• 한국축산시설환경학회지
• /
• 제20권3호
• /
• pp.105-116
• /
• 2014

In this study, we developed a fermented TMR producing system which could a continuous operation of baling and wrapping the mixed TMR. The baling part has fixed chamber of dia. 900 mm and width 900 mm. And the the turn-table type wrapping part is very compact compared to conventional one in market. The test result were: The absorbed power of the prototype in working was 9.0~15.7 kW. The combined baling and wrapping performance was over 20 bales/hr. The leakage in the process was around 1.9 kg for making a 350 kg TMR bale. The diameter of wrapped TMR bale was 900~950 mm, and its weight was 350 kg in average. Therefore the density was $718kg/m^3$, and it was very high density to the inputted TMR. The pH of the fermented TMR was 5.0~5.6 which was similar to the fermented haylage, also the TMR had no butyric acid's odor.

• Smart Structures and Systems
• /
• 제16권3호
• /
• pp.521-535
• /
• 2015

Vibration-based monitoring is one approach used to perform structural condition assessment. By measuring structural response, such as displacement, dynamic characteristics of a structure may be estimated. Often, the primary dynamic responses in civil structures are below 5 Hz, making accurate low frequency measurement critical for successful dynamic characterization. In addition, static deflection measurements are useful for structural capacity and load rating assessments. This paper presents a DC coupled continuous wave radar to accurately detect both dynamic and static displacement. This low-cost radar sensor provides displacement measurements within a compact, wireless unit appropriate for a range of structural monitoring applications. The hardware components and operating mechanism of the radar are introduced and a series of laboratory experiments are presented to assess the performance characteristics of the radar. The laboratory and field experiments investigate the effect of factors such as target distance, motion amplitude, and motion frequency on the radar's measurement accuracy. The results demonstrate that the radar is capable of both static and dynamic displacement measurements with sub-millimeter accuracy, making it a promising technology for structural health monitoring.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.241-248
• /
• 2013

Importance-Performance Analysis(IPA) is a well-known methodology to find the area for improvement. However, the IPA uses different strategies depending on an attribute falls in either 'Concentrate', 'Keep up', 'Possible overkill', or Low priority' quadrant. Problems can occur when attributes locate near the demarcation lines. To solve this problem of IPA, I suggest a modified importance-satisfaction analysis which integrates the Slack(1994)'s diagonal approach and Kano's ASC(Jang et al., 2012) into Yang(2003)'s Importance-Satisfaction model. For this, I investigated 21 smartphone's quality attributes, which adopted from Song and Park(2012)'s study, and conducted a survey of 280 university students for the results of Kano' model and the importance and satisfaction of the quality attributes. The results show that the proposed model enables the business managers to prioritize the quality attributes for improvement through the interpretation on the continuous diagonal line using the Kano's questionnaire only, without acquiring any additional survey for importance of attributes. Accordingly, it is expected that the newly proposed method will diminish the limitation of the existing IPA. In addition, to test the validity of the ASC, this study conducts a comparative analysis between the Kano's ASC and Tontini(2007)'s method to determine the relative importance of quality attributes.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.109-113
• /
• 2002

Steel industry is the most capital intensive and the largest energy consuming industry, which operate huge and complex facilities to supply various steel products as the primary materials to almost every manufacturing industry Major steel products are hot-rolled and cold-rolled coils, plates, and wires that are produced through molten iron making, molten steel making, casting, and rolling. Each process runs in batch between setups and the specifications or bach are different with each other High energy consuming and heavy material handling require careful synchronization or processes, as well. Considering the synchronization or processes, the lot planning and scheduling problem in the integrated steelmaking process rovers the roll grouping with given casts. the sequencing or rolls over time, and the machine assignment and time scheduling or charges and casts. The problem is investigated by dividing it into two cases whether single or parallel machines at the molten steel making and the continuous casting processes. Problem descriptions and solution approaches or each instance are introduced. To test their performance and conformity, implementation or the algorithms and numerical experiments are carried out with real world and constructed data sets.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.349-354
• /
• 2010

