• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권1호
• /
• pp.36-43
• /
• 2007

토양위해성평가를 위한 토양조사방법의 목적은 오염정도와 범위를 파악하여 부지의 대표적인 토양노출농도를 결정해야 하는 것은 물론이고 부지의 물리화학적 특성을 조사하여 노출평가시 사용될 수 있는 주요 정보를 제공하는데 있다. 앞으로 우리나라도 토양위해성평가를 위한 토양조사시 두 가지 점을 고려해야 할 것으로 나타났다. 첫째, 현재 우리나라의 토양조사는 오염정도와 범위 확인을 위한 조사에 국한하고 있으므로 차후 위해성평가를 위해서는 부지의 물리화학적 특성파악을 위한 조사가 추가되어야 한다. 둘째, 국내와 외국의 토양조사방법에 있어 가장 큰 차이는 외국의 현장조사계획에서는 모든 데이터에 대해 통계학적 개념을 반영하여 시료채취 개수 결정 및 오염여부 판단에 신뢰성을 확보하고 있다는 점으로 우리도 이에 대한 보완이 필요할 것으로 판단된다. 본 연구에서는 토양위해성평가를 위한 토양조사방법을 별도로 마련하는 것보다 기존 토양정밀조사지침과 연계하여 토양위해성평가의 목적을 이룰 수 있는 토양조사방안을 제안하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.119-133
• /
• 2013

In the present study, several groundwater vulnerability assessment methods were applied to an agricultural area of Gumma in Korea. For the groundwater intrinsic vulnerability assessment, the performance of DRASTIC, SINTACS and GOD models was compared and an ensemble approach was suggested. M-DRASTIC and multi-linear regression (MLR) models were applied for the groundwater specific vulnerability assessment to nitrate of the study site. The correlation coefficient between the nitrate concentration and M-DRASTIC index was as low as 0.24. The result of the MLR model showed that the correlation coefficient is 0.62 and the areal extents of livestock farming and upland field are most influential factors for the nitrate contamination of groundwater in the study site.

• 한국토양환경학회지
• /
• 제2권3호
• /
• pp.31-38
• /
• 1997

산성폐수에 함유된 오염물질의 물리적 화학적 특성이 배우 복잡하기 때문에 산성폐수에 의해 오염된 지표수나 지하수등의 오염정도를 지역적, 시간적 변화에 따라 비교하는 일은 쉽지가 않다. 본 논문에서는 산성폐수에 의해 오염된 지표수나 지하수의 오염도를 정량적으로 평가할 수 있는 수학적 지표를 제시하였으며, 오염지표를 이용하여 국내 폐탄광의 갱내 유출수에 대한 오염도를 검토하였다. 사용된 오염지표(Acid Mine Drainage Index)는 수질의 오염정도를 가장 잘 나타낼수 있는 7개의 변수 즉, pH값, 황산염(Sulfate), 철, 망간, 알루미늄, 구리 및 아연 함량을 이용하여 계산하였다. 사용된 변수는 오염도에 미치는 상대적인 중요도를 감안하여 가중치를 사용하였으며 , pH값 및 황산염함량에 가장 높은 가중치를 부여하였다. 국내 폐광산에서 유출되는 산성폐수의 오염도 평가결과 경북 문경에 소재한 석봉탄광이 조사탄광중 상대적으로 오염도가 높았으며, 지역적으로 영동지역에 위치한 폐탄광의 갱내 유출수가 영서, 중부, 서부 및 남부에 위치한 폐탄광에 비해 오염도가 높게 나타났다.

• 한국물환경학회지
• /
• 제37권4호
• /
• pp.296-305
• /
• 2021

This work investigated heavy metal pollution in surface sediments of rivers in Busan, Korea. Surface sediments were analyzed in order to conduct contamination assessment of organic matter, nutrients, and heavy metal concentrations. Contamination assessment of heavy metals was conducted using geoaccumulation index (I_geo), pollution load index (PLI), and potential ecological risk index (RI). Accumulation of organic matter and nutrients were affected by water discharged from sewage treatment plant. The concentrations of organic matter and nutrients were found to be greater in points which were close to the sewage treatment plant more than points furthest. The concentrations of Pb, Zn, Cu, Cd, Hg, As, Cr, and Ni were found to be greater in surface sediment more than in the background. The mean concentrations of heavy metals were in the order of Zn (323.5 mg/kg) > Cu (70.5 mg/kg) > Pb (39.8 mg/kg) > Cr (33.4 mg/kg) > Ni (13.5 mg/kg) > As (9.4 mg/kg) > Cd (0.84 mg/kg) > Hg (0.092 mg/kg). The result of geoaccumulation indices indicated that Hg > Cr > Cu > Ni > Zn > As > Pb > Cd were found in order of severe contamination by heavy metals. From PLI and RI analysis, it was evident that the Suyeonggang 2 was the most contaminated river.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권5호
• /
• pp.1-10
• /
• 2005

