• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.767-774
• /
• 2015

In recent decades, health concerns related to sodium intake have caused an increased demand for salt or sodium-reduced foods. Umami substance can enhance taste sensitivity to NaCl and may offer a unique approach to replace and reduce the sodium content in foods. In this study, hot water extraction conditions of Wando sea tangle with high umami taste were investigated. Wando sea tangle harvested in June was selected for hot water extraction based on its free amino acids composition. The quality properties of sea tangle extract were investigated at various extraction temperatures ($60^{\circ}C$, $80^{\circ}C$, and $100^{\circ}C$) and times (1 h, 2 h, and 3 h). Sea tangle extracts at the extraction temperature of $100^{\circ}C$ contained the highest soluble solids (35.47%~36.93%), and crude protein (3.75%~4.00%). Viscosities of sea tangle extracts decreased with increasing extraction temperature. Umami amino acids (glutamic acid and aspartic acid) and sensory characteristics were best at extraction conditions of $100^{\circ}C$ for 2 h. Saltiness enhancement of sea tangle extract powder was determined. Saltiness intensities of NaCl solution after adding 1% sea tangle extract powder were enhanced (1.84~4.25-fold). At the same saltiness intensity, sodium contents of NaCl solution with 1% sea tangle extract powder were 12.24~24.33% lower than that of NaCl solution. These results suggest that it is possible to reduce sodium in foods with sea tangle extract as a natural salt enhancer without lowering overall taste intensity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.79-114
• /
• 1974

Experiments were conducted to clarify the variations of the ecological characteristics under different day-length and temperature conditions inperilla varieties from 1972 to 1973 in the experimental fields of Crop Experiment Station, O.R.D, Suwon. Thirty-six varieties were tested in the field in 1972 under 6 growing seasons differing seeding dates. from April 5th to June 20th with 15-day interval between each seeding. Pot-experiment also were conducted in 1972 and 1973. The seeds of the 6 varieties tested were sown on May 25th. In this pot-experiment natural condition was regarded as a short-day treatment and 100-W incandescent lamps were used for long-day treatment. Three selected varieties were grown under different. temperature treatments in phytotron in Crop Experiment Station. The results obtained are summarized as follows: 1. Most varieties tested flowered around September 6. The days required to flower were shortened gradually as the planting time was delayed. 2. The varieties used were matured around October 6, but the maturity was shortened when planted early. The days required for maturity after flowering was 26 to 30. 3. The growing period was also shortened gradually when planting time was delayed. 4. Plant height was reduced when planting time was delayed. 5. There were little differences in number of valid branches among planting time I, II and III, while the branch number was reduced as the planting time was delayed. 6. The dry matter weight was gradually increased from planting time I to III, while it was rapidly decreased after planting time IV. 7. It was found that the flowering of perilla was little affected by temperature. The varieties, however, were more sensitive to day-length. 8. No clear tendency was found in the plant height, number of valid branches and dry matter weight by the time and period of day-length and temperature treatments. 9. The highest yield was obtained at planting time III(May 5th) and the yield was decreased at either earlier or later planting. 10. 1, 000 grain weight appeared to be heavier as the planting time was delayed. 11. The number of flower cluster was largest at planting time III (May 5th) and it was decreased as planting time was earlier or later than III. 12. The oil content was also highest at planting time III (May 5th). 13. Days to flowering, days to maturity and total growing period and flowering period did not affect the yield much. 14. The number of valid branches, flower clusters, 1, 000-grain weight and dry matter weight were positively correlated with yield. The relationship between these characters and yield were variable depending upon the planting time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.47-68
• /
• 1970

Experiments were conducted by moderate season culture of each of 7 early, medium and late maturing varieties which were considered to be of strong salt tolerance in non-salty, low- and high-salty reclaimed areas (salt content: 0.5% and 1% at the end of April). The results of the experiments revealed that the early maturing varieties were suffered greatly from salt damage in such reclaimed salty area which is the "fall better type" in the year-round changes of soil salt concentration in Korea. Better yielding varieties in the salty area showed generally a high yield ratio in the salty area compared with the non-salty area. This indicates that they are strong salt tolerant varieties. It seemed that the salt tolerance could be measured by the number of delaying days in heading, the growth rate of culm length, number of panicles and number of grains per panicle in the salty area to compare with the non-salty area. The effects or salt damage on the yields of each variety at maturing stage and agronomic characteristics in the salty area were compared and discussed with the non-salty area.alty area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.257-263
• /
• 2016

