• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1645-1652
• /
• 2005

Pick-and-place systems using suction cups have been being widely used and continuously developed in production automation. There are, however, some drawbacks in constructing such systems. One of them is that it generates high level noise due to air compressors. And the system must have complex constitutions of mechanical component such as air compressors, air tubes, air valves, etc. Moreover, it needs continuous air supply to maintain vacuum in suction cups. If there is a failure in any suction cup, the total suction system may fail owing to air leakage. To overcome these drawbacks, we propose PMS (Permanent Magnet Suction) mechanism which has permanent magnets for vacuuming suction cups with no air compressor. The basic concept of PMS mechanism is to rotate permanent magnets with fixed angle. Simple rotation of permanent magnets changes the direction of the magnetic force applied at the suction cups. Since each suction cup has no direct connection with any of the others, the air leakage at one suction cup is not critical. The proposed suction mechanism was designed and fabricated. With some experiments, the feasibility and performance of the PMS mechanism was shown. The strong points of the PMS mechanism are in its simple structure, generating low noise, high energy efficiency, and no need of continuous energy supply.

• Tuberculosis and Respiratory Diseases
• /
• 제61권2호
• /
• pp.178-183
• /
• 2006

61세 만성폐쇄폐질환 남자 환자로 호흡곤란을 주소로 내원하여 만성폐쇄성폐 질환 급성 악화 진단 하에 입원치료를 시작하였다. 입원치료 도중 다량의 자발성 피하공기증이 생기면서 호흡곤란이 악화되어 다수의 16 gauge 정맥용 도관 을 빗장중간선에 삽입하고 배출을 시도하였다. 그러나 피하공기증이 더욱 악화되어 wall suction으로 지속적인 흡인을 하였고 이후 피하공기증의 관해를 확인 할 수 있었다. 저자들은 16 gauge 정맥용 도관을 이용한 지속흡인으로 비침습 적이고 간편하게 피하공기증을 치료하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.115-119
• /
• 2004

The effect of a continuous blowing or suction on an oscillating 2-D NACA0012 airfoil was investigated numerically for the dynamic stall control. The influence of control parameter variation was also studied in the view point of aerodynamic characteristics. The result showed that the blowing control kept a higher lift drag ratio before stall angle but the dynamic stall angle was not exceed to without control result. As the slot position was closer to leading edge, the positive control effect becomes greater. The stronger jet and the smaller jet angel made more favorable roles on the control performance. In the cases of the suction, the overall control features were similar to those of the blowing, but dynamic stall angle was increased, i.e. suction was more effective to control dynamic stall. It was also founded that the suction control was showed better control effect as the slot position moves to trail edge within thirty percentage of chord length. In the simulation for the jet strength and the jet angle control, the same tendencies were observed to those of blowing cases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.962-966
• /
• 2004

Suction transfer system with air suctioning is widely used and continuously developed in production automation. Air suctioning has some drawbacks in use. To generate vacuum in the suction cup with air suctioning, complex of mechanical component like as air compressor, air tube, air value is need, and it needs continuous air supply. And if the failure of the suction in a cup in the multi-suction cup system which is generally used occurs then the suctions of all of the cup will be fail. To overcome these drawbacks, new suction mechanism which uses permanent magnet for the movement of the suction cup is proposed. The proposed mechanism activates each suction cup separately, so the air leakage of a cup is not critical. The proposed suction system wasdesigned and fabricated in real world. With some experiments, the usability and performance of the suction mechanism was proved. The strong points of the proposed suction mechanism are simple structure, high energy efficiency, and discrete energy supply.

• Archives of Plastic Surgery
• /
• 제50권1호
• /
• pp.96-100
• /
• 2023

The microsurgical anastomosis is integral to the success of autologous-free tissue transfer. Successful performance of this procedure relies strongly on operator dexterity, which can be made more challenging when blood and edematous fluids obscure the field of view. Workflow is impeded by intermittent irrigation and suctioning, necessitating presence of an assistant, with risk of arterial thrombosis, from vessels being drawn into suction drains. To negate these current disadvantages and minimize the barrier of entry to microvascular operations, we designed, manufactured, and patented a novel three-dimensional printed microsurgical background device with microfluidic capabilities that allow continuous suction and irrigation as well as provide platforms that enable multiangle retraction to facilitate operator autonomy. This was validated in an ex vivo model, with the device found to be superior to the current standard. We believe that this will have major applicability to the improvement of microsurgeon

