• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.149-153
• /
• 1999

During a hemisphere-type compression molding, the wrinkles are caused by complex stress condition. It is very important to clarify the degree of wrinkles in order to have good products. In this paper, the effects of numbers of needling and initial area on the degree of wrinkles are studied. the degree of wrinkle is expressed as nonhomogeneity.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.455-466
• /
• 2013

In recent years, many countries have added railway noise to the issues covered by noise regulations. It is known that the rail is the dominant source of rolling noise at frequency range of 500Hz-2000Hz for the conventional speeds (<160km/h). One of the effective ways to reduce noise from railway track is using a rail vibration absorber. To study the acoustic performance of rail absorber, the decay rates of vibration have long been used by researcher. In this paper, A FE model of a periodic supported rail with infinite element in ABAQUS is developed to study the acoustic performance of the rail absorber. To compute the decay rates, acceleration responses along the rail transferred to MATLAB to obtain response levels in frequency domain and then by processing the response levels, the decay rates obtained for each1/3octav band. Continous rail absorber is represented by a steel layer and an elastomer layer. The decay rates for conventional rail and rail with one-side absorber and also, the rail with two side absorber are obtained and compared. Then, to improve the system of rail absorber, a steel plate with elastomer layer is added to bottom of the rail foot. The vertical decay rate results show that the decay rate of rail vibration along the track is significantly increased around the tuned frequency of the absorber and thus the rail vibration energy is substantially reduced in the corresponding frequency region and also effective in rail noise reduction.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.75-78
• /
• 1987

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제13회 학술발표회 논문개요집
• /
• pp.20-20
• /
• 1997

• 대한방사선기술학회지:방사선기술과학
• /
• 제18권2호
• /
• pp.3-14
• /
• 1995

• 대한방사선협회지
• /
• 제28권1호
• /
• pp.340-340
• /
• 2002

• 한국측량학회지
• /
• 제10권2호
• /
• pp.49-55
• /
• 1992

수피표고모형에 있어서 표고자료의 추출은 매우 중요하다. 표고의 추출은 스캐닝방법과 디지타이징 방법이 있으나 본 연구에서는 디지타이징에 대한 것이다. 연속적 추출법은 하나의 등고선을 동일한 개체로 묶는 것이며, 정규적자법은 각 격자를 대표할 수 있는 표고데이타를 직접 읽는 방법이다. 그리고 지성선을 구성하는 등고선내의 추출점을 동일의 개체로 묶는 방법이 불규칙 삼각망법이다. 연구결과에서 연속적 추출법은 입력시간이 적게 걸렸으며, 불규칙 삼각망법은 추출점의 수가 가장 적게 나타났다.

• Journal of Plant Biology
• /
• 제5권1호
• /
• pp.7-8
• /
• 1962

A new suggestion on the calssification of trees in the two types: 1) Continous tree or half continuous tree 2) Uncontinuous tree is described and the list of continuous tree in Korea shown.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.319-331
• /
• 1990

The purpose of this study was to help examining force system, optimal treatment, and prevention of relapse. Orthodontic force was generated by electromagnets, therefore duration could be freely controlled, and applied for 4 days in dogs. Force magnitude was 200gm and 50gm. duration was contious and intermittent. Intermittent duration was divided into 2 kinds of types in on/off, 1 mininute/1 minute, 10 seconds/1 minute. The results were as follows: 1. In the intermittent group to which force was applied for 10 seconds and ceased for 1 minute, osteoclast was not observed. 2. In the intermittent group to which 200gm of force was applied for 1 minute and ceased for 1 minute, there was blood circulation in periodontal space on pressure side, but mild hyalinized zone was observed. 3. More number of total osteoclast was counted in the pressure side of continous group to which 200gm of force was applied than in any other groups. 4. More number of frontal osteoclast was counted in the pressure side of intermittent group to which 200gm was applied for 1 minute and ceased for 1 minute than in any other groups. 5. On tension side, less periodontal space widening, more new bone and secondary cementum formation were observed in the intermittent group to which force was applied for 1 minute and ceased for 1 minute than in the continous group.

• 한국국방경영분석학회지
• /
• 제3권1호
• /
• pp.109-114
• /
• 1977

There are some factors which cause the profits from the production to be decreased or increased. They are, for example, the rise in efficiency of production facilities resulting from the development of the scientific technique, the changes of purchase price of those, and the drop in efficiency of those owing to there long-term operation. In this connection, an manager can get the highest profit by deciding the proper time of new facilities replacement for those in operation or in being planned, which leads to good management planning of his manufactaring business for a given period or a long time. Main purpose of this is the study of how we decide the optimal time or facilities replacement in order to maximize the total profits for a given period by considering them as continous function as to the time in the case where a machineng is set. The results are following: 1. The definition of profit function is in duced in consideration of the breakdowns caused from continous operation of the machinery. 2. The necessary conditions are obtained for the optimal time of replacement and find out the methods of its solution. 3. Comparing between the 'Short cut' method and method in this paper, we obtained that our method is more realistic.