• Clean Technology
• /
• v.23 no.4
• /
• pp.345-356
• /
• 2017

The composting is a biological process that converts organic matter into useful resources such as fertilizers. It is a continuous transition of microbial communities to adapt changes in organic matter and environmental conditions (carbonation rate, temperature, humidity, oxygen supply, pH, etc.). Most of the composting plants are located in the proximity of the residential areas. It is a general scenario where government authorities receive complaints from the local residents due to release of odor from the composting, and has become a social problem in Korea. Identification of dominant microorganisms, understanding change in microbial communities and augmentation of specific microorganism for composting is vital to enhance the efficiency of composting, quality of the compost produced, and reduction of odor. In this paper, we suggest the optimum operation conditions and methods for compost depot to reduce odor generation. The selection of the appropriate microorganisms and their rapid increase in population are effective to promote composting. The optimal growth conditions of bacteria such as aeration (oxygen), temperature, and humidity were standardized to maximize composting through microbial degradation. The use of porous minerals and moisture control has significantly improved odor removal. Recent technologies to reduce odor from the composting environment and improved composting processes are also presented.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.21-28
• /
• 2012

The objective of this study is to evaluate the prediction accuracy of FDS(Fire Dynamic Simulator) for the thermal and chemical characteristics of under-ventilated fire with unsteady fire growth in a semi-closed compartment. To this end, a standard doorway width of the full-scale ISO 9705 room was modified to 0.1 m and the flow rate of heptane fuel was increased linearly with time (until maximum 2.0 MW based on ideal heat release rate) using a spray nozzle located at the center of enclosure. To verify the capability of FDS, the predicted results were compared with a previous experimental data under the identical fire conditions. It was observed that with an appropriate grid system, the numerically predicted temperature and heat flux inside the compartment showed reasonable agreement with the experimental data. On the other hand, there were considerable limitations to predict accurately the unsteady behaviors of CO and $CO_2$ concentration under the condition of continuous fire growth. These results leaded to a discrepancy between the present evaluation of FDS and the previous evaluation conducted for steady-state under-ventilated fires. It was important to note that the prediction of transient CO production characteristics using FDS was approached carefully for the under-ventilated fire in a semi-closed compartment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.428-435
• /
• 1997

For the purpose of investigating the continuous fluoride releasing from acrylic resin using removable appliances by incorporating fluoride into polymethylmethacrylate during the construction of the appliances, two kinds of fluoride were blended with acrylic powder and devided into five groups as follows. Group 1 : no fluoride (control) Group 2 : NaF 5 wt% Group 3 : NaF 10 wt% Group 4 : $CaF_2$ 5 wt% Group 5 : $CaF_2$ 10 wt% Resin specimens were tested in vitro for fluoride release with fluoride electrode and flexural strength with Instron. The results were as follows ; 1. After 24 hrs, released fluoride concentration(ppm) was the most in group 3($126.5{\pm}14.15$) then, next, group 2($49.5{\pm}4.92$), group 5($2.67{\pm}1.08$), group 4($0.81{\pm}0.30$), group 1($0.03{\pm}0.01$) in order, but after 28 days, group 3($3.37{\pm}0.31$), group 5($1.25{\pm}0.25$), group 4($0.74{\pm}0.19$), group 2($0.68{\pm}0.07$), group 1($0.03{\pm}0.01$). 2. Fluoride releasing of NaF groups were faster and more amount than $CaF_2$ groups initially but decreased significantly, later. 3. Flexural strength ($kg/cm^2$) was the biggest in group 1($602.90{\pm}69.32$), and then group 4($568.98{\pm}20.16$), group 5($556.19{\pm}5.26$), group 2($536.12{\pm}30.35$), group 3($508.44{\pm}26.16$) in order, the differences between control group and NaF groups were statistically significant (p<0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.8-14
• /
• 2000

