• Journal of The Korean Association For Science Education
• /
• v.42 no.1
• /
• pp.1-18
• /
• 2022

The two most influential rationales for the 21^st century science curriculum reform can be said to be core competence and scientific literacy. However, the relationship between the two has not been scrutinized but remained speculative - and this has made the harmonization of the general guideline and subject-matter curriculum difficult in Korean national curriculum system. This study compares the two discourses to derive implications for future science curriculum development. This study took a literature research approach. In chapter II, national curriculum or standards, position papers, and research articles were reviewed to delineate the historical development of the discourses. In chapter III and IV, the intersections of those two discourses are delineated. In chapter III, the commonalities of the two discourses are explicated with regard to crisis rhetoric, multi-faceted meanings (individual, community, and global aspects), organization of subject-matter content and teaching and learning method, and the role of high-stake exams. In chapter IV, their respective strengths and weaknesses are juxtaposed. In chapter V, it is suggested that understanding scientific literacy and core competence discourses to have a family resemblance as 21^st century science curriculum reform rationale, after Wittgenstein and Kuhn. Finally, the ways to resolve the conflict between the two ideas from the general guideline and subject-matter curriculum over crisis rhetoric were explored.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1994.09a
• /
• pp.29-39
• /
• 1994

Serious issues about the changes in the environmental conditions on earth associated with human activities have arisen, and the interest in these problems has increased. It is urgent to determine how the expansion of terrestrial UV-B radiation due to the stratospheric ozone depletion influences living matters. In this connection, we have been investigating the effects of UV-B radiation on the growth of rice cultivars (Oryza sativa L.). We report here some physiological and genetic aspects of resistance to inhibitory effects of UV-B radiation on growth of rice cultivars as described below. Elevated UV radiation containing large amount of UV-B and a small amount of UV-C inhibited the development of plant height, the photosynthetic rate and the chlorophyll content in rice plants in a phytotron. Similar results were obtained in experiments, in which elevated UV-V radiation. Similar results were obtained in experiments, in which elevated UV-B radiation (transmission down to 290 nm) was applied instead of UV-B radiation containing a small amount of UV-C. The inhibitory effects of UV radiation was alleviated by the elevated CO2 atmospheric environment or by the exposure to the high irradiance visible radiation. The latter suggested the possibility that the resistance to the effects of UV radiation was either due to a lower sensitivity to UV radiation or to a greater ability to recover from the injury caused by UV radiation through the exposure to visible radiation. The examination of cultivar differences in the resistance to UV radiation-caused injuries among 198 rice cultivars belonging to 5 Asian rice ecotypes (aus, aman, boro, bulu and tjeleh) from the Bengal region and Indonesia and to Japanese lowland and upland rice groups showed the following: Various cultivars having different sensitivities to the effects of UV radiation were involved in the same ecotype and the same group, and that the Japanese lowland rice group and the boro ecotype were more resistant. Among Japanese lowland rice cultivars, Sasanishiki (one of the leading varieties in Japan) exhibited more resistance to UV rakiation, while Norin 1 showed less resistance, although these two cultivars are closely related. It was thus indicated that the resistance to the inhibitory effects of UV radiation of rice cultivars is not simply due to the difference in the geographical situation where rice cultuvars are cultivated. Form the genetic analysis of resistance to the inhibitory effects of UV radiation on growth of rice using F2 plants generated by reciprocally crossing Sasanishiki and Norin 1 and F3 lines generated by self-fertilizing F2 plants, it was evident that the resistance to the inhibitory of elebated UV radiation in these rice plants was controlled by recessive polygenes.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1251-1251
• /
• 2001

