• 한국안전학회지
• /
• 제32권4호
• /
• pp.28-33
• /
• 2017

A sharp curved ballasted track on earthwork that was connected with a direct fixation slab track on steel box railway bridges have been deformed and damaged despite the frequently maintenance by a restoring force of sharp curved rail and track-bridge interaction forces such as axial forces and longitudinal displacement of continuous welded rail(CWR) owing to their structural characteristics, calling for alternatives to improve the structural safety and track irregularity. In this study, the authors aim to prove a cause of deformation for the sharp curved ballasted tracks to enhance the structural safety and track irregularity of ballasted track in service. A track-bridge interaction analysis and a finite-element method analysis for the sharp curved ballasted track were performed to consider the axial force and longitudinal displacement of CWR, the temperature and the effect of restoring force of sharp curved rail. From the results, the deformation of the sharp curved ballasted track with adjusted sleeper spacing from 833mm to 590mm were significantly reduced.

• 한국표면공학회지
• /
• 제33권1호
• /
• pp.48-55
• /
• 2000

• 대한치과교정학회지
• /
• 제48권5호
• /
• pp.339-345
• /
• 2018

Objective: The purpose of this study was to clarify the effects of continuous force application for extrusive tipping movement and occlusal interference on periapical root resorption in the rat mandibular first molar. Methods: We constructed an appliance comprising a titanium screw implant with a cobalt-chromium post as the anchorage unit and a nickel-titanium closed coil spring (50 cN) as the active unit. Force was applied on the mandibular left first molar of rats for 8 (n = 10) and 15 days (n = 10; experimental groups), with the tooth in occlusion. Five rats were included as a non-treated control group to examine the body effect of the appliance. Active root resorption lacunae, identified using tartrate-resistant acid phosphatase, were evaluated in terms of the length, depth, and area. Results: The rat mandibular first molars were mesially tipped and extruded in the occlusal direction. This mesio-occlusal tipping movement and occlusion resulted in the formation of a compression zone and active root resorption lacunae in the distoapical third of the distal roots. However, there was no significant difference in the amount of root resorption between the two experimental groups. The control group did not exhibit any active root resorption lacunae. Conclusions: Periapical root resorption was induced by continuous extrusive tipping force and occlusal interference in rat mandibular molars. These data suggest that we orthodontists had better take care not to induce occlusal interference during our orthodontic treatment.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.381-387
• /
• 2009

The end-milling force behaviour is very complex and it is related to a de-noising phenomenon, so it is very difficult to detect and diagnose this static cutting force phenomenon. This paper presents a new method of filtering of end-milling force in end-milling operation using filter bank technique, based on the wavelet transform. In this paper by comparing the history of end-milling force using wavelet filtering the fundamental end-milling property of the wavelet transform is well reviewed and analyzed. This result of wavelet transform using filter bank shows the possible static prediction of end-milling force with severe dynamic properties such as chatter in end-milling operation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.111-119
• /
• 2022

모듈형 CFT 부재를 이용한 연속 강박스 거더의 단면강성 증대 및 프리스트레싱 공법은 긴장재로 프리스트레싱된 CFT 모듈을 강박스 거더 하부플랜지와 일체화한 후 긴장재를 제거함으로써 발생하는 CFT 모듈의 복원력을 강박스 거더 하부플랜지의 프리스트레싱력으로 이용하고 일체화된 CFT 모듈이 강박스 거더의 단면 강성을 향상시킨다. 본 연구에서는 CFT 모듈을 이용하여 일체화된 강박스 거더에 대한 프리스트레싱 도입의 적용성을 검토하기 위하여 하부플랜지를 모사한 실험체를 대상으로 CFT 모듈을 이용하여 프리스트레싱 도입 실험을 실시하고 유한요소해석으로 도입 프리스트레스를 평가하였다. 또한 실제 강박스 거더에 대한 프리스트레스 도입과 CFT 모듈을 통한 단면강성 증대효과를 확인하기 위하여 연속지점부에 적용 가능한 강박스 단면에 대하여 CFT 모듈에 도입된 프리스트레싱력 및 CFT 모듈의 단면제원에 따른 유한요소해석을 실시하고 이를 비교하였다.

