• PNF and Movement
• /
• v.17 no.3
• /
• pp.487-497
• /
• 2019

Purpose: This tutorial review investigated the effect of prior fatigue and passive stretches on eccentric contraction-induced muscle injuries, as well as the underlying mechanisms of eccentric contraction-related injuries. Methods: Contraction-induced muscle damage is the most common disabling problem in sports and routines. The mechanisms underlying the pathology and prevention of muscle damage lessened by prior fatigue or stretches are critical in assessing musculoskeletal injuries. Even though there are treatments to reduce eccentric contraction-induced muscle injuries, fatigue negatively influences them. Therefore, we reviewed previous studies on eccentric contraction-induced muscle injuries with prior treatments using the MEDLINE and PubMed databases. Results: Prior passive stretching had a preventative and therapeutic effect, but prior lengthening contractions did not. On the other hand, prior isometric contractions involving relatively small forces may not provide a sufficient stimulus to induce protection. As a result, high force isometric contractions may be necessary. The studies supported the positive effects of prior fatigue, concluding that it was a factor in determining the amount of damage caused by eccentric exercise. This was due to a reduction in force and increased temperature. Studies that did not support the positive effects of prior fatigue concluded that a shift in optimal length to a longer length and reduced energy absorption during lengthening are evidence that fatigue is not related to muscle injuries induced by lengthening. Conclusion: The variability of the experiment models, conditions, muscles, and treatment methods make it necessary to interpret the conditions of previous studies carefully and draw conclusions without making direct comparisons. Thus, additional studies should be carefully conducted to investigate the positive effect of fatigue on lengthening.

• Journal of the Korean Society of Costume
• /
• v.58 no.2
• /
• pp.162-180
• /
• 2008

The purpose of this study is to find the basic design factors that affect the changes in body surface lines caused by lower limb movements, thereby resulting in slacks that fit well regardless of whether the human form is static or in motion. Using unmarried female university students aged 18-24 as subjects, a total of 32 body surface lines (15 body surface total lines and 17 body surface segment lines) were measured in one static and 9 movement poses, The analysis first involved the calculation of the expansion and contraction rates per body part in body surface line in 9 lower limb movements, Second, a factor analysis was conducted using the expansion and contraction rates of these changes in body surface line. The results of this study are as follows, According to the factor analysis, basic design factors that affect changes in body surface lines comprised 8 types of factors as illustrated in fig, 2-fig, 9, which explained 79.2% of total variate for the variables studied, Factor 1, comprising the lower segment of center back leg line, center front leg line and inner leg line, and lower limb girth except midway thigh girth and ankle girth below hip girth, accounted for 30.3% of total variance, Factor 2, comprising waist girth, the total and upper segment of center back leg line and center tront leg line, and front and back segment of crotch length, explained 17.4% of total variance, Factor 3, the total and upper segment of lateral leg line at the center, accounted for 56.5% of total variance in accordance with Factors 1, 2, and 3, Factor 4 was the contracting upper part of lower leg between legscye girth and midway thigh girth, Factor 5 comprised the total and upper segment of inner leg line and posterior knee girth, Factor 6 was the total crotch length, Factor 7 was the ankle girth, Factor 8 was the abdomen girth.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.235-244
• /
• 1997

The empirical factor and reaction force based on published data were involved to investigate compressible flows through sudden enlargement and sudden contraction passages. Analytical solutions of engineering interest were obtained from one-dimensional steady compressible gas dynamic equations. The effects of compressibility, cross-sectional area ratio, and inlet Mach number on the air flows were discussed with regards to the total pressure loss and flow choking. The present results provide available information necessary ta design the compressible pipe flow systems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.809-812
• /
• 1999

This research analyzed the factors for crack generation and proposed the recommended construction methods for the efficient crack control of underground RC box structures under the roadway. The selected main factors were: details of contraction joints, ratio of crack control rebars in longitudinla direction, and placement of flyash concrete. These factors were tested on the actual structures and the significance of each factor was analyzed, The results show that the flyash concrete placement and the inducting minor cracks in a certain direction by adopting contraction joints are practical and efficient methods to control cracks. The significance of crack generating factors increases as the sectional loss of contraction joint spacing increase. It was recommeded that the sectional loss should be higher than 20 percent to maximize the crack generating effects. It was not possible to verify the effect of crack control rebar spacing, but it was estimated that the ratio of crack control rebar should be increased to minimize cracks.

