• Journal of Animal Science and Technology
• /
• v.49 no.2
• /
• pp.279-286
• /
• 2007

A submerged biofilm sequencing batch reactor (SBSBR) process, which liquor was internally circulated through sandfilter, was designed, and performances in swine wastewater treatment was evaluated under a condition of no external carbon source addition. Denitrification of NOx-N with loading rate in vertical and slope type of sandfilter was 19% and 3.8%, respectively, showing approximately 5 times difference, and so vertical type sandfilter was chosen for the combination with SBSBR. When the process was operated under 15 days HRT, 105L/hr.m3 of internal circulation rate and 54g/m3.d of NH4-N loading rate, treatment efficiencies of STOC, NH4-N and TN (as NH4-N plus NOx-N) was 75%, 97% and 85%, respectively. By conducting internal circulation through sandfilter, removal performances of TN were enhanced by 14%, and the elevation of nitrogen removal was mainly attributed to occurrence of denitrification in sandfilter. Also, approximately 57% of phosphorus was removed with the conduction of internal circulation through sandfilter, meanwhile phosphorus concentration in final effluent rather increased when the internal circulation was not performed. Therefore, It was quite sure that the continuous internal circulation of liquor through sandfilter could contribute to enhancement of biological nutrient removal. Under 60g/m3.d of NH4-N loading rate, the NH4-N level in final effluent was relatively low and constant(below 20mg/L) and over 80% of nitrogen removal was maintained in spite of loading rate increase up to 100g/m3.d. However, the treatment efficiency of nitrogen was deteriorated with further increase of loading rate. Based on this result, an optimum loading rate of nitrogen for the process would be 100g/m3.d.

• Quality Improvement in Health Care
• /
• v.1 no.1
• /
• pp.96-108
• /
• 1994

Background: An appropriate use of hospital beds can improve productivity of hospital significantly. The authors' previous study revealed that approximately one third of Korean hospital bed days and one sixth of admissions were inappropriately used, when it was measured by Appropriateness Evaluation Protocol(AEP) and Delay Tool modified into Korean situation by the authors. This study aims to evaluate applicability of the instruments in a new hospital. More specifically the study aims to measure appropriateness of the instruments used by newly trained nurse reviewers at a new hospital setting. Methods: In order to evaluate applicability of these instruments, agreement rates of the scores recorded by newly trained nurse reviewers with by skilled nurse reviewer and also compared with the scores recorded by physician's implicit decision were assessed. Agreement rates were derived from concurrent application of AEP and Delay Tool to 52 admissions and 104 patient days from internal medicine, pediatrics, and general surgery of one university hospital. Overall agreement rate, specific nonacute agreement rate, and kappa statistics were used to indicate level of agreement. Results: Overall agreement rates on appropriateness between newly trained nurse reviewers and skilled nurse reviewer were 100% in admission and 98% in bed days. Overall agreement rates on reason for inappropriateness between newly trained nurse reviewers and skilled nurse reviewer were 96% in admission and 91% in bed days. Overall agreement rates between newly trained nurse reviewers and physician reviewer were 86% in admission and 87% in bed days. Conclusion: Results indicated that AEP and Delay Tool were applicable to a new hospital in detecting inappropriate utilization of beds and reasoning of the inappropriateness. These instruments could contribute to enhance efficiency of hospital use, through continuous monitoring of level of inappropriate hospital use at national or individual hospital level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.811-817
• /
• 2009

The rapid growth of network based IT systems has resulted in continuous research of security issues. Probe intrusion detection is an area of increasing concerns in the internet community. Recently, a number of probe intrusion detection schemes have been proposed based on various technologies. However, the techniques, which have been applied in many systems, are useful only for the existing patterns of probe intrusion. They can not detect new patterns of probe intrusion. Therefore, it is necessary to develop a new Probe Intrusion Detection technology that can find new patterns of probe intrusion. In this paper, we proposed a new network based probe intrusion detector(NePID) using anomaly traffic analysis and fuzzy cognitive maps that can detect intrusion by the denial of services attack detection method utilizing the packet analyses. The probe intrusion detection using fuzzy cognitive maps capture and analyze the packet information to detect syn flooding attack. Using the result of the analysis of decision module, which adopts the fuzzy cognitive maps, the decision module measures the degree of risk of denial of service attack and trains the response module to deal with attacks. For the performance evaluation, the "IDS Evaluation Data Set" created by MIT was used. From the simulation we obtained the max-average true positive rate of 97.094% and the max-average false negative rate of 2.936%. The true positive error rate of the NePID is similar to that of Bernhard's true positive error rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.495-500
• /
• 2020

