• 한국환경과학회지
• /
• 제14권11호
• /
• pp.1027-1033
• /
• 2005

The treatment of styrene vapor was carried out using the biofilter packed with loess/polyurethane composite during continuous operation of 74 days. The microorganisms were adapted within 2-3 days under the experimental conditions of inlet concentration and empty bed contact time (EBCT). At 200 sec of EBCT, the removal efficiency of styrene was 100\% with 200 ppmv of inlet concentration, while $92\%$ with 400 ppmv of inlet concentration. The biofilter showed the stable removal efficiencies of over $74\%$ under the EBCT range from 300 to 75 sec at the 150 ppmv of inlet styrene concentration. The maximum capacity of styrene removal for the biofilter packed with loess/polyurethane was $29g/m^3/hr$. During continuous operation of 74 days, pH of the drain water changed slightly and the pressure drop through the biofilter column was below $45\;mmH_2O/m$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.216-222
• /
• 2004

The caster roll shells have the good thermal conductivity and the low thermal expansion and have to exhibit high enough strength and good ductility at temperature up to $600^{\circ}C$. Thermal stress in particular is very high due to the contact with the liquid aluminium. The main stresses are of thermal origin, which bring a plastic fatigue on surface. This paper will represent one survey about the investigation of the failure of roll shells for continuous casters and an analysis using the simulation of the temperature distribution and the state of stress during hot rolling. Moreover, there will be a discussion on the roll shell of Mod. HAR 5 which is developed by heat treatment process. Mod. HAR 5 has advantages of high strength, high toughness and increased thermal stress resistance while maintaining the same productivity as the conventional roll.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.319-322
• /
• 2003

For the analysis of leveling process by the 3-dimensional elastic-plastic finite element method, a finite element analysis program modeling large deformation of shell has been developed. This program fur analyzing large deformation of sheet during leveling includes spring-back analysis as well as efficient contact treatment between sheet and rolls of leveler. This is verified by the simple leveling experiment with 5 rolls at laboratory. Besides the leveling examples, problems within the category of large strain and rotation, such as 3-dimensional roll-up and gutter occurrence at continuous bending-unbending process are also tested for verification of the program. The residual curvatures of strip predicted by finite element analysis are within 20% error range of the experiment. The formation and direction of anticlastic curvature or gutter during bending-unbending under tension is predicted and this agrees with the experimental results.

• Journal of Korean Medical Science
• /
• 제33권46호
• /
• pp.288.1-288.12
• /
• 2018

Background: Diarrheal and intestinal infectious disease caused by inadequate drinking water, sanitation, and hygiene (WASH) is not only a great concern in developing countries but also a problem in low-income populations and rural areas in developed countries. In this study, we assessed the exposure to inadequate WASH in Korea and estimated the burden of disease attributable to inadequate WASH. Methods: We used observational data on water supply, drinking water, sewage treatment rate, and hand washing to assess inadequate WASH conditions in Korea, and estimated the level of exposure in the entire population. The disease burden was estimated by applying the cause of death data from death registry and the morbidity data from the national health insurance to the population attributable fraction (PAF) for the disease caused by inappropriate WASH. Results: In 2013, 1.4% of the population were exposed to inadequate drinking water, and 1.0% were living in areas where sewerage was not connected. The frequency of handwashing with soap after contact with excreta was 23.5%. The PAF due to inadequate WASH as a cluster of risk factors was 0.353 (95% confidence interval [CI], 0.275-0.417), among which over 90% were attributable to hand hygiene factors that were significantly worse than those in American and European high-income countries. Conclusion: The level of hand hygiene in Korea has yet to be improved to the extent that it shows a significant difference compared to other high-income countries. Therefore, improving the current situation in Korea requires a continuous hand washing campaign and a program aimed at all people. In addition, continuous policy intervention for improvement of sewage treatment facilities in rural areas is required, and water quality control monitoring should be continuously carried out.

• 대한간호학회지
• /
• 제12권2호
• /
• pp.31-44
• /
• 1982

The purpose of this study was to analyze the relationship between maternal attachment and discharge against advice in high risk infants and determine the factors which affect discharge against advice. Data of this study were collected by means of reviewing the medical records of 127 in-patients who were diagnosed as high risk infants in admission and interviewing of the mothers of these patients was done by telephone. The high risk categories were neonatal hyperbilirubinemia, congenital anomaly, congenital heart disease, blood disorder, neonatal infection and birth injury. Maternal attachment was measured by deviding the subjects into 2 groups, the one the continuing treatment group and the other the discharge against advice group. Maternal attachment is determined by an interplay of maternal attitude and specific infant behaviors. Maternal attachment developes through continuous physical and psychological contact between mother and infants. Later it developes into maternal love. The results were as follows: 1. There was a significant association between maternal attachment and discharge against advice, that is, the attachment score was higher in the continuing treatment group. 2. Inspite of controlling medical insurance, severity of disease and the length of stay, it was found that there continued to be either a partially significant or fully significant relationship between maternal attachment and discharge against advice. Stepwise multiple regression revealed that maternal attachment was second in importance as a predictor of discharge against advice, which indicates that maternal attachment was a significant predictor of discharge against advice. 3. Stepwise multiple regression revealed that in 32.3％ of these cases the significant predictors of discharge against advice were length of stay, maternal attachment, delivery type, feeding type and income.

