• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.3
• /
• pp.39-46
• /
• 1991

The effects of austenitizing temperatures and times and cooling rate on the characteristics of continuous air cooling have been investigated for 0.3%C-Mn steels microalloyed with vanadium. Transformation start temperatures have been found to be measured from temperature-time curve directly obtained with continuous air cooling and to decrease with increasing austenitizing temperature, cooling rate and Mn contents. The coarsening behavior of austenite grain size has been measured to abnormally grow at $1050^{\circ}C$ and rapidly grow at $1200^{\circ}C$. It has been found that the volume fraction of pearlite was linealy proportional to the reciprocal square root of austenite grain size. The hardness has been measured to increase with increasing cooling rate up to $250^{\circ}C/min.$ and to remain relatively unchanged in the range of $250{\sim}400^{\circ}C/min.$ showing that hardness valves for steel with a higher Mn content increase more than those for steel with a lower Mn content. The impact property has been found to decrease with increasing of austenite grain size but does not linealy change with the reciprocal square root of austenite grain size.

• Health Policy and Management
• /
• v.28 no.3
• /
• pp.233-239
• /
• 2018

A rapid decrease of total fertility rate to 1.08 in 2005 prompted the Korean government to plan and implement a '5-year plan for ageing society and population policy' starting from 2006. The 1st and 2nd 5-year plans had not shown any discernible impact on the fertility and the 3rd 5-year plan was launched in 2016. However, the fertility rate is going down further. The author reviewed the contents and assessment reports of the fertility promotion plan to suggest ideas for complementing the shortcomings of it. Author defined the major determinants of marriage and child birth as philosophy, politics, sense of value, social norm, culture, healthcare, and education. The plan was examined in view of these determinants. Transformation of Korea from an agricultural society to an industrialized society in a short period of time had brought about changes in most of the determinants of marriage and child birth; in particular philosophy and sense of value. These aspects were not put into consideration in the plan. Author suggested to launch a social education program for the general public to establish a sound philosophy of life, reform the sense of value on family, child birth and education, and cultivate the skill to draw a consensus through discussions on the social issues. A special program to promote marriage of women at the optimum age for child birth was proposed. The government should implement well balanced policy for economic development and labor. Multidisciplinary approach was recommended for these tasks.

• Journal of the Korean housing association
• /
• v.17 no.2
• /
• pp.63-75
• /
• 2006

The exploration of the spatial structure of a particular urban area, or the analysis of the tendencies of spatial consumption among urbanites, can be a literary-geographical attitude, shifting literary interests toward geography. It may also constitute a field of cultural geography that reads texts as cultural symbols. Based on this kind of attitude, the paper reads the literature of Park Wan So, particularly the popular novels that involve urban and residential spaces of Seoul, as a cultural text that carries a kind of symbolism. It proceeds with the idea that most popular novels reflect the mass phenomena of its times, and that representing real cultural experiences through text, it becomes a means of generalizing the identity shared by the anonymous masses and the characteristics of particular places. Hence the individuality of Park Wan So, who moved to Seoul during the Japanese colonial period and hence forth lived as a middle-class citizen, is inseparable from her literary work. With this attitude and methodology, the paper argues that in the urban space of metropolitan Seoul, the modern ambivalent gaze of the colonial period shifted toward increasingly new value systems, and was replaced by a dichotomous view, and furthermore, that the contents of this dichotomous view has experienced a multivalent transformation through the accumulation of time and the expansion of space.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.87-92
• /
• 2020

This study deals with the effects of austempering time on the microstructure and mechanical properties of ultra-high strength nanostructured bainitic steels with high carbon and silicon contents. The steels are composed of bainite, martensite and retained austenite by austempering and quenching. As the duration of austempering increases, the thickness of bainitic ferrite increases, but the thickness of retained austenite decreases. Some retained austenites with lower stability are more easily transformed to martensite during tensile testing, which has a detrimental effect on the elongation due to the brittleness of transformed martensite. With increasing austempering time, the hardness decreased and then remained stable because the transformation to nanostructured bainite compensates for the decrease in the volume fraction of martensite. Charpy impact test results indicated that increasing austempering time improved the impact toughness because the formation of brittle martensite was prevented by the decreased fraction and increased stability of retained austenite.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11a
• /
• pp.49-58
• /
• 2001

We tried to introduce two forsythia genes related in lignan biosynthesis, dirigent protein and pinoresinol/lariciresinol (P/L) reductase, into potatoes for accumulation of lignans in transgenic potatoes. We made binary vectors overexpressing dirigent protein gene and P/L reductase gene driven by a CaMV35S promoter and transformed into potatoes via Agrobacterium mediated transformation. And in order to control the metabolic flux of lignan biosynthesis pathway, we tried to inhibit chalcone synthase genes of potatoes by antisense inhibition technique also. We tried to use PCR screening method for selection of transgenic plants of different vectors. We tried to determine and compare lignan contents from different transgenic potato lines.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.10 s.253
• /
• pp.1284-1292
• /
• 2006