As the prevention of dementia is more important than the treatment after the onset, attention has focused on the prevention of dementia in the elderly. For this study based on 11 integrated programs, we analyzed the domestic research trends of dementia prevention programs for the elderly from 2000 to 2018 in the study of Yang Su-gyeong, Ko Bo-sook, and Park Jeong-hwan (2019) We reviewed the literature research on the elderly's dementia prevention program centered on play. By activity type, music, language, and physical activity were 4 (40.0%), respectively, and games, art, and work were 3 (30.0%), respectively. Dance, literature, traditional play, and recreation were 2 (20.0%), and yoga and life were 1 (10.0%), respectively. In this study, for the purpose of exploring the possibility of using the contents of early childhood education in the elderly dementia prevention program, play shows very positive aspects such as physical exercise ability, positive emotions, and emotional characteristics for the elderly. It is considered that if dementia prevention programs are developed using the contents of early childhood education for the elderly, they will be able to utilize leisure time positively while providing continuous services and maintaining group experiences and mental health.

• Journal of Distribution Science
• /
• v.12 no.2
• /
• pp.81-93
• /
• 2014

Purpose - Recent rapid environmental changes in the hospital industry are accelerating the spread of customer satisfaction management. Customers' desires have become diversified and advanced; in the past, customers tended to preferred popularized and standardized care, whereas they now prefer individualized and differentiated care, based on an increase in income. Specifically, this study tries to analyze the mediating effects of factors that affect the configuration portion of customer value and relationship quality (customer trust and relationship commitment) by investigating the impacts and configuration factor of customer value on relationship quality and determining how these factors impact customer loyalty directly or indirectly. Research design, data, and methodology - This study aims to determine the customer value factors that impact the perceptions of dental hospital customers, how these factors impact relationship quality and customer loyalty, and the causal relationship of these factors, and to verify the research model based on previous research. To increase the validity and reliability of the questionnaire, the authors of this study constructed basic questions using measurement tools already verified for reliability and validity in existing studies. In this study, customer value is defined as customers' recognizing value by exchanging goods or services and is measured using a five-point Likert scale using 19 questions about the 4-Ds, such as convenience value, quick service, response value, and trustworthiness. For each question, "very low" was set at 1 point and "very high" at 5 points. Customer trust, relationship commitment, and customer loyalty are also measured using a five-point Likert 5-point scale (1 = very low, 5 = very high) based on previous studies. Results - For customer value, trustworthiness and quick service are shown to have direct significant positive impacts on customer loyalty. For customer value and quality of the relationship (customer confidence and commitment), trustworthiness, response value, confidence value, and quick service are shown to have a significant positive impact on customer truth, in order of impact. For the relationship between customer value and commitment, quick service and response value are shown to have significant positive impact. Customer confidence has a very high positive influence on commitment. For the relationship between the quality of the relationship (customer confidence and commitment) and customer loyalty, customer confidence is shown to have more of an impact than commitment, in terms of a direct influence of customer loyalty. Commitment showed a positive impact on customer loyalty. For the relationship between customer confidence and customer loyalty, commitment showed a mediating effect. Conclusions - Many additional variables could apply; this study focused on customer value, quality of the relationship, and customer loyalty. In particular, there will be significant value in identifying the relationships among customer value, relationship quality, and customer loyalty by using impact factors for customer value; ensuring external validity by expanding denotation and applying the findings to other service industries; and undertaking continuous research. This study has limited generalization potential because the target for this survey was located only in the Seoul area.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.429-436
• /
• 2019