The routine analysis of milk chemical components is of major importance both for the management of animals in dairy farms and for quality control in dairy industries. NIRS technology is an analytical technique which greatly simplifies this routine. One of the most critical aspects in NIRS analysis of milk is sample preparation and analysis modes which should be fast and straightforward. An important difficulty when obtaining NIR spectra of milk is the high water content (80 to 90%) of this product, since water absorbs most of the infrared radiation, and, therefore, limits the accuracy of calibrating for other constituents. To avoid this problem, the DESIR system was set up. Other ways of radiation-sample interaction adapted for liquids or semi-liquids exist, which are practically instantaneous and with limited or null necessity of sample preparation: Transmission and Folded Transmission or Transflectance. The objective of the present work is to compare the precision and accuracy of milk calibration equations in two analysis modes: Reflectance (dry milk) and Folded Transmission (liquid milk). A FOSS-NIR Systems 6500 I spectrophotometer (400-2500 nm) provided with a spinning module was used. Two NIR spectroscopic methods for milk analysis were compared: a) folded transmission: liquid milk samples in a 0.1 pathlength sample cell (ref. IH-0345) and b) reflectance: dried milk samples in glass fibre filters placed in a standard ring cell. A set of 101 milk samples was used to develop the calibration equations, for the two NIR analysis modes, to predict casein, protein, fat and dry matter contents, and 48 milk samples to predict Somatic Cell Count (SCC). The calibrations obtained for protein, fat and dry matter have an excellent quantitative prediction power, since they present $r^2$ values higher than 0.9. The $r^2$ values are slightly lower for casein and SCC (0.88 and 0.89 respectively), but they still are sufficiently high. The accuracy of casein, protein and SCC equations is not affected by the analysis modes, since their ETVC values are very similar in reflectance and folded transmission (0.19% vs 0.21%; 0.16% vs 0.19% and 55.57% vs 53.11% respectively), Lower SECV values were obtained for the prediction of fat and dry matter with the folded transmission equations (0.14% and 0.25% respectively) compared to the results with the reflectance ones (0.43% and 0.34% respectively). In terms of accuracy and speed of analytical response, NIRS analysis of liquid milk is recommended (folded transmission), since the drying procedure takes 24 hours. However, both analysis modes offer satisfactory results.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.23-37
• /
• 2022

Based on the service scenario proposed by the existing Kim Tae-wan (2018) who can safely evacuate inmates with the help of a mobile application linked to a fire detection system in the event of a fire, the final purpose of this study is to develop the scenario by incorporating more realistic scenarios with mobile stimuli that can help them escape or act through the Delph In addition, to make the scenarios produced more realistic considering the structure and copper lines of a typical building, expert scenario verification and Delphi technique were applied to exclude unnecessary or impractical aspects of the existing scenarios. The results of the second Delphi survey showed that the primary psychology that could be seen at the time of the fire alarm were doubts, safety concerns and alarm, and the results of the second Delphi survey were analyzed, and the satisfaction of the content adequacy (CVR), convergence, and consensus was derived. Finally, this was applied to create a scenario in which a mobile application was assisted to evacuate the fire response phase. This study will allow the use of methods to increase the evacuation rate of those who are in the event of a fire.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Clean Technology
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2023

Mongolia is experiencing some of the world's most serious air pollution problems. The air pollution is especially severe during the winter when raw coal and low-grade fuels are used to heat homes in Ger villages. The impact of this pollution has created significant health and socioeconomic challenges for the country. In order to mitigate this air pollution, this study analyzed the fuel quality of the low-grade fuels and Mongolian waste cooking oils used in Ulaanbaatar, Mongolia. Then the environmental characteristics of traditional stove combustion and a prototype combustion heating device were compared and analyzed. In addition, the effect of replacing the heating devices was evaluated by analyzing their risks to humans. Analysis of the fuel characteristics showed that briquettes had relatively low environmental properties as a result of their high ash, N and S content. Also, after analyzing the combustion characteristics, it was found that the air quality improvement effect was higher when waste cooking oil was burned compared to the three types of coal that were analyzed. Finally, this study evaluated the impact of replacing the Mongolia traditional stove with a prototype stove that uses waste cooking oil. The results of this study are expected to help to mitigate the air quality problems currently observed in Ulaanbaatar, Mongolia.

• Journal of Science Education
• /
• v.47 no.1
• /
• pp.11-23
• /
• 2023

In this study, we examined the effect of socioscientific issue (SSI) based science lessons on underachieving 9th-grade students. A total of seven lessons centered on two SSIs related to the national science curriculum were developed and implemented during the first semester of 2021. Data were collected from 185 9th-grade students in one middle school in a mid-sized city of South Korea. Among them, 37 were identified as achieving far below the standards (underachieving students hereafter). Quantitative data were collected from pre- and post-tests on basic science content and attitudes and competency measures. To supplement quantitative data, lesson observation notes were recorded, and student interviews with a selected number of students were conducted. The analysis of quantitative data was conducted through the Wilcoxon Signed Rank Test and paired t-tests. Qualitative data were analyzed to find reasons for changing attitudes. The findings showed that the SSI-based lessons were more effective on underachieving students than the others in enhancing basic academic achievement, while there was no significant effect on all in attitudes and competency. Lesson observation data showed that underachieving students were more engaged in SSI-based lessons than before. Student interviews demonstrated several reasons why they were engaged, suggesting the aspects of SSI-based lessons that facilitated underachieving students' learning. Further research topics are suggested.

