• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.307-315
• /
• 2008

In this study, it is investigated the properties of high strength concrete using mineral admixture, on the purpose of use of meta kaolin for the substitutive materials to silica fume which is so expensive. The plain mixtures are 3 degrees which are ordinary portland cement, blast furnace slag cement and OPC included fly ash 20%, and silica fume and meta kaolin are substituted for the each plain mixtures in the range of 20%. The results of experiment showed as follows. In case of silica fume was only used, the viscosity and slump flow of fresh concrete were much decreased, on the contrary air content increased. But as usage of meta kaolin increased, to being increase the viscosity of fresh concrete, slump flow increased and air content and usage of super-plasticizer were decreased. Accordingly the workabilities of concrete were against tendency between silica fume and meta kaolin. The compressive strength, velocity of ultrasonic pulse and unit weight were increased according to usage of meta kaolin, the properties of hardened concrete were judged that they are affected with air content of fresh concrete, so it is very important to control air content of high strength concrete. Therefore, the use of meta kaolin is prospected to the substitutive material of silica fume, in case of using silica fume and meta kaolin, it is judged that the optimum usage of silica fume and meta kaolin is about 10% respectively, considering workability and strength of concrete.

• Elastomers and Composites
• /
• v.27 no.3
• /
• pp.174-182
• /
• 1992

Main components of manufactured sealant were vinylester resin, polybutadiene rubber, asphalt and inorganic filler. For manufactured sealant, liquid and cure properties were tested experimantally. It showed better mechanical properties at rubber content $5{\sim}15phr$. Blown asphalt represented better properties than streight asphalt, showed the highest cohesive strength at asphalt content $6{\sim}8phr$. Appropriate usage of filler was $60{\pm}2%$ of total components, and $Al(OH)_3$ showed better flame-retardancy than $CaCO_3$.

• Food Science of Animal Resources
• /
• v.37 no.6
• /
• pp.793-798
• /
• 2017

Salt is an essential ingredient for cheese production, and it influences various aspects of cheese, including the shelf life, enzyme activity, flavor, casein hydration, and microbial proliferation during ripening. Several consumers avoid cheese with high salt content, mainly due to health problems such as hypertension, cardiovascular disease (CVD), stroke, and heart attacks. Salt has been commonly used for several purposes in cheese production, including for obtaining the required flavor and texture, for its preservative properties, and as a taste enhancer. However, salt usage has been opposed by the public and governmental bodies, who have been advised by health authorities that salt should be reduced or avoided in cheese for healthier life. However, salt replacement or reduction in cheese manufacturing requires formulation of intensive strategies. This review provides information about several strategies and innovations for reduction and replacement of salt in cheese manufacturing without seriously affecting the quality, microbial safety, and sensory properties of cheeses.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.273-278
• /
• 1998

$De-NO_x$ transition metals(Cu, Co)/ZSM-5 catalyst was made by mechanical alloying method, and their microstructures and repeated usage-properties were investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The conversions ability of NO in the catalyst was measured. A part of ZSM-5 in CO/ZSM-5 composite powders was amorphous and the amorphous phase became less stable with increasing Co content. Conversion ability of NO in 10Cu/ZSM-5 powders decreased from 89% to 12% and that in 10Co/ZSM-5 decreased from 22% to 17% by 7 times conversion tests.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.127-137
• /
• 2021

YouTube beauty content channels that utilize various topics and formats are undergoing quantitative and qualitative expansion. This study selected the top five channels represeting major domestic and foreign beauty brands, fashion magazines and beauty influencers through Statista and conducted a case study focusing on them. It will connect to a strategy for increasing beauty-related content by comparing content characteristics according to content producers. Also, it will help to reveal what types of content will be appealing more attractive to consumer. The result has shown that the growth of YouTube platforms has transformed passive consumers into new communicators by diversifying sources of product information. In addition, as content of different type was consumed by different producers, producer-oriented content was produced rather than objective journalistic gaze. Therefore, it was found that the delivery of 'brand values' that can strengthen the relationship between consumers and brands along with various entertainment elements that are effective for millennial in the future.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.362-369
• /
• 2014

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.27-33
• /
• 2014

As UCI (Universal Content Identifier) identification system becomes a national standard for content distribution, many digital contents are distributed through UCI identification system. However, problems associated with copyright infringement and copyright contracts occur due to lack of copyright information. ICN (Integrated Copyright Number), a code system developed for copyright management, includes copyright-related information for the purposes of usage settlement and accounting, illegal usage monitoring, and content filtering. ICN, however, has no information about distribution and content properties. Therefore, the linkage and integration between UCI and ICN can be a basis for the transparent and effective distribution of digital contents. In this paper, we propose a model for linking and integrating UCI and ICN, developing the efficiency in the value chain of each identified system by analyzing political factors and key technical elements between the two identification systems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.903-908
• /
• 2002

The production of waste glasses has been increased with the development of industry. The utilization of waste glass for concrete can cause the concrete to be cracked and to be weakened due to an expansion by alkali-silica reaction(ASR). When used the fibers with waste glass, there is an effect on reduction of expansion and strength loss due to ASR between the alkali in the cement paste and the silica in the waste glass. In this study, we conducted basic experimental research to analyze the possibilities of recycling of amber waste glass as fine aggregates for steel fiber reinforced concrete. Test results of fresh concrete. slump is decreased because grain shape is angular and air content is increased due to involving small size particles so much in waste glasses. Also. tensile and flexural strengths increased as the content of steel fibers increased. In conclusion, the content of waste glass below 40% is reasonable and usage of pertinent admixture is necessary to obtain workability or air content.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.1
• /
• pp.59-64
• /
• 2012

Sand-concrete is being researched for potential usage in construction in Saharan regions of Algeria, because of shortage in coarse aggregate resources. This research work deals with the effect of dune sand, available in huge quantities in these regions, on the properties of flowing sand-concrete (FSC) prepared with different proportions of dune and river sands. Mini-cone slump test, v-funnel flow-time test and viscosity measurements were used to characterize the behaviour of FSC in fresh state. The 28-day compressive strength was also determined. Test results show that an optimal content of dune sand, which makes satisfied fresh and hardened properties of FSC, is obtained. Moreover, the obtained flow index (constant b) calculated by the help of power-law viscosity model is successfully correlated to the experimental results of v-funnel flow time.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2007

In this study, the change of neutron detection can be use the basic data of asphalt content detector under the influence of the jurisdiction and usage of radioisotopes are limited of $100[{\mu}Ci]$ or less. To obtain neutron detector's properties using design materials in first step phase, the change of neutron detection is to be calculated how can be increase or decrease due to the change of asphalt content, also it look over the change results which is installed absorber(cadmium plate) around moderator(polyethylene) using MCNP Code.