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.777-783
• /
• 2000

Composting by negative aeration is a reasonable proposition to control odor generated during composting process. Cattle manure and rice hulls mixtures were composted in a bin composting system by negative aeration. Continuous(CA) and intermittent(IA) aeration methods were applied to analyze the composting characteristics. The composting temperature and the ammonia emission during composting were investigated according to the aeration methods. The main problem for the negative aeration was the generation of condensate in the suction line of blower. The quantity of condensate was significant for continuous aeration. The aeration method should be modified to escape from the cooling effect of continuous aeration at the initial stage of composting. It took a longer time to finish a composting for intermittent aeration on account of lower aeration. It was concluded that the composting by negative aeration could be accomplished by either continuous or intermittent aeration method if the flow rate would be controlled more efficiently and the water vapor in suction line of blower could be removed effectively. Ammonia emission increased up to maximum value of 675ppm for continuous aeration while 300ppm for intermittent aeration. However, the cumulative value of ammonia emission was larger for intermittent aeration than for continuous aeration.

• Archives of Plastic Surgery
• /
• 제45권5호
• /
• pp.449-457
• /
• 2018

Background Although previous studies have focused on determining prognostic and causative variables associated with fistula-related complications after head and neck reconstructive surgery, only a few studies have addressed preventive measures. Noting that pooled saliva complicates wound healing and precipitates fistula-related complications, we devised a continuous suction system to remove saliva during early postoperative recovery. Methods A continuous suction system was implemented in 20 patients after head and neck reconstructive surgery between January 2012 and October 2017. This group was compared to a control group of 16 patients at the same institution. The system was placed orally when the lesion was on the anterior side of the retromolar trigone area, and when glossectomy or resection of the mouth floor was performed. When the orohypopharynx and/or larynx were eradicated, the irrigation system was placed in the pharyngeal area. Results The mean follow-up period was $9.2{\pm}2.4$ months. The Hemovac system was applied for an average of 7.5 days. On average, 6.5 days were needed for the net drain output to fall below 10 mL. Complications were analyzed according to their causes and rates. A fistula occurred in two cases in the suction group. Compared to the control group, a significant difference was noted in the surgical site infection rate (P<0.031). Conclusions Clinical observations showed reduced saliva pooling and a reduction in the infection rate. This resulted in improved wound healing through the application of a continuous suction system.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.371-372
• /
• 2018

• 산업기술연구
• /
• 제30권B호
• /
• pp.3-10
• /
• 2010

The numerical study was conducted using the equation of Vanapalli et al.(1996) related shear strength of unsaturated soils. Angle of shearing resistance(${\Phi}^b$) and angle of internal friction(${\Phi}^{\prime}$) appear identically in lower suction range, but angle of shearing resistance(${\Phi}^b$) has non-linearity as suction increases. Nevertheless, the numerical study was conducted using angle of shearing resistance(${\Phi}^b$) in even lower suction range because of limit of program function. However, behavior of real ground on applying numerical study can be analysed wrong by it. Therefore in this paper numerical analysis on applying the equation of Vanapalli et al.(1996) and ${\Phi}^b$ has been compared about unsaturated slope considering continuous rainfall.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.8-13
• /
• 2003

Soil, ground water, and sea bed are exposed to a continuous accumulation of polluted materials, causing serious environmental damage. It has been reported that such pollution causes a massive mortality of fish stock in rivers due to the resuspension of toxic chemicals, occurring during strong wind conditions. Therefore, it becomes apparent that there is an immediate demand for the restoration treatment of polluted river bed (or sea bed) sediment layers. Pollution levels of major rivers and ports, such as Paldang, Kyungan rivers, and Masan port, are becoming of great public concern, and are posing a serious environmental threat. In particular, the pollution of the Shi-hwa river has become a nation wide issue for the last few years. In spite of such public concern, the pollution levels of such rivers or ports are worsening everyday. In this study, an environmentally sound engineering package is introduced that helps to restore the polluted river bed or sea bed sediments. This engineering package consists of a suction facility, followed by a series of mechanical, chemical, and biological treatment units. The suction facility is designed to minimize secondary pollution that occurs from the resuspension of toxic materials during suction. The sea bed cleaning engineering package is designed to be installed on the top of a floating barge. Such a combination of environmental plant and shipbuilding technology provides a cost-effective solution, minimizing the transportation between suction and treatment facilities.