• ETRI Journal
• /
• v.28 no.1
• /
• pp.111-114
• /
• 2006

An alternative human interface enabling people with severe motor disabilities to control an assistive system is presented. Since this interface relies on the biosignals originating from the contraction of muscles on the face during particular movements, even individuals with a paralyzed limb can use it with ease. For real-world application, a dedicated hardware module employing a general-purpose digital signal processor was implemented and its validity tested on an electrically powered wheelchair. Furthermore, an additional attempt to reduce error rates to a minimum for stable operation was also made based on the entropy information inherent in the signals during the classification phase. In the experiments, most of the five participating subjects could control the target system at their own will, and thus it is found that the proposed interface can be considered a potential alternative for the interaction of the severely disabled with electronic systems.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.583-590
• /
• 2012

In this paper, we present a new approach for speaker diarization. First, we use the prosodic information calculated on the original speech to resynthesize the new speech data utilizing the spectrum modeling technique. The resynthesized data is modeled with sinusoids based on pitch, vibration amplitude, and phase bias. Then, we use the resynthesized speech data to extract cepstral features and integrate them with the cepstral features from original speech for speaker diarization. At last, we show how the two streams of cepstral features can be combined to improve the robustness of speaker diarization. Experiments carried out on the standardized datasets (the US National Institute of Standards and Technology Rich Transcription 04-S multiple distant microphone conditions) show a significant improvement in diarization error rate compared to the system based on only the feature stream from original speech.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.73-76
• /
• 2005

This study aims to suggest a simple and convenient design for a mix proportion method for high performance concrete by determining the optimum fine aggregate ratio and minimum binder content based on the maximum density theory. The mix design method introduced in this study adopted the optimum fine aggregate ratio with a minimum void and binder content higher than the minimum binder content level. The research results reveal that the method helps to reduce trial and error in the mixing process and is a convenient way of producing high performance concrete with self filler ability. In an experiment based on the mix proportion method, when aggregate with the fine aggregation ratio of 41$\%$ was used, the minimum binder content of high performance concrete was 470kg/$m^{3}$ and maximum aggregate capacity was $0.657m^{3}/m^{3}$. In addition, in mixing high performance concrete, the optimal slump flow to meet filler ability was 65$\pm$5cm, V load flow speed ranged from 0.5 to 1.5.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.3
• /
• pp.575-580
• /
• 2017

In these days, the big-size and high resolution multimedia file is widely used through networks. To transfer and service effectively, the internet network technology is necessary to substitute broadcasting. Normally Content Delivery Network(CDN) is widely used in conventional internet for multimedia services. But it has a small bandwidth to service. So to solve this problems, many researchers have suggest the protocol for download, content distribution/saving, server synchronization, caching, pushing rate, and streaming etc. But all of these has some defects like low resolution, packets loss and delay, real application implementations etc. So, this paper suggests a new method of network protocol based on P2P collaboration and user's content using information. And it evaluated the performance of suggested method. As the results, it showed the effectiveness of 4 performances indices : download speed, decreasing rate of connected user in same time, adaptive hit ratio, traffic decreasing rate.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.57-64
• /
• 2013

PURPOSES : It is to evaluate lightweight soil as a subgrade material based on mechanical tests and calculation of pavement performance. METHODS : In this research, various contents of cement and air foam are used to make lightweight soil using wasted dredged soil. Uniaxial compressive strength test is conducted to evaluate strength of 7 and 28 day cured specimens. Secant modulus was calculated based on the stress and strain relationship of uniaxial compressive strength test. Resilient modulus test was measured using by repeated triaxial compression test. The measured resilient modulus was used in layered elastic program to predict fatigue and rutting life at a given pavement structure. RESULTS : Uniaxial compressive strength increases as cement content increases but decrease as air foam content increases. Resilient modulus also increases as cement content increases and decrease as air foam content decrease. CONCLUSIONS : It is concluded that dredge clay soil can be used as subgrade layer material using by lightweight treated soil method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2319-2337
• /
• 2019

In this paper, we study the distributed cooperative caching for Internet content providers in a small cell of heterogeneous network (HetNet). A general framework based on bankruptcy game model is put forth for finding the optimal caching policy. In this framework, the small cell and different content providers are modeled as bankrupt company and players, respectively. By introducing strategic decisions into the bankruptcy game, we propose a caching value assessment algorithm based on analytic hierarchy process in the framework of bankruptcy game theory to optimize the caching strategy and increase cache hit ratio. Our analysis shows that resource utilization can be improved through cooperative sharing while considering content providers' satisfaction. When the cache value is measured by multiple factors, not just popularity, the cache hit rate for user access is also increased. Simulation results show that our approach can improve the cache hit rate while ensuring the fairness of the distribution.

• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.433-451
• /
• 2020

Purpose: The purpose of this study is to investigate how the type of virtual reality content production affects the interaction and immersion that is a virtual reality characteristic, and to provide the platform companies and content producers with the basic information necessary to provide the production and service of content suitable for VR characteristics. Methods: Based on the data collected in the survey, multiple regression analysis and hierarchical regression analysis were used. The measurement tools used in this study were studied through three-dimensional composition, including the characteristics and interaction and immersion of content produced in 2D, 3D and 360°, which are elements of virtual reality characteristics. Results: The results of this study are as follows. Among the types of content production, content produced with 2D and 360 technologies was found to affect immersion, while content produced in 3D affected interaction. Motion sickness has been investigated to affect both immersion and interaction. Conclusion: Service-provided platform enterprises and content-making enterprises should consider content-making and providing services that suit service characteristics and purposes, taking into account the characteristics of interaction and immersion in content-making investment and service delivery.

• Journal of Digital Convergence
• /
• v.7 no.3
• /
• pp.137-146
• /
• 2009

This paper aims to propose a framework of content creating group with creativity under new convergence environments. The framework is built based on content concept hierarchy(deep/surface) relating with the creativity of group members. The diversity of group members(potential creativity) decrease and change into creative abilities in one unified view at each content concept hierarchy in time. To do this, three methods of building a creative group(interaction-base, direction-base, hybrid) are proposed. Cooperating processes and operators are designed to promote creative abilities in the content producing group. These cooperations are considering new media convergence industry's job road map(IPTV) and fundamental content attributes(semantic, narrative, discourse). In the framework, creative content is produced with the help of member's cultural openness, media richness and synchronicity, hierachical adaptability on dissimilarity. Deep level creativity of cognitive semiotics on moving image content is composed of psychological, transformational, situational creating abilities in the structure of group members. Designing analogy, metaphor, symbol operators help members to traverse deep structure of content concept hierarchy. Our framework has strong points to relate fundamental content deep structure with structure of content producing group and to induce creativity on cognitive structure of human being.

• Geomechanics and Engineering
• /
• v.17 no.3
• /
• pp.271-278
• /
• 2019

In recent years, the crack accidents of earth and rockfill dams occur frequently. It is urgent to study the tensile strength and tensile failure mechanism of the gravelly soil in the core for the anti-crack design of the actual high earth core rockfill dam. Based on the self-developed uniaxial tensile test device, a series of uniaxial tensile test was carried out on gravelly soil with different gravel content. The compaction test shows a good linear relationship between the optimum water content and gravel content, and the relation curve of optimum water content versus maximum dry density can be fitting by two times polynomial. For the gravelly soil under its optimum water content and maximum dry density, as the gravel content increased from 0% to 50%, the tensile strength of specimens decreased from 122.6 kPa to 49.8 kPa linearly. The peak tensile strain and ultimate tensile strain all decrease with the increase of the gravel content. From the analysis of fracture energy, it is proved that the tensile capacity of gravelly soil decreases slightly with the increasing gravel content. In the case that the sample under the maximum dry density and the water content higher than the optimum water content, the comprehensive tensile capacity of the sample is the strongest. The relevant test results can provide support for the anti-crack design of the high earth core rockfill dam.

• Journal of the Korean Society for information Management
• /
• v.24 no.3
• /
• pp.271-297
• /
• 2007

Since the use of the Internet has proliferated, the availability of illegal and harmful content has been a great concern to both governments and Internet users. Among various solutions for issues related to such content, Internet content filtering technologies have been developed for enabling users to deal with harmful content. In recent years, commercial filtering has become massively popular. Many parents, teachers and even governments have chosen commercial filtering software as a feasible technical solution for protecting minors from harmful information on the Internet. The Internet content filtering software market has grown significantly. However, Internet content filtering software has led to intense debate among civil liberties groups, They deem this to be censorship and argue that Internet filtering technologies are simply unworkable because they have inherent weaknesses. They are critical of the fact that most filtering has violated free speech rights and will eventually wipe out honor and controversial, yet innocent incidences of free speech on the Internet. In this article Internet content filtering, in particular PICS/RDF-based label filtering, so-called Internet content rating system, will be explored and its advantages and drawbacks relating to end-users' autonomy and freedom of expression will be discussed.