Moving pixel displacement detection algorithm using correlation functions for making panorama image on the continuous images is presented in this paper. The input images get from a CMOS image sensor (CIS). The camera is maintained by constant brightness and uniform sensing area in test input pattern. For simple navigation and capture image has to 70% overlapped region. A correlation rate in two image data is evaluated by using reference image with first captures, and compare image with next captures. The displacement of the two images are expressed to second order function of x, y and solved with finding the coefficient in second order function. That results in the change in the peak correlation displacement from the reference to the compare image, is moving to pixel length. The navigating error is reduced by varying the path because the error is shown in the difference of the positioning vector between the true pixel position and the navigated pixel position. The algorithm performance is evaluated to be different from the error vector to vary the navigating path grid.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.723-726
• /
• 2005

The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.335-341
• /
• 2011

In this paper, we proposed an automatic packing mechanism of one station concept for fastener objects where the continuous work is performed in a finite space. The proposed packing mechanism is composed of supporting frame, feeding supply, air shower device, clamping/opening device, batch charging device, sealing/cutting device and supply adjusting device. And, these mechanisms have been modularized through mechanical, dynamical, structural and fluid optimized design using the SMO(SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The packing process is consisted performed in the order of feeding, clamping, bottom sealing, cutting, opening, object charging, closing and the upper sealing. And the time of these cycles were designed to be completed in 15-20 seconds. This packing mechanism will be created as a prototype in the near future. In addition, it will be applied to the production scenes after going through a field test for the validation of performance.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.470-477
• /
• 2010

The IGCC (Integrated gasification combined cycle) is known for one of the highest efficiency and the lowest emitting coal fueled power generating technologies. As the core technology of this system is the gasifier to make the efficiency and the continuous operation time increase, the research about different coal's gasification has been conducted. Our research group had set-up the coal gasifier for the pilot test to study the effect of different coals-Shenhua and Adaro coal- on gasification characteristics. Gasification conditions like temperature and pressure were controlled at a fixed condition and coal feed rate was also controlled 30 kg/h to retain the constant experimental condition. Through this study we found effects of coal composition and $O_2$/coal ratio on the cold gas efficiency, carbon conversion rate. The compounds of coal like carbon and ash make the performance of gasifier change. And carbon conversion rate was decreased with reduced $O_2$/coal ratio. The optical $O_2$/coal ratio is 0.8 for the highest cold gas efficiency approximately. At those operating conditions, the higher coal has the C/H ratio, the lower syn-gas has the $H_2$/CO ratio.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권3호
• /
• pp.125-132
• /
• 2012

마이크로그리드(microgrid)의 독립적 운용방식(islanded operation mode)에서는 전력 공급량과 전력 수요량 사이의 균형을 맞추기 위하여 부하차단(load shedding) 기법이 사용된다. 기존의 부하차단 기법들은 부하의 요구량이 연속적인 값의 범위를 갖는다고 가정하였다. 그러나 일부 부하는 이산적인 정수 값을 사용하여 자신의 요구량을 나타낸다. 따라서 본 논문에서는 독립형 운용방식 환경에서 부하 요구량의 이산적인 특성을 고려한 부하차단 기법을 다중 에이전트 시스템을 이용하여 설계한다. 또한 시스템 구조, 에이전트 기능, 그리고 에이전트 간 통신 프로토콜을 추가로 정의 및 확장함으로써 시스템을 구현하였으며, 구현된 시스템을 기반으로 다양한 시나리오 환경에서의 실험을 통하여 그 성능을 증명하였다.

• 대한공간정보학회지
• /
• 제12권1호
• /
• pp.55-62
• /
• 2004

최근 들어 높은 정밀도를 요하는 여러 GPS 응용분야에서 표준 RTK 기법의 적용거리 제한의 극복 방안으로 다수의 GPS 상시관측소를 활용한 RTK 기법(VRS ; 가상기준점방식)이 세계적으로 주목받고 있다. 이동국의 측위 정밀도는 가상기준점의 정밀도와 긴밀한 연관관계가 있다. 본 연구에서는 사후처리방식으로 시험망에서 가상점의 측위정확도와 기준점으로서의 기능을 고찰하는데 목적을 두고 후처리 방식으로 시험망 영역 내외에 가상 기준점을 생성한 후, 기존의 GPS 기준점을 고정시켜 해석한 결과와 가상점 생성 시의 실제좌표를 비교 고찰하였다. 연구결과. 사후처리 VRS 방식으로 시험망에서 생성한 가상점의 정확도를 확인할 수 있었다.