Recently, an interest has developed in the use of whole green grains as functional food materials. The present study was conducted to provide the baseline data for the stable production of whole green grains in 20 cultivars of wheat by investigating the greenness of grain with maturation (from $20^{th}$ to $41^{st}$ day after heading, at an interval of 3 days). On the $20^{th}$ day after heading, the grains were dark green with a wrinkled long-oval shape. After the $35^{th}$ day of heading, the grains turned almost yellow with an oval shape. Their redness ('a' value of chromaticity) increased from the $20^{th}$ to $41^{st}$ days after heading, indicating a negative value up to the $32^{nd}$ day after heading. A significant decrease in their chlorophyll content was observed with maturation. The yield of whole green wheat grain (including greenish yellow grain) was the highest from the $32^{nd}$ to $35^{th}$ after heading. Therefore, we concluded that the optimal harvesting period for whole green wheat grain was from the $32^{nd}$ to $35^{th}$ day after heading. The heading time of various cultivars ranged from April 28 to May 5, the time of Jopummil cultivar grew the fastest among them, such as Gurumil, Alchanmil, but Dahongmil got the latest in heading time. The greenness of seven cultivars (Jeokjungmil, Keumkangmil, Jogyeongmil, Jopummil, Baekjungmil, Yeonbaekmil, and Milseongmil) was relatively higher than that of the others. The yield of greenish whole grain was relatively high in six cultivars (Alchanmil, Baekjungmil, Eunpamil, Yeonbaekmil, Dahongmil, and Urimil). Based on their greenness and yield, the Baekjungmil and Yeonbaekmil cultivars have been considered to be optimal for the production of whole green wheat grain.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.31-40
• /
• 1986

Cylindrical and conical types of grain-straw separation equipment which has a stationary crimped sieve drum with rotating inner rotor were constructed. The developed equipments were tested to investigate the characteristics of separating performance under various mechanical conditions and crop conditions. As increase of the inclination of equipment and decrease of pitch of cover vane, the grain recovery was increased while straw rejection was decreased. The grain recovery and overall efficiency were decreased as the rotor speed and feeding velocity were increased for both varieties of rice, moisture contents, and test equipments. Conical prototype equipment performed higher straw rejection, lower grain recovery, and lower power requirement. However, separation performance of conical type equipment was more widely varied with various test conditions compared to cylindrical one. The performance of both equipments showed relatively insensitive to crop feedrate and crop properties, such as variety, moisture content, and grain-to-straw ratio.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.427-434
• /
• 2010

This study was conducted to investigate the growth performance and meat quality improvement according to castration, optimal feeding management and ruminally protected amino acid-enriched fatty acid (RPAAFA) for the unselected Hanwoo bulls in the performance test. Bulls were castrated at approximately 14 months of age. Sixteen Hanwoo steers, 15 months of age and weighing $412.9{\pm}24.9kg$, were distributed into 2 groups. Steers were fed a basal diet supplemented with RPAAFA at 0 g (control) or 100 g (treatment), respectively for 12 months. Steers were slaughtered at 27 months of age. Average daily gain for treatment tended to be higher (p=0.10) than that of control, whereas feed conversion ratio tended to be lower (p=0.07) in treatment than in control. The supplementation of RPAAFA did not affect rib eye area, back fat thickness, meat color, fat color, texture and maturity. The appearance rates of yield 'A' grade and high quality grade ($1^{++}$, $1^+$ and 1) were higher in treatment than in control. The content of moisture, fat, protein and ash in longissimus muscles were similar between control and treatment. The supplementation of RPAAFA did not affect water-holding capacity, oxidation and reduction potential, myoglobin and fatty acid contents in longissimus muscles. Thus, present results indicate that castration, optimal feeding management and RPAAFA may be recommended for improving growth performance and quality grade of the unselected Hanwoo bulls in the performance test.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.56-64
• /
• 2001

Composting of livestock feces is economic and safe process to decrease the possibility of direct leakage of organic pollutants to ecosystem from commercial and environmental point of view. This study was conducted with three different experiments related to composting of livestock feces. The purpose of experiment 1 was to investigate changes of characteristic of compost pile during composting period by low temperature in cold season. To compare composting effect of experimental compost pile and control pile exposed in cold air, experimental compost piles were warmed up by hot air until their temperatures were reached at $35^{\circ}C$. Sawdust, Ricehull and Ricestraw were mixed with livestock feces as bulking agent. The highest temperatures of compost pile during composting period were in sawdust, rice hull, rice straw, and control were $75^{\circ}C$, $76^{\circ}C$, $68^{\circ}C$, $45^{\circ}C$ respectively. Moisture content, pH, C/N and volume of compost were decreased during composting period. Experiment 2 was carried out to study utilization effect of compost by plant. A corn was cultivated for 3 years on fertilized land with compost and chemical fertilizer. The amount of harvest and nutrition value of corn were analyzed. In first year of trial, the amount of harvest of corn on land treated with compost was lower by 20% than that of land treated with chemical fertilizer. In second year, there was no difference in yield of com between compost and chemical fertilizer. In third year, the yield of com on land fertilized with compost was much more than that of land fertilized with chemical fertilizer. The purpose of experiment 3 was to estimate the decrease of malodorous gas originating from livestock feces by bio-filter. Four types of bio-filters filled with saw dust, night soil, fermented compost and leaf mold were manufactured and tested. Each bio-filter achieved 87-95% $NH_3$ removal efficiency. This performance was maintained for 10 days. The highest $NH_3$ removal efficiency was achieved by leaf mold on the first day of operation period. It reduced the concentration of $NH_3$ by about 95%. Night soil and fermented compost showed nearly equal performance of 93 to 94% for 10 days from the beginning of operation. The concentration of hydrogen sulfide and methyl mercaptan originating for compost were equal to or less than $3mg/{\ell}$ and $2mg/{\ell}$, respectively. After passing throughout the bio-filter, hydrogen sulfide and methyl mercaptan were not detected.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.359-383
• /
• 2017

