• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.15-24
• /
• 2011

Modern enterprises should concentrate their efforts on continuous improvements in focusing their development in the core areas of business and to reduce their expenses and to enhance the quality of service for customers. The enterprises should focus on their core business while outsourcing the non-core areas of business to external specialists for the purpose of reducing cost. In South Korea, the enterprises are becoming increasingly interested in outsourcing their logistics function, especially in using IT technologies to the 3PL. The underlying reason for this trend is because the logistics costs of Korean businesses are much higher than that of other advanced countries. This higher logistic costs weakens the price competitiveness of Korean companies in the overseas export markets and even dampening the balance of international trade. Domestically, the higher logistics costs have the effect of raising prices in the local markets and thus affecting the local economy. Therefore a solution is urgently needed to save the logistics costs for the Korean companies in the interest of increasing national competitiveness. Outsourcing to the 3PL is becoming an attraction solution to this problem. Thanks to the increasing supply of professional logistics companies, many of the enterprises are switching to the Third Party Logistics. Nevertheless the enterprises do not yet utilize the integrated third-party logistics services on a full scale. This study analyzes present conditions and problems of the domestic third-party logistics market and suggests directions for future development. To solve the problems in the domestic third-party logistics market, four actions are recommended. First there should be new supporting policies in the laws and regulations and a system for small and medium sized companies to grow. Solutions to structural problems such as abnormal multilevel merchandising, illegal operation of private cars, and freight dumping should be implemented concurrently. Furthermore, standards for new companies entry into the market should be enhanced to allow only the competitive distribution companies to enter the market. Second, development of variety of educational programs is needed through establishing human-resource development system and specialized formal educational institution focused on this market. Third, the third party distribution companies, which seek long-term relationships with the owners of goods, should endeavor to strengthen their communications capability. Fourth, adoption of high-tech distribution system and the advent of U-Logistics, making use of RFID is urgent. This study has the limitation of objectivity because it does not include various comparative case studies about companies relating to the Third Party Logistics and domestic franchise companies. However, this study is significant to the extent that it analyzes the general present conditions and the problems of domestic Third Party Logistics and suggests recommendations for revitalization of Third Party Logistics. For future studies, analyzing the successful cases of international third party logistics companies' empirical data and studying the application into domestic franchise companies would improve the objectivity of the results. This would assist the domestic third party logistics companies not only to perform excellent domestic logistics function but also to enter into the global market for international logistics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.41-51
• /
• 2015

The purpose of the Follies that were constructed for the Gwangju-Biennale were for urban regeneration, to activate the empty old-town areas, and to strengthen the tradition and sense of place of the city. However, the ten Follies constructed around the wall of the old castle reveal many problems including that of leaving Follies alone instead of actively using them, damage to shop-keepers nearby, and pedestrian inconvenience, which is different from the original purposes. This study is meant to help understand the source of the negative phenomena, and to offer plans that will be conductive to the role of urban regeneration through activating the Follies and the spaces around them. As results of the investigation, there was no context giving uniformity among the various Follies. Also, the study showed that the insufficience of designers' understanding of the circumference near the Follies and lack of a consensus between the citizens and designers in the process of making the Follies. The crucial solution for solving these problems, and bringing to life the original purpose of creating the Follies was derived as applying "human activity" to the Follies. This study suggested 'street performance' as an effective device for application to human activity. While a Folly has no fixed function, the development of space program categories based on the applied characteristics of each Folly, and the simulation thereof showed effective potential for attracting people and activating those stagnated spaces. Recently, Gwangju city depicted the second Follies in applications such as reading roon, toilet, and movable food cart, which have clear purpose and different characteristics from the first ones. However, the first Follies will not be moved or demolished. As they are located around the National Asia Culture Center, some of them are supposed to be used to view the center. Consequently, a counterplan for the continuous and efficient use of those Follies is needed. Gwangju has a plan for the installation of 100 Follies throughout the city and it is expected that this study will be a meaningful guide line for improved Follies in the future.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.208-218
• /
• 2012

Numerical simulation technique has been developed to calculate microwave backscattering from water surface. The simulation plays a role of a substitute for experiments. Validation of the simulation was shown by comparing with experimental results. Water area observations by microwave radar have been simulated to evaluate algorithms and systems. Furthermore, the simulation can be used to understand microwave scattering mechanism on the water surface. The simulation has applied to the various methods for water area observations, and the utilizations of the simulation are introduced in this paper. In the case of fixed radar, we show following examples, 1. Radar image with a pulse Doppler radar, 2. Effect of microwave irradiation width and 3. River observation (Water level observation). In addition, another application (4.Synthetic aperture radar image) is also described. The details of the applications are as follows. 1. Radar image with a pulse Doppler radar: A new system for the sea surface observation is suggested by the simulation. A pulse Doppler radar is assumed to obtain radar images that display amplitude and frequency modulation of backscattered microwaves. The simulation results show that the radar images of the frequency modulation is useful to measure sea surface waves. 2. Effect of microwave irradiation width: It is reported (Rheem[2008]) that microwave irradiation width on the sea surface affects Doppler spectra measured by a CW (Continuous wave) Doppler radar. Therefore the relation between the microwave irradiation width and the Doppler spectra is evaluated numerically. We have shown the suitable condition for wave height estimation by a Doppler radar. 3. River observation (Water level observation): We have also evaluated algorithms to estimate water current and water level of river. The same algorithms to estimate sea surface current and sea surface level are applied to the river observation. The simulation is conducted to confirm the accuracy of the river observation by using a pulse Doppler radar. 4. Synthetic aperture radar (SAR) image: SAR images are helpful to observe the global sea surface. However, imaging mechanisms are complicated and validation of analytical algorithms by SAR images is quite difficult. In order to deal with the problems, SAR images in oceanic scenes are simulated.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.75-103
• /
• 2014