The eLoran system is considered the best alternative because the vulnerability of satellite navigation systems cannot be resolved as perfect. Thus, South Korea is in the process of establishing a testbed of the eLoran system in the West Sea. To provide resilient navigation services to all waters, additional eLoran transmitters are required. However, it is difficult to establish eLoran transmitters because of various practical reasons. Instead, the positioning with NDGNSS/AIS source can expand the coverage and its algorithm with applying continuous waves is under development. Using the already operating NDGNSS reference station and the AIS base station, it is possible to operate the navigation system with higher accuracy than before. Thus, it is crucial to predict the performance when each system is integrated. In this paper, we have developed a simulation tool that can predict the performance of terrestrial integrated navigation system using the eLoran system, maritime NDGNSS station and the AIS station. The esitmated phase error of the received signal is calculated with the Cramer-Rao Lower Bound factoring the transmission power and the atmospheric noise according to the transmission frequency distributed by the ITU. Additionally, the simulation results are more accurate by estimating the annual mean atmospheric noise of the 300 kHz signal through the DGPS signal information collected from the maritime NDGNSS station. This approach can further increase the reliability of simulation results.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.157-168
• /
• 2009

The principal objective of this study was to provide basic data regarding health care services for middle-aged men, via an analysis of the relationships among stress level, food habits and well-being-related attitudes with social-demographic characteristics and health-related factors. The main findings of this study were as follows. The average age of the participants was $48.7{\pm}5.2$. With regard to health status, 18.8% of the participants were diagnosed with digestive diseases within the past year. Stress levels were higher in the participants with lower levels of educational attainment. Furthermore, participants who had become divorced or lived separately from their families, participants who did not have their own houses, and participants who reported low marital satisfaction also had high levels of stress. Our food habits scores revealed meaningful differences among the study subjects, and were shown to vary with marital satisfaction, occupation, and residence type. In terms of both the importance and practice level of well-being-associated food habits, the most frequent response in this study was 'Consume home-made food rather than processed or ready-to-eat food' ($4.30{\pm}0.86$, $3.68{\pm}1.04$). In terms of importance level, the factors most relevant to well-being in terms of food habits were education level, marital satisfaction, residence type, self-assessed health status, smoking, drinking, regular exercises and leisure activities. With regard to practice levels, the degree to which subjects engaged in food habits targeted toward well-being differed meaningfully depending on marital status, marital satisfaction, residence type, family type, self-assessed health status, smoking, drinking, nutritional supplement intake, regular exercises and leisure activities. After analyzing the correlation among stress level, food habit score and the attitude towards well-being-related dietary habits (importance and practice level), we observed a meaningful relationship between the four factors at the level of p<0.001. According to the above result, continuous attention to health, including the appropriate control of smoking and drinking, as well as, stress management, via regular exercises and appropriate food habits is expected to exert a positive influence on the prevention of disease, and is also expected to improve quality of life. For all well-being-associated items, the importance level was shown to be higher than the practice level. Thus, in order to foster health-oriented food habits, we recommend that a new plan be designed, targeted toward ease of active practice for middle-aged men.

• Steel and Composite Structures
• /
• v.6 no.6
• /
• pp.459-477
• /
• 2006

A theoretical research project is undertaken to develop integrated analysis and design tools for long span composite beams in modern high-rise buildings, and it aims to develop non-linear finite element models for practical design of composite beams. As the first paper in the series, this paper presents the development study as well as the calibration exercise of the proposed finite element models for simply supported composite beams. Other practical issues such as continuous composite beams, the provision of web openings for passage of building services, the partial continuity offered by the connections to columns as well as the behaviour of both unprotected and protected composite beams under fires will be reported separately. In this paper, details of the finite elements and the material models for both steel and reinforced concrete are first described, and finite element studies of composite beams with full details of test data are then presented. It should be noted that in the proposed finite element models, both steel beams and concrete slabs are modelled with two dimensional plane stress elements whose widths are assigned to be equal to the widths of concrete flanges, and the flange widths and the web thicknesses of steel beams as appropriate. Moreover, each shear connector is modelled with one horizontal spring and one vertical spring to simulate its longitudinal shear and pull-out actions based on measured load-slippage curves of push-out tests of shear connectors. The numerical results are then carefully analyzed and compared with the corresponding test results in terms of load mid-span deflection curves as well as load end-slippage curves. Other deformation characteristics of the composite beams such as stress and strain distributions across the composite cross-sections as well as distributions of shear forces and slippages in shear connectors along the beam spans are also examined in details. It is shown that the numerical results of the composite beams compare well with the test data in terms of various load-deformation characteristics along the entire deformation ranges. Hence, the proposed analysis and design tools are considered to be simple and yet effective for composite beams with practical geometrical dimensions and arrangements. Structural engineers are strongly encouraged to employ the models in their practical work to exploit the full advantages offered by composite construction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.42-48
• /
• 2002