3,000 years ago, since the first poster of humanity appeared in Egypt, the invention of printing technique and the development of civilization have accelerated the poster production technology. In keeping with this, the expression of poster has also been developed as an attempt to express artistic sensibility in a simple arrangement of characters, and now it has become an art form that has become a domain of professional designers. However, the technological development in the expression of poster is keep staying in two-dimensional, and is dependent on printing only that it is irrelevant to the change of ICT environment based on modern multimedia. Especially, among the many kinds of posters, the style of movie posters, which are the only objects for video, are still printed on paper, and many attempts have been made so far, but the movie industry still does not consider ICT integration at all. This study started with the feature that the object of the movie poster dealt with the video and attempted to introduce the augmented reality to apply the dynamic image of the movie to the static poster. In the graduation work of the media design major of a university in Korea, the poster of each works for promoting the visual work of the students was designed and printed in the form of a commercial film poster. Among them, 6 artworks that are considered to be suitable for augmented reality were selected and augmented reality was introduced and exhibited. Content that appears matched to the poster through the mobile device is reproduced on a poster of a scene of the video, but the text informations of the original poster are kept as they are, so that is able to build a moving poster looked like a wanted from the movie "Harry Potter". In order to produce this augmented reality poster, we applied augmented reality to posters of existing commercial films produced in two different formats, and found a way to increase the characteristics of AR contents. Through this, we were able to understand poster design suitable for AR representation, and technical expression for stable operation of augmented reality can be summarized in the matching process of augmented reality contents production.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.147-175
• /
• 2016

This thesis aims to research ways for the regional balanced development of cartoon creation & production environment being centered in metropolitan area in Korean cartoon industry which has rapidly changed since 2013. As a cartoon can not only be produced with relative lower production cost comparing to those of other cultural contents industries, but also can be produced only if the minimal requirements for cartoon production is prepared, so the cartoon is a field that the decentralization can be accomplished very easily. Currently, most cartoon-relevant companies and cartoon promotion institutions are located in Seoul an Bucheon, etc. However, cartoon artists live nationwide, and even cartoon artists producing their works abroad are reached to a significant number. In some regions like Daejeon, Busan, Suncheon and Gyeongbuk (Gyeongsangbuk-do), there have been appeared full-scale movement to construct regional cartoon creation & production centers since 2015. This thesis aimed to investigate each region's movement to construct cartoon creation & production center with oversea cases, and to check how such movement could be balanced and harmonized with each region's unique features. First of all, this thesis analyzed the status quo of government's policy nurturing the cartoon industry. Korean government's cartoon-promotion policy around the axis of the Cartoon Industry's Mid.Long-Term Development Plan has been developed around the Korea Creative Content Agency and the Korea Manwha(cartoon) Contents Agency in Bucheon, but as the webtoon industry has rapidly grown up, the necessity for building a cartoon promotion institution in each region has been raised since 2015. With the establishment of 4th Cartoon Industry Mid.Long-Term Development Plan to be executed from 2019, it seems that full-scaled support framework for cartoon regional balanced development should be occupied. For the case of foreign countries, cartoon promotion institutions and relevant events have been developed around regions from early times like San-Diego, USA(Comicon), Angouleme, France(National Image Center), Kyoto (Cartoon Museum), Sakaiminato(Misuki Sigeru Road), Japan gave a lot of implications. In the section of conclusion, this study aimed to suggest the importance of and necessity for establishing a cartoon creation & production center in each region appropriately for the region's identity and characteristics with specific plans. Based on that, this thesis aimed to suggest a vision for cartoon & webtoon industry that regional creation & production system can be settled almost only in the cultural contents industry.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.