• Proceedings of the Korean Fiber Society Conference
• /
• 1988.06a
• /
• pp.35-37
• /
• 1988

This paper shows the possibility of the application of the orientation density function of fibers to the mechanics of fibrous assembly. As an example, the orientation density function of a single yarn was theoretically derived in consideration of the idealized helical yarn. And the theoretical derivation of the tensile modulus of the fibrous assembly was performed in view of the fiber orientation. Application of this orientation density function to the obtained tensile modulus and to the contraction factor of the yarn was also performed so that the theoretical equations of the tensile modulus and the contraction factor of the yarn were obtained. Close agreement was shown between the theoretical and the existing equations. Consequently it was confirmed that the application of the orientation density function to the mechanics of the fibrous assembly is sufficiently possible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.481-490
• /
• 2005

The aim of this study was to investigate the relationship between the C-factor and shrinkage strain values of composite resin and examine the strain values in different incremental filling techniques. The strain gauge method was used for measurement of polymerization shrinkge strain. Experiment was divided two step. In a first experiment, we compared with strain value in three different depth (2mm, 3mm, 4mm) and microhardness of each samples after 24hours were measured. In a second experiment, we examined the strain values in five different filling techniques(Group 1: bulk filling, Group 2: oblique incremental filling, Group 3: horizontal incremental filling, Group 4: vertical incremental filling, Group 5: lining of flowable resin and bulk filling) The results of the present study can be summarized as follows: 1. Composite resin in acrylic molds showed the initial expansion at the early phase of polymerization. 2. Contraction stress was not revealed significant difference between depth of 2mm and 3mm(P>0.05). 3. Contraction stress in sample of 4mm was showed the lowest value(P<0.05). 4. Microhardness of specimen was revealed more difference between upper and lower surface in depth of 4mm than 2 and 3mm(P<0.05). 5. Lining of flowable resin and bulk filling (Group 5) was showed the lowest contraction stress, Group 2 and 3 was showed the highest contraction stress(P<0.05). On the basis above results, the stress that result from the polymerization shrinkage, when incremental curing techniques are used, showed that there is no advantage in incremental placement and curing.

• The Korean Journal of Physiology
• /
• v.27 no.1
• /
• pp.27-35
• /
• 1993

Effects of the endothelium on the contractile responses to norepinephrine (NE) were investigated in isolated helical strips of the proximal and distal coronaries artery of pigs. The helical strips were immersed in Tris-buffered Tyrode's solution equilibrated with 100% $O_2$ at $35^{\circ}C$ and its isometric tension was measured. NE relaxed the strips precontracted with acetylcholine from both the proximal and distal coronary artery. NE-induced relaxation, which might be induced mainly by $\beta$-adrenoceptor function was dominant in the distal coronary arteries. NE-induced relaxation was converted to a contraction after $\beta$-adrenoceptor blockade with propranolol $(3{\times}10^{-6}M)$. ${\alpha}$-adrenoceptor-mediated contraction by NE was greater in the proximal coronary artery than the distal coronary artery. Quantitatively, ${\alpha}_1$-adrenoceptor mediated contraction by NE was greater than ${\alpha}_2$-adrenoceptor mediated contraction by NE in both arteries. NE-induced relaxation was decreased by rubbing of endothelium in both arteries. ${\alpha}_1-and\;{\alpha}_2$-adrenoceptor mediated contraction by NE were potentiated by rubbing of endothelium in both arteries. Pretreatment with methylene blue, an inhibitor of soluble guanylate cyclase, increased ${\alpha}_1-\;and\;{\alpha}_2$-adrenoceptor mediated contraction by NE in both arteries with endothelium. From the above results, we suggest that the effect of activation of $\alpha$-adrenoceptors by NE may be modulated by endothelium in the proximal and distal coronary arteries of pigs. This effect may be mediated via endothelium derived relaxing factor.