In broadband wireless networks, the effective meeting of the QoS guarantees may strongly depend on the Contention Resolution Algorithm used in the uplink contention period. The time it takes a station to transmit a successful request to the base station, or request delay, must be kept low even during periods of high contention. If a request suffers many collisions, it cannot rely on the preemptive scheduler to receive low access delays. However, the conventional collision resolution algorithm has a problem that all collided stations are treated equally regardless of their delay from previous contention periods. Some requests may have very long request delay caused by continuous collisions. In this paper, we propose an adaptive collision resolution algorithm for fast random access in broadband wireless networks. The design goal is to provide quick access to the request with a high number of collisions. To do this, the proposed algorithm separates the whole contention region into multiple sub regions and permits access through each sub region only to the requests with equal number of collisions. The sub region is adaptively created according to the feedback information of previous random access. By simulation, the proposed algorithm can improve the performance in terms of throughput, random delay and complementary distribution of random delay by its ability to isolate higher priorities from lower ones. We can notice the algorithm provides efficiency and random access delay in random access environment.

• Korea Journal of Hospital Management
• /
• v.7 no.2
• /
• pp.99-123
• /
• 2002

This study was conducted to determine whether follow-up management is carried out continuously following CQI activity and to analyze the factors behind the success and failure of follow-up management. Past presentations from 1994-1999 of CQI coordinators and lecturers from various institutions who presented at The Korean Society of Quality Assurance in Health Care(KoSQA) on the conditions of follow-up management in each institution were analyzed. The results of this study were as follows; Since the number of subjects on CQI increased each year at symposiums, this has expanded to all medical institutions. Although medical institutions usually conduct 11-20 subjects on CQI per year, there were many such occasions where more than 31 subjects were conducted. Moreover, institutions with less than 800 beds have come up with more projects than those with more than 800 beds, thus 23.3% of these institutions had at least 1 person involved in 4 projects. This had created an overload of responsibilities for specific persons' involvement, prompting them to incline toward formalities in their work rather than substantial activities. Among the projects presented at the symposiums, 51.7% demonstrated that follow-up management could be carried out. In particular, 55.3% of the projects from provincial regions could carry out follow-up management compared to 48.8% in Seoul. Moreover, it was demonstrated that 80% of the projects from institutions with 600-799 beds carried out follow-up management most effectively. With regards to previous presentations, the older they were, it was found that follow-up management could not be effectively carried out. Some institutions that responded that follow-up management was carried out effectively in their institutions were found to have conducted follow-up management without any inspection strategies or the appropriate tools. CQI activities were executed and terminated with no consistency and team members had no real concern for it. The most important factors that contribute to an effective follow-up management are the need for concern and interest from the directors of the hospitals, from the relevant departments and team members in addition to the role of the supervising department, follow-up management through management of target goals, consistency in tasks along with communication between all team members. The biggest problems were perceived to be overload of work due to accumulation of proposed projects in addition to lack of awareness pertaining to follow-up management. CQI is beneficial for all staff for the improvement of the mind and business administration and thus it is believed to be desirable. To carry out follow-up management effectively, leadership, analysis and application of information, follow-up management and planning, as well as quality management are perceived to be essential, on the other hand, the results showed a significant difference. To prevent CQI activities from becoming just an activity, the basic system should be reconstructed and augmented based on the problems derived from the results of this study. Moreover, we hope this study will be used as reference material that would encourage the administration of follow-up management after CQI activities in most hospitals. Furthermore, various studies on follow-up management should be conducted for CQI activities in the future.