Long term cultivation crops like tomato, capsicum, melon etc. demand much amount of continuous supplying of nutrition during the whole growing periods. It is not easy to cover satisfactorily the nutritional demands for them by splitted top dressings, slow release fertilizer applications and fertigation systems. To overcome these problems, the "CULTAN" (Controlled Uptake Long Term Ammonium Nutrition) Beaker Deposit techniques have been developed and it was put into PVC beaker with the combined nitrogen fertilizer type mixed with the ratio of one-third of ammonium sulfate-N and two-thirds of urea-N, in which nitrogen was loaded on the demanding amount of a tomato plant during the growing period. Gypsum was mixed as a binder, and loamy soil and compost were used as a diffusion regulator. It was placed upside down into root zone of tomato at the transplanting. Tomato roots were spreaded into the Deposit beaker by ammonium ions which attract root growth. The tomato fruit yield and nitrogen uptake by plant were increased by application of $NH_4$-Beaker deposit fertilizer rather than those of common fertilizer treatment. In conclusion, it was able to improve economic and ecological benefits through CULTAN system compared with common fertilization systems. CULTAN system was estimated as a prospective alternative to enhance productivity and minimize nutrient lose. In addition, it shows further developing possibility of CULTAN system by the supplement of micro-nutrients and pesticides in the macro-nutrient beaker deposits.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.35-44
• /
• 2019

Purpose - This study focuses on the continuance intention of O2O fresh agricultural products e-commerce. By literature review, this paper looks through the classical theories which are often applied to study use behavior and continuance intention on the electronic commerce area. Ultimately based on the expectancy theory, Technology acceptance model, success model as well as trust model, a model of the continuance intention of fresh products O2O electronic commerce application is established. Research design, data, and methodology - Among users Chinese consumers have been chosen who have use experience as the research objects. From October 2, 2018 to November 2, 2018, 685 questionnaires in total were collected by the online release and collection. Expect for the negative questionnaires, the remaining 650 pieces of data are statistically analyzed. The collected data were firstly be analyzed by SPSS Ver. 25 on its frequency, reliability and exploratory factors. Then AMOS Ver. 25 is applied to the Confirmatory Factor Analysis, Discriminant Validity and hypothesis testing of the Structural Equation Modeling. Finally, the following research conclusions could be obtained from the hypothesis testing. Results - Firstly, in the extended IS model, quality factor for hypothesis testing, service quality, information quality and delivery quality have obviously present positive influences on satisfaction respectively. Secondly, in the hypothesis testing part of ECM-ISC model and UTAUT model, all hypotheses have presented accepted results. Especially from expectation confirmation to usefulness perception, the influence factor achieves 12.603, In the hypothesis of continuance intention, the influence factor of social influence on continuance intention is 7.748 and also it is the most remarkable one. Conclusions - The results show that the service quality of O2O fresh agricultural products e-commerce has the greatest impact on satisfaction, while the perceived usefulness of consumers has the most significant impact on O2O fresh agricultural products for sustainable use intention. This thesis makes up for the blank of O2O fresh food e-commerce for sustainable use intentions, and provides a theoretical basis for consumers' sustainable use behavior, and practical enlightenment for the sustainable development of O2O fresh agricultural products e-commerce.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.707-719
• /
• 2021

The purpose of this study was to find out how effect does the second-stage which is the intensive course program for sexual offenders of three-stage(basic, intensive and advanced remedial) on impulsivity, anger expression, rape myth and self-esteem of sexual offenders. To this end, 10 people waiting for the second-stage intensive education among sexual violence offenders serving at M prison located in J province were selected as subjects for the study. To verify the effectiveness of the program, repeated measurement design(pre, post and one month post test) was conducted, and a total of 200 hours of 'Intensive Course Program on the Sexual Violence' was conducted to the subjects. The results of this study are as follows. It was confirmed that the intensive course program on the sexual violence for the re-crime risky group in the sex offender is effective in reducing impulsivity and anger expression, which are risk factors of sexual crime, bringing positive changes to rape myths, which are distorted sexual perceptions of sexual violence criminals, and improving self-esteem. Finally, it suggested the necessity of continuous development and improvement of sexual violence preventive programs targeting sexual offenders, and construction of systematic supervision and related system to ensure the effectiveness of remedial after release of sexual offenders.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.27-37
• /
• 2022

With the recent increase in the spread of ESS (Electric Storage System), the damage to human life and property is also rapidly increasing due to continuous fires caused by ESS. In the manufacture of urethane sandwich panels used in ESS, it is necessary to improve the flame retardant performance. In this study, in order to realize the flame retardant properties of flexible polyurethane foam, the effect of the tissue density of the product due to the change of the isocyanate functional group parameter that changes the physical properties of the product on the fire performance was studied. The product was manufactured by changing the density of the urethane structure, and combustion performance tests, gas toxicity tests, and smoke density tests were performed. As a result, it was confirmed that the total amount of heat released had excellent performance when the isocyanate functional group was high, and had no correlation with the maximum heat release rate. When the value of the isocyanate functional group was 2.7 or more, the collapse of the shape could be prevented. In the gas hazard test, the performance was increased when the isocyanate functional group was relatively high, so a flame retardant for the Char system, which had a dense structure and easy to form a carbonized film, was added. confirmed to be. Therefore, as a result of this study, it is thought that it will be possible to lay the foundation for the development of a flame retardant to replace the cheap urethane sandwich panel used in the past.