The Quaternary faults are extensively observed along major inherited fault zones (i.e. Yangsan Fault System, Ulsan Fault, Yeonil Tectonic Line, Ocheon Fault System) in SE Korea. Their geometry and kinematics provide a very useful piece of information about the Quaternary crustal deformation and stress field in and around Korean Peninsula. Using magnetic fabrics (AMS), we attempted to determine the slip senses of Jinti, Mohwa, Suseongji2, and Wangsan faults and then interpreted the fabric development process of fault gouge and the characteristics of stress field during the Quaternary. All the magnetic fabrics of the faults, except the Wangsan Fault, consistently indicate a dominant reverse-slip sense with weak strike-slip component. Most of the oblate fabrics are nearly parallel to the fault surface and the anisotropy degrees generally increase in proportion to the oblatenesses. These results suggest that the fabrics of the fault gouges resulted from a progressive deformation due to continuous simple shear during the last reactivation stage as reverse faulting. It is also interpreted that the pre-existing fabrics were overwhelmed and obliterated by the re-activated faulting. Paleostress field calculated from the fault slip data indicates an ENE-WNW compressive stress, which is in accord with those determined from previous fault tectonic analysis, focal mechanism solution, and hydraulic fracturing test in and around Korean Peninsula.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.441-452
• /
• 1998

The c-fos is known as neuronal marker of second neurons which is activated by noxious peripheral stimulation. To investigate the changes of c-fos el(pression in the trigeminal nucleus complex during tooth movement, immunohistochemical study was performed. Experimental rats(9 weeks old, 210 gm 21 rats) were divided into seven groups(normal, 1 hour group, 3 hour group, 6 hour group, 12 hour group, 1 day group,3 day group). Rats in the normal group were anesthesized without orthodontic force. Rats in the experimental groups were applied orthodontic force (approximately 30 gm) to upper right maxillary molar. Frozen sections of brain stem were immunostained using rabbit antisera. The changes of c-fos expression were observed with respect to rostrocaudal distribution, laminar organization, md duration of orthodontic force application. The study results were as follows $\cdot$The c-fos nuclei in the dorsal part were observed from ipsilateral transition zone of subnucleus interpolaris and subnucleus caudalis to $C_1$ cervical dorsal horn rostrocaudally. The maximal peak point was the rostral part of subnucleus caudalis. The greatest proportion of c-fos cells were located within lamina I and II. $\cdot$The c-fos nuclei in the dorsal Part were observed from the most caudal part of subnucleus interpolaris to the middle part of the subnucleus caudalis. $\cdot$The number of c-fos immunoreactive dot increased at 1 hour group, reached its maximum at the 3 and 6 hour groups, and showed a decreasing trend after 12 hours. These results imply that nociceptive stimulation caused by continuous orthodontic force might be modulated by transition zone of subnucleus interpolaris and subnucleus caudalis, subnucleus caudalis, $C_1$ spinal dorsal hem.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.45-76
• /
• 2000