Heat treatment is a controlled heating and cooling process to improve the physical and/or mechanical properties of metal products without changing their shapes. Today finite element method is widely used to simulate lots of manufacturing processes including heat treatment and surface hardening processes, which aims to reduce the number of time- and cost-consuming experimental tryouts. In this study we tried, using this method, to simulate the full carburizing process that consists of carburizing, diffusing and quenching, and to predict the distribution of carbon contents, phase fraction and hardness, thermal deformation and other mechanical characteristics as the results. In the finite element analysis deformation, heat transfer, phase transformation and diffusion effects are taken into consideration. The carburizing process of a lock gear, a part of the car seat recliner, that is manufactured by the fine blanking process is adopted as the analysis model. The numerical results are discussed and partly compared with experimental data. And a combination of process parameters that is expected to give the highest surface hardness is proposed on the basis of this discussion.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.111-111
• /
• 2016

Two step PEO ceramic coatings were formed on AZ91 magnesium alloy in $ZrO_2$ nanoparticles and $K_2ZrF_6$ based colloidal electrolyte solution for various voltages. Surface and layers tructure of the coatings was analyzed using SEM (ScanningElectronMicroscope). Structure analysis revealed that surface of the coating was transferred from individual pancake or craters-based structure to cluster-based structure with increasing the voltage of the secondary step process. Further, it was confirmed that the cluster zone was richin Zr-based complexes and formed due to high intensives parks. Increase in the Zr contents as discovered from the EDS analysis confirmed the rise in amorphous form of the Zr-based species, which justified the results of XRD where no increase in the intensity of Zr-based species was observed with increase in voltage. Potentiodynamic polarizariotion and impedance spectroscopy techniques were used to evaluate the corrosion performance of the coatings. The highest corrosion resistance was found for coatings prepared at 240V. The same specimen was found having highest and uniform vickers hardness ~1070.5 HV. The superior mechanical and electrochemical properties of the said coating can be attributed to the defect-less microstructure and the optimal role of $ZrO_2$ nanoparticles in the secondary PEO process at 240V.

• Carbon letters
• /
• v.7 no.1
• /
• pp.34-41
• /
• 2006

The objective of this paper is to compare the variation of surface properties by hydrochloric acid pre-treatment and of metallic potassium and their salts loading effect for activated carbon after surfaces transformation by acid. From the results of nitrogen adsorption, each isotherm shows a distinct knee band, which is closely related to the characteristic of microporous carbons with capillary condensation in micropores. In order to present the causes of the differences in surface properties and $S_{BET}$ after the samples were treated with hydrochloric acid, pore structure and surface morphology are investigated by adsorption analysis. X-ray diffraction (XRD) patterns indicate that activated carbons show better performance for metallic potassium and potassium salts by pre-treatment with hydrochloric acid. Scanning electron microscopy (SEM) pictures of potassium/activated carbon particles provide information about the homogeneous distribution of metal or metal complex on the surface. For the chemical composition microanalysis for potassium treatment of the activated carbon pre-treated with hydrochloric acid, samples were analyzed by energy disperse X-ray (EDX). Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm. A positive influence of the acidic groups on the carbon surface by acid treatment is also demonstrated by an increase in the contents of potassium salts with increasing of acidic groups calculated from Boehm titration.

• Journal of the Korea Furniture Society
• /
• v.22 no.4
• /
• pp.308-316
• /
• 2011

The purpose of this study, which has been conducted as a government and academic joint project, is to introduce the design, production and installation of the structures exhibited to let people know the meaning the environment-friendly eco-park - Haneul Park that is located in Mapo-gu, Seoul. The exhibition was held as a part of Green Garden Panorama of Seoul Design Fair 2010 and used the stands of Jamsil Sports Complex as the exhibition space. The key contents of the exhibition consist of four elements; firstly, green plants were placed on the first and second floor stands of the complex in order to create the space inside the main stadium as a space that symbolized green environment. Secondly, the usability of the containers of food was maximized to attract the spectator's interest and induce desire to have it. Thirdly, the efforts of the Mapo-gu office for green environment were emphasized using environment-friendly materials. The process and meaning of the transformation of Nanji Island that had been a waste dump site in the past into Haneul Park - an environment-friendly eco-park were expressed by a four-stage space structure. The majority of installations placed in each stage were sold to visitors during the event so as to minimize the generation of wastes after the event.

• Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2005

Electro-thermal production of white phosphorus(WP, P4) generates substantial amount of highly toxic phossy water and sludges. Because of their high phosphorus contents and lack of reliable processing technology, large tonnages of these hazardous wastes have accumulated from current and past operations in the United States. In this study, two different methods for treatment of phosphorus sludge were investigated. These were bulk removal of WP by physical separation(froth flotation) and transformation of WP to oxyphosphorus compounds by air oxidation in the sludge medium. Kerosene, among other collectors, resulted in selective flotation of WP from the associated mineral gangue. Solvent action of kerosene occurring on the WP surface(by rendering WP particles hydrophobic) might produce the high selectivity of WP. The WP recovery in the froth was 79.3% from a sludge assaying 34.2% of WP. In the oxidation study, air gas was dispersed in the sludge medium by the rapid rotation of the impeller blades. The high level of sludge agitation intensity caused a fast completion of the oxidation reactions and it resulted in the high percentage conversion of WP to PO4-3 with PO3-3 making up almost all portion of oxyphosphorus compounds. The WP analysis on the treated sludge showed that supernatant solution and solid residue contained an average of 4.2 μg/L and 143 ppm respectively from the sludge containing about 26 g of WP. Further investigation will be required on operational factors to better understand the processes and achieve an optimum condition.