• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.518-525
• /
• 2007

The thermomechanical properties and morphologies of nanocomposite fibers of poly(ethylene terephthalate)(PET) incorporating thermally stable organoclays are compared. Dodecyltriphenyl-phosphonium-mica($C_{12}PPh-Mica$) and 1-hexadecane benzimidazole-mica ($C_{16}BIMD-Mica$) were used as reinforcing fillers in the fabrication of PET hybrid fibers. Dispersions of organoclays with PET were studied by using the in-situ polymerization method at various organoclay contents to produce nano-scale composites. The thermo-mechanical properties and morphologies of the PET hybrid fibers were determined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), wide angle X-ray diffraction (XRD), electron microscopy (SEM and TEM), and a universal tensile machine (UTM). Transmission electron microscopy (TEM) micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nano-scale, although some clay particles are agglomerated. We also found that the addition of only a small amount of organoclay is enough to improve the thermal stabilities and mechanical properties of the PET nanocomposite fibers. Even polymers with low organoclay content (<5 wt%) were found to exhibit much higher thermo-mechanical values than pure PET fibers.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.8-11
• /
• 2010

In this study, a new thin films passivation technique using Zn with high electronegativity and $MgF_2$, a fluorine material with better optical transmittance than the sealing film materials that have thus far been reported was proposed. Targets with various ratios of $MgF_2$ to Zn (5:5, 4:6 and 3:7) were fabricated to control the amount of Zn in the passivation films. The Mg-Zn-F films were deposited onto the substrates and Zn was located in the gap between the lattices of $MgF_2$ without chemical metathesis in the Mg-Zn-F films. The thickness and optical transmittance of the deposited passivation films were approximately 200 nm and 80%, respectively. It was confirmed via electron dispersive spectroscopy (EDS) analysis that the Zn content of the film that was sputtered using a 4:6 ratio target was 9.84 wt%. The Zn contents of the films made from the 5:5 and 3:7 ratio targets were 2.07 and 5.01 wt%, respectively. The water vapor transmission rate (WVTR) was determined to be $38^{\circ}C$, RH 90-100%. The WVTR of the Mg-Zn-F film that was deposited with a 4:6 ratio target nearly reached the limit of the equipment, $1\times10^{-3}\;gm^2{\cdot}day$. As the Zn portion increased, the packing density also increased, and it was found that the passivation films effectively prevented the permeation by either oxygen or water vapor. To measure the characteristics of gas barrier, the film was applied to the emitting device to evaluate their lifetime. The lifetime of the applied device with passivation was increased to 25 times that of the PLED device, which was non-passivated.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.1-11
• /
• 1998

This study was performed to analyze the occupational health nursing of support-project of health management skill for small-scale industries. The 2 subject centers were under the umbrella of Korean Industrial Health Association and data collection period was 2weeks from September 1 to 13. 1997 and time and motion study method was used. Data was handled by SPSS win 7.5 program. results were worked out number. percentage. F-value. (1) The weekly time spending of occupational health nurses was distributed into indoor service 46.9%, outdoor service 26.6%, movement 26.5%. The mean visiting times were 2-3 times per week. and spending time was about 1 hour per industry. (2) There are statistically significant difference among the distribution of time spending according to industrial works(F=23.08. p=.000). and the special education for occupational disease prevention takes the most mean time. (3) There were statistically significant difference among the spending time for the health coach of occupational health nurses(F=188.79. p=.000). and the activity time for workers (58.4%) was more than that of for monitors(41.6%). The frequency of health coachs were 155 times for monitors during two weeks. but health coach for worker was 87 times. As a results. the contents of health coach for workers was proved to take more time than that for monitors. Perhaps we think that monitors has limitation for health management. therefore we should be consider flexible management of visiting time and health coach guidelines for occupational health nurses. (4) There were statistically significant differences among the distribution of time spending according to health coach methods for industrial health nurses(F=66.31. p=.000). The most frequent method of all was guide transmission. 159 times(65.7%), and the mean spending time for instruction was 19.78 min. the longest time. Our suggestion for occupational health nursing of support-project of health management skill for small-scale industry is that the need of each industry is very complex because of various conditions. therefore need assessment for industries should be conducted professionally. And occupational health nurses should apply occupational health nursing process autonomously. and their activities be guaranted by the guideline