• 소성∙가공
• /
• 제6권6호
• /
• pp.482-488
• /
• 1997

New carbon equivalent equation for the better prediction for the better prediction of roll force in a continuous hot strip mill has been formulated by applying a neural network method. In predicting roll force of steel strip, carbon equivalent equation which normalize the effects of various alloying elements by a carbon equivalent content is very critical for the accurate prediction of roll force. To overcome the complex relationships between alloying elements and operational variables such as temperature, strain, strain rate and so forth, a neural network method which is effective for multi-variable analysis was adopted in the present work as a tool to determine a proper carbon equivalent equation. The application of newly formulated carbon equivalent equation has increased prediction accuracy of roll force significantly and the effectiveness of neural network method is well confirmed in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.99-105
• /
• 2009

This research presents the method to decide proper locations for destressing of CWR using a non-destructive equipments to measure the longitudinal force(installation temperature) in CWR. The effect and necessity of destressing were analyzed by estimating changes of longitudinal force. The installation temperature was measured to find changes of longitudinal force in high speed and conventional lines before and after destressing or track maintenance at the locations where destressing was planed or where change of longitudinal force was expected during track maintenance. Past destressing was carried out within qualitative decision criteria. This research proposes the quantitative criteria to decide the priority order of the destressing locations reasonably by considering the difference of air temperature and stress free temperature during the track maintenances, the grade of ballast resistance force recovering and the length of destressing, etc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.556-563
• /
• 1998

Railway bridges have a significant effect on the stress and displacement of continuous welded rail(CWR). Longitudinal compression force at high temperature, combined breaking or acceleration forces can introduce track buckling. On the other hand, longitudinal tensile forces, associated with low temperatures, in combination with breaking forces may break rail. Therefore, it is very important to work out thorough counter measures for those problems, specially in high speed rail which high safety is required. The exact evaluation of longitudinal force of rail has the key to the solution. The main aim of the present paper is to examine whether the longitudinal force of CWR's on Kyung-Bu-HSR satisfy the criteria to be fulfilled in the design of railway bridge. The analyses are carried out by using "CWRAP" program which was developed by our research group. The ballast resistance and breaking force effects on the longitudinal force of CWR are investigated.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.605-619
• /
• 2009

A comparative experimental study of prestressed continuous steel-concrete composite beams was carried out. Two continuous composite beams were tested, one of which was plain continuous steel-concrete composite beam, while the other was a composite beam prestressed with external tendons. Cracking behavior and the load carrying capacity of the beams were investigated experimentally. Full plasticity was developed in the mid-span section each beam, the maximum moments attained at the internal support sections however were governed by local buckling which was related to the slenderness of composite section. It was found that in hogging moment regions, the ultimate resistance of an externally prestressed composite beam would be governed by either distortional lateral buckling or local buckling, or interactive mode of these two buckling patterns. The results show that exerting prestressing on a continuous composite beam with external tendons will increase the extent of internal force and moment redistribution in the beam. The influences of local and distortional buckling on the behaviors of the composite continuous beams are discussed. The Moment redistribution and the load carrying capacity of the prestressed continuous composite beams are evaluated, and it is found that at the ultimate state, the moment redistribution in the prestrssed continuous composite beams is greater than that in non-prestressed composite beams.

• 조명전기설비학회논문지
• /
• 제18권1호
• /
• pp.122-128
• /
• 2004

본 논문에서는 가동자의 이동방향에 따른 진동과 고정자에 대하여 수직으로 작용하는 진동을 동시에 고려할 수 있는 이론을 제시함에 있어서, LSM의 구조를 기초로 자기등가회로를 구성하였으며, 자기등가회로에 대한 방정식을 이용하여 LSM의 전기적인 등가회로를 유도하였다. 그리고, LSM의 변위에 따른 수직력 분포를 유한요소법(Flux2D)으로 계산하였으며 이를 방정식으로 나타내었다. 최종적으로 1상 여자방식에 의한 가동자의 이동방향에 따른 진동과 고정자에 대하여 수직으로 작용하는 진동을 전압방정식, 추력 및 수직력 방정식, 운동방정식을 사용하여 ACSL(Advanced Continuous Simulation Language)에 의하여 시뮬레이션 하였다.