• 시스템엔지니어링학술지
• /
• 제20권1호
• /
• pp.76-84
• /
• 2024

This study investigates the design of an optical observation system for continuously tracking unknown space object targets within the telescope's field of view at a short cycle rate of several to tens of frames per second. Through modeling and integrated simulation by design variables, we aim to identify combinations that satisfy the performance effectiveness scale. The study demonstrates the effectiveness of a model-based simulation analysis approach in rapidly identifying design parameters that meet specific performance requirements. By leveraging numerical models tailored to the desired performance analysis level, the approach provides a robust foundation for decision-making, eliminating reliance on empirical methods or vague estimations.

• 유공압시스템학회논문집
• /
• 제4권1호
• /
• pp.18-24
• /
• 2007

The continuously variable transmission (CVT) of which speed ratio can change continuously in a fixed range has the benefits of low fuel consumption and exhaust gas because it enables the engine of a vehicle to operate in a high efficiency range regardless of vehicle speed. The speed ratio of belt type CVT is controlled by adjusting line pressure. The one of the line pressure control methods, mechanical-hydraulic control is usually adopting VDT's control method, in which the secondary solenoid valve has two functions both a regulator and a line pressure controller. However, this control method could not show the high performance of CVT with optimal driving capability because of the limitation of simple control algorithm, and it could not gain market share sufficiently in spite of the advantage of CVT with low fuel consumption. On the other hand, the electro-hydraulic control method gives the enhancement of power performance and low fuel consumption by implementing various driving mode using the proportional control or PWM control. The key of CVT technique is to develop a control algorithm of the electro-hydraulic solenoid valve in order to implement the speed ratio efficiently. In this paper, the line pressure control algorithm is proposed and the hydraulic system is controlled using metal belt type CVT test rig and the embedded ECU platform.

• Agribusiness and Information Management
• /
• 제11권2호
• /
• pp.16-24
• /
• 2019

BRIS has been established by the Ministry of Agriculture, Food and Rural Affairs since 2011 under Article 21 of the Act on the Preservation, Management and Utilization of Agricultural Life Resources. It is an information service that provides information related to agricultural life resources in connection with the Rural Development Administration, the Forest Service, and Korea Seed & Variety Service, Agricultural Resources and Agricultural and Livestock Quarantine Headquarters. The purpose of this study is to evaluate how the users assess the information system quality (information quality, system quality) for the current Bio Resource Information Service (BRIS). Ultimately, the structural equation modeling analyzes the causal relationship between each variable and how it responds to the user's continuous use intention. As a result, information quality among information system quality and information quality among system quality used as the main variables for the evaluation of BRIS were statistically positively influenced by users' perceived usefulness, while system quality It has been analyzed to have a positive effect on the sustained use intention. The user's continuous use intention is positively influenced by the information system quality and perceived usefulness at a statistically significant level. Especially, the perceived usefulness plays a role in mediating the user's continuous use intention.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.89-96
• /
• 2000

Evolutionary operation (EVOP) is a continuous improvement system which explores a region of process operating conditions by deliberately creating some systematic changes to the process variable levels without jeopardizing the product. It is aimed at securing a satisfactory operating condition in full-scale manufacturing processes, which is generally different from that obtained in laboratory or pilot plant experiments. Information on how to improve the process is generated from a simple experimental design. Traditional EVOP procedures are established on the assumption that the variance of the response variable should be small and stable in the region of the process operation. However, it is often the case that process noises have an influence on the stability of the process. This process instability is due to many factors such as raw materials, ambient temperature, and equipment wear. Therefore, process variables should be optimized continuously not only to meet the target value but also to keep the variance of the response variables as low as possible. We propose a scheme to achieve robust process improvement. As a process performance measure, we adopted the mean square error (MSE) of the replicate response values on a specific operating condition, and used the Kruskal-Wallis test to identify significant differences between the process operating conditions.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.407-418
• /
• 2004

There are several different types of continuously variable transmission(CVT) such as toroidal drive, belt drive, hydrostatic drive, hydro-mechanical drive. The toroidal CVT is an alternative to the manual transmission, HST, power-shift gear trans-missions or other CVTs. The driver of the CVT tractor doesn't have to operate a shia lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. The fuel efficiency of CVT tractor can be increased since the controller responds quickly to the change in external load on the wheel during field operation. This study was conducted to develop the hardwares and softwares for the toroidal CVT controller which control the variator and the range clutches. The hardware consisted of a measurement system, hydraulic system and computer. And the PID controller was developed using the simulation model of the CVT control system. Through the simulation, the control coefficients for the PID controller were selected. Finally, the performance of the CVT control system was evaluated by step response test and torque response test. The settling time of the CVT control system appeared to be fast enough for field operations.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.206-214
• /
• 2022