• Journal of The Korean Association For Science Education
• /
• v.43 no.2
• /
• pp.59-72
• /
• 2023

This study analyzed a group interview with six earth science teachers and eight middle school students to find out the evaluations and criteria they use to evaluate VR/AR contents (two virtual reality content and two augmented reality contents) in middle school science digital textbook. The study found the VR/AR contents were evaluated on four criteria as follows: VR/AR media characteristics; technical operation; user interface; and teaching-learning design. The evaluations can be summarized by each criterion. First, regarding VR/AR media characteristics, interesting features of VR/AR contents were considered relatively advantageous compared to other media like videos. However, its shortage of visual presence and inconvenience of using markers were mentioned as shortcomings. Second, in the technical operation criteria, teachers and students found the following conditions as technically challenging: failing to properly operate on a particular OS; huge volumes of contents in the application; and frequent freezing when using the application. Third, poor intuitiveness and lack of flexibility were found as negative aspects in user interface. Fourth, regarding teaching-learning design, the teachers evaluated whether the VR/AR contents delivered scientifically accurate information; whether they incorporated class goals set by teachers; and whether they can help students' inquiry. It turned out teachers gave negative feedbacks on VR/AR contents. The students evaluated VR/AR contents by assessing whether they help them with learning science but concluded they did not regard them necessary in science learning at school. Based on the findings, this study discusses which development direction VR/AR contents should take to be useful in teaching and learning science.

• Journal of Popular Narrative
• /
• v.25 no.3
• /
• pp.103-141
• /
• 2019

The purpose of this paper is to examine the logic of choice, transformation, and exclusion in The Song of sword, comparing it with the historical records. This paper explains how a novel is 'produced'. Through this, it searches for the aspects in which The Song of sword changed into 'a narrative revealing the disillusionment of the novel's subject with the world'. In the logic of choice, it explores which time and space were chosen in the novel, and which character was chosen to prepare the content and formal framework of the novel. In the logic of transformation, it is confirmed that the meaning of 'individual' is highlighted in the novel, unlike the historical records, by transforming both the character of the enemy and the meaning of war. In the logic of exclusion, it studies the characteristics of the modern (novel's) subject in the novel by excluding the characteristics of the historical subject that existed in a particular time and space. This paper differs from previous studies in that it examines the way in which a novel is produced by comparing and analyzing The Song of sword based on the historical records. Through these analyses, we can see the unity of various heterogeneous elements, such as the historical reality, the writer's ideology and imagination, and the desire of the contemporary in the form of a novel. Also, by examining the elements of text that can not be sutured into a complete form, we can see the meaning of the novel's text as an unstable system.

• Korea Trade Review
• /
• v.42 no.1
• /
• pp.27-45
• /
• 2017

A new phenomenon in recent trade is the rising interest in the trade of product production and manufacturing methods themselves, unlike in the past, when the interest was focused on the trade of tangible goods. That is, technology is considered as the object of trade instead of a simple element of production as "technology itself is commercialized". The broad meaning of technology encompasses all the property of knowledge with economic value. Its narrow meaning refers to technology used to produce and manufacture goods. Technologies have features such as no forms, heterogeneity, accumulation of value and extinction of right. The trade of technology commands different styles and content from that of tangible goods due to their unique characteristics; and accordingly, has various risk factors. In other words, technology can be traded in various ways according to commercial objectives including licensing, technical partnership, and joint investment in addition to general trading. The specific forms of technology transfer strategies depend on the purposes and situations between corporations. In case of technical trade with any form, the parties should be cautious about the following practical aspects: First, the contract should clearly define the scope and transfer method of technology. It is a very important matter how the provider of technology will provide the user of technology with abstract technology with no substantiality. Second, a monopoly on technology recognized as intellectual property rights is granted to their inventors for some periods of time, but anyone can have access to that technology after the term of existence. Thus, it is important to check the terms of existence of a patent as well as the terms of contract. Third, the user of technology should fulfill his confidentiality obligation to prevent the technology of the provider from being leaked to a third party unjustly. Fourth, the provider of technology should make a contribution to the successful implementation of the technology by the user as well as provide the licensed technology. Finally, a model contract is recommended to minimizing the legal hiatus of complex technology transfer trade when concluding a contract.