강도 저하현상을 ITS 시험으로 증명하여 보였다. 저온의 시험 결과는 폴리머 개질 아스팔트 혼합물이 일반 아스팔트 혼합물에 비하여 보다 낮은 온도에서까지도 강도가 높게 나타나 폴리머 개질에 따른 효과를 보였으며, 바인더가 저온균열에 대한 저항에 큰 영향을 미치는 것으로 나타났다. 따라서 추운 지역에서는 저온균열을 예방하기 위하여 폴리머 개질 아스팔트의 사용이 추천된다.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.19-25
• /
• 2016

Connectors are very important components that transmit electric signals to different parts. It must maintain intensity of the connector to prevent defects from impact and maintain contact to transmit electric signals. Most of the external parts of the connector, which act as the main framework, are formed by injection molding. However, bend deformation occurs for injection molded products due to the residual stress left inside the product after product molding. When the bend deformation is large, it does not come into complete contact when being assembled with other parts, which leads to connector contact intensity not being properly maintained. In result, the main role of the connector, which is to transmit electric signals, cannot be performed. In order to address this problem, this study conducted bend deformation cause analysis through bend deformation analysis to predict and prevent bend deformation of housings and wafers, which are injection molded products of pressure welded connectors that are normally applied in compact mobile and display products. Bend deformation analysis was carried out by checking the charging time, pressure distribution and temperature distribution through wire to board connector wafer and housing injection molding analysis. Based on the results of the bend deformation analysis results, the cause of the bend deformation was analyzed through deformation resulting from disproportional cooling, deformation resulting from disproportional contraction, and deformation resulting from ingredient orientation. In result, it was judged that the effects for bend deformation were biggest due to disproportional contraction for both the pressure welded connector wafer and housing.

• 한방안이비인후피부과학회지
• /
• 제22권1호
• /
• pp.157-171
• /
• 2009

Objective : The face is very important for human communication. So facial palsy patients experience not only physical disturbances but also serious emotional stress. Therefore the focus of treatment must be to not only aid the recovery of objective symptoms but also the improvement of subjective quality of life. However there has not been enough Oriental Medical study in this field until now. Thus this study was begun to suggest a useful index for the treatment of facial palsy. Methods : Grade of paralysis, sequelas, and quality of life were used for evaluation. To evaluate Grade of paralysis, House-Brackman Grade was used as the Gross scale and Kim's Grade was used as the Regional scale. Sequelas were evaluated by muscle contraction, synkinesis, NA, and grade of philtrum tilt. Quality of life was evaluated by SF-36v2, Facial Disability Index, and Vas. Results & Conclusion : 1. The change of grade of paralysis between the early and the present time reveals remarkable improvement statistically. 2. There was a remarkable improvement in all parts of quality of life except several areas of SF-36(RP, RE, MH, VT) 3. In only PF(Physical Function) of FDI, quality of life increased remarkably according to the improvement of grade of paralysis. 4. There is the positive relationship among Kim's grade, HB grade and Synkinesis 2. 5. Synkinesis among sequelas has the greatest effect on quality of life. And muscle contraction, change of NA, and grade of philtrum tilt also affect quality to some extent. 6. There was no remarkable relationship between the period of illness and change of quality of life. 7. Change of NA is shown after 3 months of illness and synkinesis becomes worse after 6 months of illness.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.