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.72-77
• /
• 2007

This study was conducted to investigate the effect of functional cover film on oriental melon fruit quality under unheated plastic greenhouse cultivation in cold period. The 6 kind of films having different characteristics were covered at plastic greenhouses and oriental melon seedlings were cultivated at 2 regions of Seongju, respectively. The air-temperatures in plastic greenhouses of J-1 and J-2, having high infrared absorption rate, were about $2{\sim}5^{\circ}C$ higher than K-3. The contents of ${\beta}-carotene$ and sugar of fruit showed significant difference between functional and normal films. The sucrose, determining a sweetness during maturation, and soluble solids content of fruits cultivated in J-1, J-2, J-3, and K-1 were higher than those of K-2 and K-3. Ascorbic acid of fruits was highest in K-2 having low light transmission rate and thermo-keeping capacity. There was no significant difference in mineral content among all of cover films. These results indicated that the use of functional greenhouse covering films could improve fruit quality such as ${\beta}-carotene$ and sugar content of oriental melon.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.185-192
• /
• 2010

Platelets originating from Megakaryocyte are sensitive to radiation along with white blood cells, and thus these platelets are used as an index of radiation hazard as they decrease in advance. Thus, when there is a scarcity of platelets, dot hemorrhage occurs and it leads to decrease of blood corpuscle and a decline in immunity. In particular, when 4~6 Gy whole body irradiation is received, after three weeks, the platelets will decrease to the lowest level, which can be a cause of death by bleeding and anemia. Therefore, this study tried to identify the mechanism of platelet damage and protection effect. The protection substance used in the experiment is Alliin, which is a component of garlic, and it was observed by an Transmission Electron Microscope(TEM) after its injection to the rat's tail vein. In the study, it was found that the cell membrane was severely damaged in a 10-day progressed platelet organ after receiving 5 Gy irradiation. It billowed as balloon-like figure and the glycocalyx became hyperplasia. The minute organ was damaged to the point that it was beyond recognition in a 20-day progressed platelet organ after receiving irradiation, and the cytoplasmic contents were exposed to epilepsy parts and outrageously damaged. Furthermore, the form of granules could also not be observed. A hole was formed in the middle, and the damaged organ was found in a 30-day progressed platelet. However, the form of granules was consistently maintained in the experiment group injecting Alliin, as with the control group, and there was no damage to the cell membrane recognized. Thus, it was possible to verify the effectiveness of radiation protection of the platelet when Alliin was injected to the blood vessel.

• Journal of The Korean Association For Science Education
• /
• v.33 no.4
• /
• pp.807-825
• /
• 2013

This study investigated two science teachers' practical knowledge shaped during their science classes which intend to realize social construction of scientific models. The teachers' practical knowledge was qualitatively examined in terms of five content categories defined by Elbaz through the reflection-in-action based on video data of their teaching as well as the reflection-on-action based on their narratives and interview data obtained after their classes. The results shows: 1) two science teachers implemented their practical knowledge on appropriate subject matter knowledge when they provided students with scaffoldings to support building scientific models during the classes. 2) The teachers' knowledge about science curriculum played important roles to change the purposes of the classes from the transmission of difficult science concepts to the construction of scientific model appropriate to learning goals. 3) The teachers' implementation of pedagogical knowledge changed toward supporting students' group activities and model generations aligned to the intention of social construction of scientific models. 4) The teachers' practical knowledge about their 'selves' showed that a teacher's perception and implementation of his/her roles of helper, guide, or facilitator are important for students to construct scientific models through group activities. 5) The two teachers' practical knowledge the milieu of schooling is realized by their modes of interactions with student groups during their classes. Two teachers acted like a co-player with his students or like a coach to students near a playground. We discussed domain-specific characteristics about scientific model construction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.362-369
• /
• 2018

In this paper, we propose a procedure to multiple SNS channels automatic streaming through multiple output channels including the output channel of an external streaming server. The multiple SNS channels automatic streaming server includes an output management module for controlling the transmission of video contents to RELAY module that establish two or more output channels. In this paper, we experimented by separate with HD and FHD video using RELAY module in multiple SNS channel automatic streaming. In stream modules using RELAY module of HD video, when the publisher client and the player client and the RELAY module are 1 channel, the occupancy rate of CPU is 0.6% and the occupancy rate of heap memory is 0.3%(20 Mbyte). When the publisher client and the player client and the RELAY module are 183 channels, the occupancy rate of CPU is 99.9% and the occupancy rate of heap memory is 45.8%(3.7Gbyte). Therefore, the paper is not limited to the size of the streaming server by extending the output channel from which the video is transmitted to the output channel of the external streaming server. And a process of allocating an output channel of an external streaming server to an output channel through which an video is transmitted can be easily performed, so that an efficient output channel management can be performed even when a plurality of videos are transmitted.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.135-142
• /
• 2004