Automobile manufacturers in each country are spurring the development of electric vehicles that use electric energy, an eco-friendly energy, as a futuristic vehicle. Electric vehicles have the advantage of no harmful gas or environmental pollution and low noise. Unlike automobiles using existing internal combustion engines using fossil fuels, electric vehicles use the electricity of batteries to cause rotational motion of motors. In the electric vehicle driven by the motor, it is indispensable to develop a controller for controlling the motor. One of the areas where automobile manufacturers are concentrating is the development of small electric vehicles as a personal transportation means. Small electric vehicles such as electric motorcycles, one-seat electric vehicles and two-seat electric vehicles are expanding the market as a means of operating throughout the city. In the domestic road conditions with many hills, it is effective to have a separate transmission system for small electric vehicles to drive smoothly. In this study, we propose a new type of continuously variable transmission(CVT) system to ensure that small electric vehicles can be driven smoothly in hilly domestic terrain. The proposed CVT system is equipped with a basic disk and a rotational disk in the driving pulley and the driven pulley, respectively, and is applied with a sloping spline to rotate the rotational disk. To commercialize the proposed CVT system, an experimental device was developed to examine the power transmission efficiency and the configuration of the CVT system was proposed.

• Journal of Biosystems Engineering
• /
• 제29권5호
• /
• pp.395-406
• /
• 2004

Most of tractors in the world have manual gear transmission, and some of small tractors have hydrostatic trans-mission(HST). Since the HST is expensive and has low power efficiency, it is being used for only small garden tractors. The continuously variable transmission(CVT) is an alternative to the HST or power-shift gear transmissions. The driver of the CVT tractor doesn't have to operate a shift lever since the CVT controller automatically controls the speed of tractor. Thus, it is much easier to operate the CVT tractor. For the easy and stable control of the CVT tractor, an appropriate control algorithm should be developed and the dynamic modeling should be carried out before making the prototype of CVT controller. This study was conducted to develop a simulation model of the CVT control system needed to develop a PID control algorithm. The simulation model consisted of variator dynamics, hydraulic system and control computer. And the simulation model was verified by experiment. The results obtained in this study can be utilized in the design of CVT tractors for practical use, but a lot of field tests and improvement of softwares would be necessary.

• 가정∙방문간호학회지
• /
• 제29권1호
• /
• pp.70-81
• /
• 2022

Purpose: This study was performed to explore the trend of nursing research in the Korean long-term care system. Methods: Articles published between 2008 and 2021 were searched using the terms "long-term care system" and "nursing." Ninety-one articles were analyzed and classified into five categories according to research methods. Data were extracted through a systematic review process and underwent descriptive statistics and content analyses. Results: The most analyzed variable in the survey studies was job satisfaction. Many variables were classified into input and output factors using Donabedian's model. The content analysis showed that most suggestions were about improving the political regulation system. Conclusion: It is necessary to establish a research foundation to provide research funding and support to cultivate future nursing research in long-term care. Systematic improvement of research in nursing should be continuously pursued to revitalize nursing services, expand nursing service interventions, and improve management competency programs in nursing institutions.

• 오토저널
• /
• 제18권3호
• /
• pp.8-16
• /
• 1996

차량의 주행저항에 대응하여 최소-최대변속비 사이를 연속적으로 무한대의 단계로 변속시킴으로써 우수한 동력성능과 연비를 얻을 수 있다는 장점을 지닌 무단변속기의 벨트-풀리 시스템에 대하여, 현재 개발에 성공한 벨트-풀리 시스템의 특징을 분석하고, 벨트 효율 및 적용한계를 조사분석한 결과, 내구성 및 소음측면에서 볼 때 금속푸시벨트가 가장 유리하며, 벨트의 동력손실을 최소화하기 위하여 금속푸시벨트의 구성부품인 블록과 링을 최적화하고, 풀리에 작용하는 축력을 최적으로 제어함으로서 전달효율이 향상된 벨트-풀리 시스템을 제공할 수 있다. 날로 엄격해지는 배기가스 규제와 전자 및 제어분야의 발달로 성능이 더욱 향상된 무단변속기의 개발 및 장착이 환산될 것으로 예상되며, 또한 효율, 소음측면 뿐만 아니라, 제작단가가 저렴한 CVT용 벨트의 개발이 잇따를 것으로 전망된다.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.255-264
• /
• 2002

In this paper, the power transmitting mechanism for negative torque of the metal V-belt (MVB) CVT were investigated by theoretically analyzing variation of band tension, block compression forces for each of the primary and secondary pulleys. An experimental study was performed to investigate the speed ratio - thrust characteristics for negative torque. The experimental results are in good acoordance with the theoretical results. CVT line pressure control logic was suggested for negative torque based the speed radio - negative torque - thrust characteristics and the thrust ratio curves. The results of this study can be used as basic design materials for developing the CVT control system for negative torque.