• Journal of Korea Foundry Society
• /
• v.25 no.4
• /
• pp.161-167
• /
• 2005

The experiment of hot dip interaction tests was carried out in order to study the formation behavior of interfacial reaction layer between as-received STD61 hot work tool steel and a commercial pure aluminum melt, Al-xwt.%Fe(x=0.2, 0.5, 0.8 and 1.1) alloys melt and Al-xwt.%Si(x=1.0, 4.0, 7.0 and 10.0) alloys melt, respectively. The results show that the reaction layer, over 300 ${\mu}m$ in thickness, is easily formed by the dissolution of silicon from as-received tool steel. When the iron content in the aluminum alloy is higher than 1.1 wt.%, the thickness of reaction layer decreases below 180 ${\mu}m$ by preventing iron dissolution from the tool steel. The silicon dissolved from tool steel acts as a strong promoter on the formation of reaction layer, but the alloyed silicon in molten aluminum alloys acts as an inhibitor on the formation of reaction layer.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.1
• /
• pp.8-16
• /
• 2001

The effects of gas composition, pressure, temperature and time on the case thickness, hardness and nitride formation in the surface of tool steels(STD11 and STD61) have been studied by micro-pulse plasma nitriding. External compound layer and internal diffusion layer and the diffusion layer were observed in the nitrided case of tool steels. The relative amounts and kind of phases formed in the nitrided case changed with the change of nitriding conditions. Generally, only nitride phases such as ${\gamma}(Fe_4N)$, ${\varepsilon}(Fe_{2-3}N)$, or $Cr_{1.75}V_{0.25}N_2$ phases were detected in the compound layer, while nitride and carbide phases such as ${\varepsilon}-nitride(Fe_{2-3}N)$, $(Cr,Fe)_{\gamma}C_3$ or $Fe_3C$ were detected in the diffusion layer by XRD analysis. The thickness of compound layer increased with the increase of nitrogen content in the gas composition. Maximum case depth was obtained at gas pressure of 200Pa.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.257-263
• /
• 1998

Fifteen varieties of Oryza sativa mainly includig those of Korean native rice were exactly cutted into three layers such as L$_1$ layer (the outer part of 90% from rice center), L$_2$ layer(the part of 81 ~ 91% from the rice center) and L$_3$ layer(the inner part of 80% from the rice center) and ferulic acid derivatives, which play an important role of antioxidative action, were quantitiavely analyzed by UV absorption spectrometric method at fixed 314nm. From this experiment, it was found that the more it enters from the surface into the rice center, the more those secondary metabolites contents were highly reduced. The varieties showing contents more than 20 mg/g were as follows: Hwasunchalbyeo(25.8mg/g), Jojeongdo(24.1mg/g), Suwon425(21.2mg/g), Daigolbyeo(20.6mg/g) and Nonglimna 1(20.2mg/g) by this order. Estimation onthe anthocyanin contents of both Suwon 425 and Sanghehanghyeolna revealed that its total. contents were very exactly close each other. However, it was charateristically differentiated in the contents of L$_2$ layer with respect to showing a considerably higher content of Suwon 425 than of Sanghaehanghyeolna. Conclusively, the selected Suwon 425 variety, which is coloured and flavour volatile one, showed relatively higher contents of anthocyanin, ferulic acid derivatives in the L$_2$ layer as well as L$_1$ layer when compared with Sanghaehangyeolna and even other varieties. This fact suggested that Suwon 425 could be a promising candidate for the development of health rice food.

• Journal of Conservation Science
• /
• v.29 no.3
• /
• pp.209-221
• /
• 2013

This study is to interpret the construction characteristics and the provenance of soil layers from the Dongnamri site in Baekje Kingdom of Buyeo, Korea. The soil layers is divided into present age layer, Baekje layer and lower part layer, and the soils formed in the Baekje Kingdom period is divided into the Baekje 1st layer and the Baekje 2nd layer according to temporal intervals. The soil layers gradually becomes darker in color and higher in mineral content towards the lower part layer. However, the particular distinction between layers of the soils could not be identified. Additionally, the soil layers show a similar characteristics of mineralogy and geochemical evolution regardless of the layers. This indicates that the sites were made with weathered soil from an identical bed rock, and the site show a similarity to the surrounding soil, indicating its possibility of being the original materials. However, through the analysis of particle size, the first and second Baekje layers occurred that these layers were formed by setting up the soil with high content of sand on the bottom and stacking the soil with high content of silt on top of it.