Poly(vinyl acetate) (PVAc) prepared by emulsion polymerization has broad applications for additives such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly(vinyl acetate-co-butyl acrylate) (VVc-BA) was synthesized using potassium persulfate as catalyst and poly(vinyl alcohol) (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced colloid stability, adhesion, tensile strength and elongation. During VAc-BA emulsion polymerization, no coagulation and complete conversion occur with the reactant mixture of 0.7wt% potassium persulfate, 15wt% poly(vinyl alcohol) (PVA-217), and the balanced monomer that the weight ratio of vinyl acetate to butyl acrylate is 19. As the concentrations of PVA increase, the copolymerization becomes faster and polymer particles are more stable, resulting in enhanced mechanical stability of the VAc-BA copolymer. However, the size of the polymer particles decreases with increasing PVA contents. Properties of the VAc-BA copolymer, such as minimum film formation temperature, glass transition temperature, surface morphology, molecular weight and molecular weight distribution, tensile strength and elongation, were characterized using differential scanning calorimeter, transmission electron microscope and other instruments.

• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.97-106
• /
• 2000

To develop the grain moisture meter using microwave free space transmission technique, a 10.5GHz microwave signal with the power of 11mW generated by an oscillar with a dielectric resonator is transmitted to an isolator and radiated from a transmitting $2{\times}2$ microstrip patch array antenna into the sample holder filled with the 12 to 26%w.b. of Korean Hwawung paddy rice. the microwave signal, attenuated through the grain with moisture, is collected by a receiving $2{\times}2$ microstrip patch array antenna and detected using a Shottky diode with excellent high frequency characteristic. A pair of light and simple microstrip patch array antenna for measurement of grain moisture content is designed and implemented on atenflon substrate with trleative dielectric constant of 2.6 and thickness of 0.54 by using Ensemble ver. 4.02 software. The aperture of microstrip patch arrays is 41 mm width and 24mm high. The characteristics of microstrip patch antenna such as grain. return loss, and bandwidth are 11.35dBi, -38dB and 0.35GHz($50^{\circ}$ at far-field pattern of E and H plane. The width of the sample holder is large enough to cover the signal between the antennas temperature and bulk density respectively. The calibration model for measurement of grain moisture content is proposed to reduce the effects of fluectuations in bulk density and temperature which give serious errors for the measurements . From the results of regression analysis using the statistically analysis method, the moisture content of grain samples (MC(%)) is expressed in terms of the output voltage(v), temperature (t), and bulk density of samples(${\rho}b$)as follows ;$$MC(%)\;=\;(-3.9838{\times}10^{-8}{\times}v^{3}+8.023{\times}10^{-6}{\times}v^{2}-0.0011{\times}v-0.0004{\times}t+0.1706){\frac{1}{{\rho}b}}{\times}100$ Its determination coefficient, standard error of prediction(SEP) and bias were found to be 0.9855, 0.479%w.b. and -0.0.369 %w.b. respectively between measured and predicted moisture contents of the grain samples.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.299-323
• /
• 2017

Interests to cultural prototype as a material of cultural contents are getting more increasing nowadays. One of them is myth. The important thing when you are dealing with the myth as the material that how to convert prototype narratives. Today, digital culture is becoming one of the essential elements of mankind, that is a new sociocultural phenomenon and distinguishing differentiation from the past analogue era. In this regard, the combination of mythology and digital culture is effective strategies for transforming storytelling that can resonate with people who are not familiar with myths. puts the view both of this world and underworld, mythical characters, and various elements of the Grim Reaper into the story. And combines them with digital elements. sets the world that the transcendental soul exists as physically transferred data form. and reinterprets the traditional mythology world into the digitally operated world. Soul-Phone from this anime reflects the digital culture such as storage and transmission, and helps enjoying audiences accept the unfamiliar world of myth. And also It symbolically shows dystopian viewpoints through side effects can caused by digital technology development, such as the instrumentalization of human being, the risk of communication through digital media, and ego-loss caused by duplication, etc. In conclusion, forms a consensus with the audience through the transformation strategy of storytelling that converts the world of myth into the digital world. And it reflects the dystopian view and shows a differentiated world view from the narrative of myth.