• Archives of Plastic Surgery
• /
• v.50 no.1
• /
• pp.106-115
• /
• 2023

Background Primary contraction of full-thickness graft has been traditionally quoted to be 40%. There are lacunae in literature to elaborate on the factors influencing it ever since. Methods About 75 subjects who underwent full-thickness grafting procedures to resurface small defects were included in the study. The initial and final graft dimensions after primary contraction were traced on X-ray templates and the percentage of contraction was evaluated using the graphical method. This was further correlated with age, collagen, elastic matrix metalloproteinases-1 (MMP-1) and -2 content along with dermal thickness of the skin specimen sent from the graft. Results The primary contraction of the graft had a very significant correlation only with the initial size of graft harvested with a linear regression of 33.3% and a Spearman's correlation of 0.587 significant at a p-value of 0.001. Conclusion This study though preliminary tries to highlight an important factor that primary contraction of grafts is a physical phenomenon independent of its contents like collagen, elastin, or MMP-1 and -2 or age and dependent on its initial size of harvest instead.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.576-584
• /
• 2011

Purpose: The shape and location, the amount of the wound and the characteristics of the remaining tissues are known to influence wound contraction. The previous studies using small animals have not been an appropriate model because the wound healing mechanisms and skin structures are different from those of the human. The purpose of this study is to evaluate wound contraction according to the shape and location of the wound using a $Micropig^{(R)}$. Methods: Four $Micropigs^{(R)}$ (Medikinetics, Pyeongtaek, Korea) that were 10 months of age weighed 25 kg were used. Full thickness skin defects were made by clearing all the tissues above the fascial layer in the shape of square, a regular triangle and a circle of 9 $cm^2$ each on the back around the spine. Eight wounds were created on the back of each pig, 50 mm apart from each other. The randomly chosen wound shapes included 11 squares, 11 regular triangles, and 10 circles. Wound dressing was done every other day with polyurethane foam. The wound size was measured using a Visitrak $Digital^{(R)}$ (Smith & Nephew, Hull, UK) on every other day after surgery from day 2 to day 28. A biopsy was performed on day 3, and 1, 2, 3 and 4 weeks to investigate the degree of acute and chronic inflammation, the number of microvesssel and myofibroblast density using H & E stain and immunohistochemistry. The wound contraction rate was calculated to figure out the differences among each of the shapes and the locations. Results: The ultimate shape of the circle wound was oval, and that of the regular triangle and square were stellate. The maximum contraction rate was obtained on 8 to 10 days for all the shapes, which corresponds with the immunohistochemical finding that myofibroblast increases in the earlier 2 weeks whereas it decreases in the later 2 weeks. Epithelialization was seen in the wound margin on day 7 and afterwards. The final wound contraction rates were highest for the regular triangle shapes; however, there were no statistically significant differences. The wound contraction rates by locations showed statistically significant differences. The wound in the cephalic area presented more contractions than that of the wounds in the caudal area. Conclusion: The location of a wound is more important factor than the wound shape in wound contraction.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.258-264
• /
• 2010

Most of fluid systems, such as P&ID in ships, power plants, and chemical plants, consist of various components. The components such as bends, tees, sudden-expansions, sudden-contractions, and orifices contribute to overall pressure loss of the system. The local pressure losses across such components are determined using a pressure loss coefficient, k-factor, in lumped parameter models. In many engineering problems Idelchik's k-factor models have been used to estimate them. The present work compares the k-factor based on CFD calculation against Idelchik's model in order to confirm whether a commercial CFD package can be used for pressure loss coefficient estimation of complex geometries. The results show that RSM is the best appropriate for evaluating pressure loss coefficient. Commercial CFD package can be used as a tool evaluating k-factor even though the accuracy is influenced by a turbulence model.