The purposes of this study were to investigate and understand the present status of various types of "deserts", such as sand desert, gravel desert, rock desert, earth desert, salt desert, desert, rocky desert, gobi desert, sandy desert, clay desert, etc., and the general countermeasures for the combating "desertification" "desertization", and to develop the technologies on the revegetation and restoration for the combating desertification in China. The methods of this study were mainly composed of field surveys on the several experimental sites and research institutes related to combating desertification in China, and examinations on the various technologies for the combating desertification at the Daxing Experimental Station of Beijing Forestry University. The conclusion from this study may be summarized as follows; 1. Status and tendency of desertification in China : China is one of the countries seriously threatened by desertification. Desertification affected areas in China are mainly distributed in arid, semi-arid and dry sub-humid areas in China, covering the most regions of the Northeast China (eastern region of Inner-Mongolia), the northern part of the North China (middle and western region of Inner-Mongolia, Shaanxi, Ningsha, Gansu) and the western part of the Northwest China (Xinzang, Qinghai, Xizang). The total area affected by desertification in China is approximately 2.622 million $km^2$. It covers 27.3% of the total territory of China. Until recently, it is estimated that the annual spreading ratio of desertification in China is 2,460 $km^2$. Therefore, desertification is mostly serious problems facing to the Chinese people. 2. The causes and environmental effect of desertification : The desertification in China is mainly caused by compound factors, including natural condition and human activities. In China, the desertification is started by the decrease of precipitation, continuous dry and drought, strong wind, wind and water erosion, land degradation and loss of natural vegetation caused by climate variation, and accelerated by the human activities, such as over-cultivating, over-grazing, over-cutting of woods, irrational use of water resources. Because desertification has affected the geographical features, soil nutrients contents, salinity, vegetation coverage and the functions of ecosystem, the environmental deteriorations in the desertification affected areas are very seriously. 3. The fundamental strategies of combating desertification in China are the increase of education and awareness of people through various mass media, the revision of laws to guarantee operation of Desertification Combating Law and to improve many relating laws and regulations, the application of advanced technologies and training of experts, the establishment of discriminative policies, and increasing arrangement of budget-investment, and so on. China, as a signed country in UNCCD, has made efforts for the combating desertification. Korea is also signed country in UNCCD, so we should play an important role in the desertification combating projects of China for the northest asia and global environmental conservation as well as environmental conservation of Korea.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.399-404
• /
• 1997

This paper is presenting a practical result of environmental manipulation effect on pine mushroom Tricholoma matsutake yield and a discussion of key factor seeking for improving pine mushroom production by analyzing the effects on mushroom yield for 10 years with applying five kinds of environmental control at the pine stands located in Namwon, Chollabuk-do, Korea. The environmental controls included density control and forest floor manipulations, and the treatments were applied during early summer of 1983. The mushroom yield itself did not show statistically significant differences among the treatments. But, we could manifest the treatment effects by calculating the relative yield in percent on the basis of pretreatment yield collected in 1982. The forest floor manipulation with density control may affect pine mushroom yield in short term, and continuous management should be applied to keep and improve the mushroom production. The fine root activity was the most important factor of pine mushroom production at the Namwon research site since the floor raking resulted in the largest effect on the mushroom yield although the environmental condition for the growth of fungi is important for pine mushroom production. In addition, the pine mushroom forest with sandy soils demands adequate litter layer since the litter removal showed relatively detrimental effects on pine mushroom yield compared to that in litter covered plot at the research site. That is, soil texture should be considered for forest floor manipulation, and it is reconfirmed that the environmental control to improve pine mushroom production should be applied differently by each region.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.341-356
• /
• 2015

A nation has a sovereign right to develop and use its natural resources according to its policies with regard to development and the relevant environment. A nation also has an obligation not to harm other countries or damage environments of neighboring countries as consequences of such actions of developments or use of natural resources. However, international precedents induce a nation to take additional actions not to cause more damages from the specific acts causing environmental damages beyond national borders, when such acts have economic and social importance. That is to say that there is a tendency to resolve such issues in a way to promote the balance between the mutual interests by allowing such actions to continue. A solution to China's Three Gorges Dam dilemma based on a soft law approach is more credible than relying on a good faith approach of national responsibilities and international legal proceedings since the construction and operation of the dam falls within the category of exercising national sovereign rights. If a large scale construction project such as the Three Gorges Dam or operation of a nuclear power plant causes or may cause environmental damage beyond the border of a nation engaged in such an undertaking, countries affected by this undertaking should jointly monitor the environmental effects in a spirit of cooperation rather than trying to stop the construction and should seek cooperative solutions of mutual understanding to establish measures to prevent further damages. If China's Three Gorges Dam construction and operation cause or contain the possibility of causing serious damages to marine environment, China cannot set aside its national responsibility to meet international obligations if China is aware of or knows about the damage that has occurred or may occur but fail to prevent, minimize, reverse or eliminate additional chances of such damages, or fails to put in place measures in order to prevent the recurrence of such damages. However, Korea must be able to prove a causal relationship between the relevant actions and resulting damages if it is to raise objections to the construction or request certain damage-prevention actions against crucial adverse effects on the marine environment out of respect for China's right to develop resources and acts of use thereof. Therefore, it is essential to cumulate continuous monitoring and evaluations information pertaining to marine environmental changes and impacts or responses of affected waters as well as acquisition of scientific baseline data with observed changes in such baseline. As China has adopted a somewhat nonchalant attitude toward taking adequate actions to protect against marine pollution risks or adverse effects caused by the construction and operation of China's Three Gorges Dam, there is a need to persuade China to adopt a more active stance and become involved in the monitoring and co-investigation of the Yellow Sea in order to protect the marine environment. Moreover, there is a need to build a regular environmental monitoring system that includes the evaluation of environmental effects beyond borders. The Espoo Convention can serve as a mechanism to ease potential conflicts of national interest in the Northeast Asian waters where political and historical sensitivities are acute. Especially, the recent diplomatic policy advanced by Korea and China can be implemented as an important example of gentle cooperation as the policy tool of choice is based on regional cooperation or cooperation between different regions.