• Environmental Engineering Research
• /
• 제20권2호
• /
• pp.199-204
• /
• 2015

In this study, a novel phosphorus removal filter made of brass scrubber with higher porosity of over 96% was fabricated and evaluated. The brass scrubber was surface-modified to form copper hydroxide on the surface of the brass, which could be a phosphate removal filter for advanced wastewater treatment because the phosphates could be removed by the ion exchange with hydroxyl ions of copper hydroxide. The evaluation of phosphate removal was performed under the conditions of the batch type in wastewater and continuous type through filters. Filter recycling was also evaluated with retreatment of the surface modification process. The phosphate was rapidly removed within a very shorter contact time by the surface-modified brass scrubber filter, and the phosphate mass of 1.57 mg was removed per gram of the filter. The possibility of this surface-modified brass scrubber filter for phosphorus removal was shown without undesirable sludge production of existing chemical phosphorus removal techniques, and we feel that it would be very meaningful as a new wastewater treatment.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.19-26
• /
• 1996

Melt-quenching of steels leads to various metallographic effects such as refinement of grain size, extension of the solid solubility of carbon and alloying elements, and is expected to improve the mechanical properties of conventional steels. Furthermore, this technique is a useful method for producing sheet directly from liquid state. And it will lend itself to development as a continuous cast process which offers significant savings in energy and product costs. The purpose of this study is to present the microstructures of melt-quenched austenitic stainless steels. As the results of this study, the morphology of melt-quenched microstructure show that the roll contact area is columnar structure, and the free surface area is dendrite structure. As the line speed increases, the ratio of $d_{colunnar}/d_{total}$ increases from 0.12 to 0.60, but the ribbon thickness decreases from $150{\mu}m$ to $30{\mu}m$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.227-230
• /
• 2003

Silicone rubber has very excellent chemical stability and hydrophobicity. A hydrophobic surface can prevent the formation of continuous water films on the surface in wet and heavily contaminated conditions. This phenomenon contributes to the suppression of leakage current and partial discharges on insulator surfaces. Silicone rubber has been used much for housing materials of polymer insulators. ATH is added to the silicone rubber for improvement of its resistance against surface discharge. In this paper, ATH with different particle size and content was added to the silicone rubber during compounding. Silicone rubber was deteriorated by a corona treatment. Hydrophobicity recovery rate after corona treatment and arc resistance of silicone rubber were investigated. Hydrophobicity recovery rate of silicone rubber was evaluated by the measurement of contact angle. Arc resistance was evaluated by measuring weight loss of silicone rubber after arc resistance test. It was observed that the hydrophobicity recovery rate and arc resistance of silicone rubber were different when different particle size and content of ATH were added.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.13-18
• /
• 1994

Sapwood samples of pitch pine were treated with disodium octaborate alone by dip-diffusion, or in combination with water-repellent preservative(WRP) and methyl metacrylate(MMA). Treated samples were subjected to an accelerated leaching test for determining the improvement of leaching resistance and to soft rot and mold tests for evaluating the increase in bioefficacy, due to the addition of WRP and MMA applied as a second treatment. The addition of WRP and MMA retarded leaching of boron to some extent from treated samples and this retardation can be explained by improved water repellency of WRP and MMA treated samples. Borate /WRP and borate /MMA systems will not qualify borate treated wood for ground and fresh water contact use but may improve performance of borate treated wood in above-ground applications not subjected to continuous wetting conditions. Bioefficacy against soft rot fungi and mold fungi was improved by a second treatment with WRP. However, improvement in the performance of borate /MMA systems was not observed. Considering improvement in both resistance of leaching and bioefficacy against micro fungi by the treatment of WRP and MMA, simultaneously, the dual treatment of borate treated wood by MMA containing co-biocides might be believed as an ideal treatment system.

• 보존과학회지
• /
• 제35권2호
• /
• pp.177-186
• /
• 2019

국내 목조문화재 흰개미 방제법 중 하나인 토양처리법에 적용되는 약제는 우천이나 지중의 수분 거동에 의해 방의 효력 저하가 진행되어 재처리가 요구되지만 현재 해당 기준 및 평가 방안은 전무한 실정이다. 이에 따라 약제의 방의 효력 평가 및 재처리 기간 산정을 위한 기초 실내 평가 방안을 제시하였다. 먼저 약제 방의력 평가를 위해 흰개미에 대한 기피성 및 접촉 독성을 실시하였다. 그 결과, 이번 실험에 사용된 약제는 비기피성이며, 접촉에 의한 사멸이 확인되었다. 이후 모의 강우 실험과 토양 관통 시험을 통해 토양 내 약제의 방의 효력 임계점을 산정하는 지속성 평가를 실시하였고 해당 자료를 기상 자료와 비교하여 재처리 기간을 산정하였다. 지속성 평가 결과, 약 160~170 mm 이상의 지속적인 수분 노출 이후에는 약제 처리 토양에 대한 흰개미의 천공이 확인되었다. 해당 결과를 최근 5년간 기상 자료와 비교한 결과, 본 실험에서 사용된 농도의 약제는 우리나라 장마철과 여름철 집중호우 기간이 지난 9월 이후 처리할 경우 약 1년 정도 방의 효력이 유지될 것으로 예상된다. 본 연구는 향후 국내 흰개미 방제를 위한 토양처리용 약제의 선정 매뉴얼 작성과 재처리 기간 산정을 위한 기초자료를 제공 할 수 있을 것으로 기대된다.