• Journal of the Korean institute of surface engineering
• /
• v.20 no.2
• /
• pp.49-59
• /
• 1987

The properties of $Cr_2O_3-Al_2O_3-SiO_2$ composite oxide coatings on steel surface were investigated. The results obtained were as follows: The microhardness of oxide coating layer increased with increasing heat-treatment temperature and $Cr_2O_3$ content in coating layer. The hardness showed the highest value (850Hv) treated at 700$^{\circ}C$ for $SiO_2:Al_2O_3:Cr_2O_3$=1:1:4. Increasing heat-treatment temperature, corrosion current density became lower and coating layer became denser. The corrosion current density showed the lowest value $(6.5{\times}10^{-5}\;Acm^2)$ treated at 750$^{\circ}C\;for\;SiO_2:Al_2O_3:Cr_2O_3$=1:1:3. These results were explained by protective layer which was formed during heat-treatment. The bonding between matrix and coating layer is expected to be made mechanically and chemically by the inter diffusion of Ni and Fe. The composite oxide coating was formed by softening of the binder with increasing heat-treatment temperature. The strengthening of coating layer is to be resulted from the dispersion of major oxide particles.

• Ocean and Polar Research
• /
• v.33 no.1
• /
• pp.35-43
• /
• 2011

Blubber plays different biological roles in cetaceans, including structural support, physiological demands (thermoregulation, streamlining, buoyancy, etc.), and energy storage. As such, biochemical composition, especially lipid, in the blubber may be vertically stratified in order to effectively assist with these functions. We analysed lipid content, class and fatty acid composition in the blubber of by-catch minke whale (Balaenoptera acutorostrata; n = 11), long-beaked common dolphin (Delphinus capensis; n = 3) and Pacific white-sided dolphin (Lagenorhynchus obiquidens; n = 2) from Korean waters. Lipid content for all three species ranged from 55 to 96% of wet weight, with a dominance of triacylglycerols. Vertical stratification of blubber lipid content was different between species. For minke whale and longbeaked common dolphin, it increased from inner (near the muscle) to outer (near the skin) layer, whereas it decreased for Pacific white-sided dolphin. Thirty-one fatty acids were found in all blubber samples and vertical stratification of fatty acid composition was similar among all three species. Among grouped fatty acids, monounsaturates were the most abundant, gradually increasing from inner to outer blubber layer, whereas polyunsaturates and saturates decreased. Such vertical stratification of lipid content and composition suggests that the modification and accumulation of lipid occur in the blubber itself in order to help cetaceans with their specific physiological needs.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.103-112
• /
• 2005

Water content of sub-layer in pavement systems has a large effect on pavement performance. Many researchers lately make use of time-domain reflectometry(TDR) probes to measure the soil water content of sub-layer from field monitoring. The laboratory calibration test of TDR probe should be performed with soil field, because TDR probe can cause an error by type, gradation, density, and temperature of soil. This study performed the laboratory calibration test of TDR probe(CS616) with subgrade and subbase material in long term pavement performance(LTPP) sections. And the calibration equations of TDR probe(CS616) were then proposed. It was confirmed from the study that the data of TDR probe monitored in field could be used to estimate the freezing, unfrozen water content, and matric suction of soil.

• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.426-434
• /
• 2020

The performance characteristics of a lead acid battery are investigated with the content of Sodium Perborate Tetrahydrate (SPT, NaBO₃·4H₂O) in a positive plate active material. SPT, which reacts with water to form hydrogen peroxide, is applied as an additive in the positive plate active material to increase adhesion between the substrate (positive plate) and the active material; this phenomenon is caused by a chemical reaction on the surface of substrate. A positive plate with the increasing content of SPT is prepared to compare its properties. It is confirmed that the oxide layer increases at the interface between the substrate and the active material with increasing content of SPT; this is proven to be an oxide layer through EDS analysis. Battery performance is confirmed: when SPT content is 2.0 wt%, the charging acceptance and high rate discharge properties are improved. In addition, the lifetime performance according to the Standard of Battery Association of Japan (SBA) S0101 test is improved with increasing content of SPT.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.188-193
• /
• 2021

In this study, the moisture content of the face skin was changed according to the number of skin applications for female college students under 25 years of age. Moisture contents were measured using a skin moisture meter (skin oil and moisture meter, PRC, China). Skin used 500ml of Innisfree's blueberry rebalancing skin as a clinical trial material. Both the forehead, eyes, cheeks, and chin had a higher moisture content after one layer of application than before and after one layer of application, and after ten layers of application, it can be seen that the moisture content is higher. As a result, when applying basic products after washing your face, the first step is to increase the number of skins, and then apply basic products such as lotion and moisturizing cream to increase the moisture content.

• Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.17-23
• /
• 2021

Background: Montane wetlands are unique wetland ecosystems with distinct physicochemical characteristics, and Molinia japonica often makes dominant communities in montane wetlands in South Korea. In order to figure out the environmental characteristics of M. japonica habitats and the major factors for the growth of M. japonica, field surveys were conducted in five wetlands from September to October 2019. Also, soil was collected at every quadrats installed in surveyed wetlands to analyze the physicochemical features. Results: The relative coverage of M. japonica was higher in low latitude wetlands than in high latitude. Redundancy analysis showed that soil water content had the strongest effect on the growth of M. japonica (F = 23.0, p < 0.001). Soil water content, loss on ignition, and relative light intensity showed a high correlation with the density (R = 0.568, 0.550, 0.547, respectively, p < 0.01) and the coverage of M. japonica (R = 0.495, 0.385, 0.514, respectively, p < 0.01). Soil water content, loss on ignition, and pH were highly correlated with each other. Conclusions: Molinia japonica lives in acidic wetlands at high altitude in temperate zone of low latitude, with peat layer placed on the floor. Also, M. japonica prefers open spaces to secure enough light for photosynthesis. High shoot production of M. japonica resulted in adding new peat material in every year, and this layer enforces the environmental characteristics of M. japonica habitats. This study may provide insights for further understanding of the method how wetlands maintain acidic condition by itself in montane wetlands in temperate zone.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.1
• /
• pp.21-26
• /
• 1976

The study was carried out to investigate the variations in the fibroin hydrolysis of different cocoon shell layers, and the relationship between the hydrolysis and silk physical property. The obtained results are as follows: 1. The fibroin hydrolyzing ratio was highest at the inner layer of cocoon shell and. next in order. at the middle layer and at the outer layer. 2. The fibroin hydrolyzing ratio of abnormal cocoons was higher than normal cocoon and it was different among them, tile highest was double coroon, thin shell cocoon and perforated cocoon in order. 3. The sericin content and fibroin hydrolyzing ratio of Jam 111 and Jam 112 was higher than that of Jam 111 $\times$ Jam 112. 4. The fibroin hydroiyzing ratio of the cocoons fed with the artificial diets was increased at the inner layer. The sericin content of those lessened at the inner layer, however, it slightly increased at the most inner layer more than at the inner layer. 5. The breaking strength of the degummed silk fiber of different cocoon layers was reduced at the inner layer. The breaking Strength of abnormal silk fiber was less than that of normal silk fiber. 6. A negative correlation (r= －0.8) )was approved between fibroin hydrolyzing ratio and breaking strength of silk fiber, and the regression line was Y=－0.29x＋5.07.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.583-596
• /
• 2022

The rock surface of Bangudae petroglyphs is mainly dark brown hornfelsified shales by contact metamorphism. The surface form a weathered layer of a invariable depth, and there is a difference with mineral and chemical composition between weathered and non-weathered layers. Surface of the petroglyphs has been discolored to light brown over the face due to biological and chemical weathering. As the measuring chromaticity based on the non-weathered layer, the whiteness and yellowness increased in the weathered layer, and the color difference (ΔE) was 5.54 to 36.89 (mean 17.26). In the weathered layer of the petroglyph surface, the CaO content was reduced by about 90% compared to the non-weathered layer, and Sr also showed the same trend. In particular, the mean porosity of the non-weathered layer was 0.4%, but it was estimated as 25.0% in the weathered layer. This is interpreted as the fact that calcite reacts with water, and forms a weathered layer from the surface as it is eluted. Based on the weathering depth modeling of the petroglyphs using the penetration characteristics of X-rays, the weathering depth of rock faces was found to be 1 to 2mm. However, the area classified as 2mm or more estimated to be a maximum of 3 to 4mm, considering the weathering depth around the petroglyphs surface.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.656-661
• /
• 2008

basic formulation. Moisture content of 13.72%, crude protein 5.22%, crude lipid 1.31%, crud ash 1.94%, respectively. The pH of yellow layer cake decreased with increasing mandarin powder concentrations. In color values, with increase of mandarin powder concentration. The volume decreased with increasing mandarin powder concentration. The weights of yellow layer cake increased with increasing mandarin powder concentration. L value and a value decreased with increasing mandarin powder concentration in the crumb. b value increased with increasing mandarin powder concentration. The baking loss rate decreased with increasing mandarin powder. In the texture hardness, gumminess, chewiness and adhesiveness of yellow layer cakes significantly increased with increasing mandarin powder concentration. springiness and cohesiveness of yellow layer cakes significantly decreased. In the results of sensory evaluation, when compared to the control, the bread added to 9% of mandarin powder was superior to in color and flavor, while was similar to texture and taste.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.637-645
• /
• 1991

Physicochemical factors affecting cooking and eating quality of rice and their mechanisms were investigated. The stickiness of cooked rice was negatively correlated with amylose content(r=0.58, p<0.05) and protein content(r=-0.72, p<0.01), but not affected by crude fat content of rice. The ultrastructure of cooked rice grain showed the progressive gelatinization of starch from the periphery toward the center of the endosperm as water and heat energy diffused into. The rate of water diffusion appears to be dependent on the cell arrangement in the endosperm and the protein content of milled rice. Once water and heat reach the starch granules, the rate of in situ gelatinization of starches appears to be dependent on their own gelatinization temperature range and amylose content. Protein acts as a barrier for the swelling of starch and water diffusion in two ways : 1) by encasing starch granules in the starchy endosperm, and 2) by forming a barrier between the subaleurone layer and the starchy endosperm. Therefore, the separation and fragmentation of the outermost layers of the endosperm occurred more easily in the low-protein content rices, and was associated with increases of solids lost in cooking-water at 95$^{\circ}C$ and stickiness of cooked rice.