• Asia pacific journal of information systems
• /
• v.24 no.3
• /
• pp.299-323
• /
• 2014

The reason location based service is drawing attention recently is because smart phones are being supplied increasingly. Smart phone, basically equipped with GPS that can identify location information, has the advantage that it can provide contents and services suitable for the user by identifying user location accurately. Offering such diverse advantages, location based services are increasingly used. In addition, for use of location based services, release of user's personal information and location data is essentially required. Regarding personal information and location data, in addition to IT companies, general companies also are conducting various profitable businesses and sales activities based on personal information, and in particular, personal location data, comprehending high value of use among personal information, are drawing high attentions. Increase in demand of personal information is raising the risk of personal information infringement, and infringements of personal location data also are increasing in frequency and degree. Therefore, infringements of personal information should be minimized through user's action and efforts to reinforce security along with Act on the Protection of Personal Information and Act on the Protection of Location Information. This study aimed to improve the importance of personal information privacy by empirically analyzing the effect of perceived values on the intention to strengthen location information security and continuously use location information for users who received location-based services (LBS) in mobile environments with the privacy calculation model of benefits and risks as a theoretical background. This study regarded situation-based provision, the benefit which users perceived while using location-based services, and the risk related to personal location information, a risk which occurs while using services, as independent variables and investigated the perceived values of the two variables. It also examined whether there were efforts to reduce risks related to personal location information according to the values of location- based services, which consumers perceived through the intention to strengthen security. Furthermore, it presented a study model which intended to investigate the effect of perceived values and intention of strengthening security on the continuous use of location-based services. A survey was conducted for three hundred ten users who had received location-based services via their smartphones to verify study hypotheses. Three hundred four questionnaires except problematic ones were collected. The hypotheses were verified, using a statistical method and a logical basis was presented. An empirical analysis was made on the data collected through the survey with SPSS 12.0 and SmartPLS 2.0 to verify respondents' demographic characteristics, an exploratory factor analysis and the appropriateness of the study model. As a result, it was shown that the users who had received location-based services were significantly influenced by the perceived value of their benefits, but risk related to location information did not have an effect on consumers' perceived values. Even though users perceived the risk related to personal location information while using services, it was viewed that users' perceived value had nothing to do with the use of location-based services. However, it was shown that users significantly responded to the intention of strengthening security in relation to location information risks and tended to use services continuously, strengthening positive efforts for security when their perceived values were high.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.350-363
• /
• 2009

Inter- and intra-specific differences in removal activities, filtering rates (FR) and production of feces-and pseudo-feces (PF) between a native freshwater bivalve in Korea, Anodonta woodiana Lea and Unio douglasiae Griffith et Pidgeon, were compared using a continuous removal of organic matters (CROM) system. The CROM system comprised five steps; input of polluted water, control of water flow, mussel treatment, analysis of water quality and discharge of clean water. The study was designed to compare the removal activity of organic matters between A. woodiana and U. douglasiae, and the intra-specific differences between density and length in A. woordiana. Results clearly indicate that two kinds of mussels had obvious removal activities of seston in the eutrophic reservoir. First, if both are similar in shell length, there were no significant inter-specific differences in removal activity between A. woordiana and U. douglasiae (P>0.5), but FRs of U. douglasiae was relatively high due to low ash-fee dry weight. Second, if both are same in animal density, the smaller mussels (1$\sim$2 years old) showed a higher filtering rate and production of feces- and pseudo-feces and less release of ammonium than the larger mussels. Third, if both are same in biomass, FRs and PF of mussels were higher in the low-density tank than the high-density tank, While the Concentration of $NH_4$-N and $PO_4$-P released WRS similar to each other (P>0.5). Therefore, these results suggest that CROM system using a young bivalve A. woordiana can be applied to control the nuisance seston in eutrophic lake system, if a relevant species and density were selected. Additional pilot tests to optimize the age and density of domestic bivalves were needed for the generalization of CROM operation.