• Electrical & Electronic Materials
• /
• v.16 no.9
• /
• pp.62.2-62
• /
• 2003

Material Characteristics of zirconium oxide thin films obtained by plasma enhanced chemical vapor deposition on p-type Si(100) substrates were investigated to explain their unable electrical properties. The films obtained without heating had polycrystalline nanograins that are mostly of a tetragonal phase under oxygen-deficient plasma conditions but transformed into a monoclinic phase with increasing $O_2$ addition in the plasma. Mostly amorphous bulk $ZrO_2$ with a relatively thicker and smoother interfacial layer was obtained from oxygen-rich plasmas, resulting in a decrease in both the overall dielectric constant and the leakage current density. the interfacial layer formed between the bulk $ZrO_2$ and Si substrate was analyzed to be zirconium silicate, which approached $SiO_2$ as its zirconium content decreased with the increasing gas phase $O_2$ content.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.461-469
• /
• 1987

Single crystals of Mn-Zn Ferrite were grown by slow cooling method using Na2B4O7 as flux agent. The effects of flux content and cooling rate on the types of crystals, and the relation between supersaturation and growth mechanism were studied. As a result, the types of grown crystals occurred as plate, hopper and octahedral crystals. The occurrence of these crystal types was dependent on flux content. The habit was found to correlate with the growth rate and supersaturation. The lateral growth of a dendritic crystal is related to the twin layer. The growth of crystals from borax melts mainly occurred by the layer-spreading growth following corner and edge nucleation caused by high supersaturation in the melt. Especially, the plate crystals were produced on top of the melts. The hopper and octahedral crystals occurred at lower supersaturation than the plate crystals.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.733-736
• /
• 1998

In this paper, we propose a new method for content-based retrieval system using wavelet transform and correlation, which has were used in signal processing and image compressing. The matching method is used not perfect matching but similar matching. Used feature vector is the lowest frequency(LL) itself, energy value, and edge information of 4-layer, after computng a 4-layer 2-D fast wavelet transform on image. By the proosed algorithm, we got the result that was faste rand more accurate than the traditional algorithm. Because used feature vector was compressed 256:1 over original image, retrieval speed was highly improved. By using correlation, moving object with size variation was reterieved without additional feature information.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.571-575
• /
• 1996

An experiment was conducted to measure the true metabolizable energy (TME) values of seven major poultry feed ingredients, two feed concentrates and one randomly collected layer mixed feed prepared from the available feed ingredients. The results of this study were the most thorough evaluation of the TME content of some selected common feed ingredients of Bangladesh. The observed TME values of some feed ingredients were very close to the values of different origins of feed ingredients. But the TME values measured in mixed layer feed were very low which could not support the standard requirement of laying birds. There values will be of assistance in describing the energy content of the most common available feed ingredients of Bangladesh.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.889-893
• /
• 2007

The demand of quality green banana chips is increasing in the world snacks market, therefore, the preparation of quality chips and their subsequent shelf life in packaging were evaluated in this study. Banana slices were fried in hot oil to the desired moisture content (2-3%) and oil content (40%) in chips at 3 different temperatures, and the impact of different pretreatments were compared by sensory assessment. A linear relationship between time and temperature was used to achieve the optimal processing conditions. Banana slices fried at the lower temperature of $145^{\circ}C$ took longer to reach the desired chip qualities, but gave the best results in terms of color and texture. Blanching was the most effective pre-treatment for retaining the light yellow color in finished chips. For extending the shelf life of chips, moisture proof packaging in double layer high density polyethylene was more effective than single layer low density polyethylene.

• Journal of the Korean Ceramic Society
• /
• v.26 no.4
• /
• pp.487-492
• /
• 1989

The microstructure and electrical properties of ZnO-Bi2O3 system with Bi2O3(0.5~5mol%) content have been investigated in relatin to sintering temperature and atmosphere. The grain size of ZnO increases sharply with Bi2O3(0.5~5mol%) content, but over 0.5mol% Bi2O3 increased less rapidly when sintered at 120$0^{\circ}C$. Electrical characteristics varied with sintering atmosphere and air-sintered conditions showed comparatively lower nonlinear exponents than the double-crucible conditions. Calculated barrier voltage was about 1.7V.