본 연구에서는 토양오염지역의 위해성 평가에 관한 미국, 영국, 네덜란드, 독일, 덴마크의 정책을 비교 분석하였다. 이들 국기는 미국과 18개 유럽 국가들에 관한 유럽연합의 초기 분석 자료를 이용하여 선택하였다. 이로부터 도출한 시사점은 토양오염지역의 조사 및 관리를 위해 각 국가들은 위해성 평가를 이용하고 있으며, 토양질 기준을 정책수 단으로 위해성 평가와 병행하고 있는 것이다. 이러한 외국의 정책과 시사점을 고려할 때, 위해성 평가를 정책 수단으로 이용하고 있지 않은 우리나라에 대해 다음과 같은 정책 추진을 제언할 수 있다. 첫째, 국가적인 차원에서 이용 할 수 있는 합리적인 위해성 평가 방법의 마련이다. 둘째, 부지의 위해성 평가를 토양질의 기준과 연계시키는 것이다. 우리나라의 실정에 적합한 부지의 위해성 평가방법을 마련하기 위해서는 추가적인 자료의 분석을 통한 심층적인 연구가 필요하고, 사회 다양한 계층간의 논의 및 합의가 필요할 것이다. 토양오염으로 간주되는 토양질 기준을 초과하는 부지의 경우에 위해성 평가의 시행을 고려할 수 있을 것이다. 또한 위해성 평가는 오염물질의 자연함량이 일반적으로 다른 특정 지역, 예를 들면 광산지역 등에 대해 적용하는 것을 고려할 수 있을 것이다. 금번 연구의 결과는 토양 오염지역의 위해성 평가에 관해 우리가 시행해야 할 추가적인 연구 및 정책시뮬레이션의 실행 동기를 함께 제공하고 있는 것으로 우리나라의 토양오염지역을 조사, 복원, 해제에 따른 법, 제도 발전의 한 부문으로 사용될 수 있을 것이다.

• 대한의생명과학회지
• /
• 제23권4호
• /
• pp.333-338
• /
• 2017

This study was performed to assess microbial contamination of Aronia melanocarpa, blueberry, raspberry, and cranberry sold in several markets. We investigated total aerobic bacteria and detected foodborne bacteria by multiplex PCR from Aronia melanocarpa, blueberry, raspberry, and cranberry. Total aerobic bacteria of each sample showed mean 3.54 log CFU/g for Aronia melanocarpa, mean 1.90 log CFU/g for blueberry, and mean 1.40 log CFU/g for raspberry, but not detected in cranberry. Specially, Aronia melanocarpa contained high total aerobic bacteria contamination among various berries and contamination level reached 4.17 log CFU/g in sample 5. To evaluate the effect of distribution conditions, we also investigated total aerobic bacteria of various berries. Total aerobic bacteria showed mean 2.89 log CFU/g for berries in refrigerated distribution and 1.40 log CFU/g in frozen distribution, but not in dry distribution. For assessment of foodborne bacteria contamination, we conducted PCR with multiplex primers of E. coli O157, S. aureus, B. cereus, V. parahaemolyticus, L. monocytogenes, Y. enterocolitica, Salmonella spp., Shigella spp. Among these foodborne bacteria, B. cereus was amplified in Aronia melanocarpa in sample 4 and blueberry in sample 1, 2, 3, and 5. The result of quantitative analysis of B. cereus contamination showed 4.08 log CFU/g of Aronia melanocarpa in sample 4 and higher contamination rate 4.07 log CFU/g of blueberry in sample 3. These results suggest that strict food safety control in harvest and distribution of various berries is necessary to prevent foodborne disease and improve microbiological safety.

• Environmental Analysis Health and Toxicology
• /
• 제31권
• /
• pp.6.1-6.10
• /
• 2016

Objectives This study examined the spatial distribution and the extent of soil contamination by heavy metals resulting from primitive, unconventional informal electronic waste recycling in the Agbogbloshie e-waste processing site (AEPS) in Ghana. Methods A total of 132 samples were collected at 100 m intervals, with a handheld global position system used in taking the location data of the soil sample points. Observing all procedural and quality assurance measures, the samples were analyzed for barium (Ba), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), mercury (Hg), nickel (Ni), lead (Pb), and zinc (Zn), using X-ray fluorescence. Using environmental risk indices of contamination factor and degree of contamination ($C_{deg}$), we analyzed the individual contribution of each heavy metal contamination and the overall $C_{deg}$. We further used geostatistical techniques of spatial autocorrelation and variability to examine spatial distribution and extent of heavy metal contamination. Results Results from soil analysis showed that heavy metal concentrations were significantly higher than the Canadian Environmental Protection Agency and Dutch environmental standards. In an increasing order, Pb>Cd>Hg>Cu>Zn>Cr>Co>Ba>Ni contributed significantly to the overall $C_{deg}$. Contamination was highest in the main working areas of burning and dismantling sites, indicating the influence of recycling activities. Geostatistical analysis also revealed that heavy metal contamination spreads beyond the main working areas to residential, recreational, farming, and commercial areas. Conclusions Our results show that the studied heavy metals are ubiquitous within AEPS and the significantly high concentration of these metals reflect the contamination factor and $C_{deg}$, indicating soil contamination in AEPS with the nine heavy metals studied.

• 한국환경농학회지
• /
• 제12권3호
• /
• pp.325-333
• /
• 1993

• Journal of Radiation Protection and Research
• /
• 제45권3호
• /
• pp.101-107
• /
• 2020

Background: An important lesson learned from the Fukushima accident is that the transition to the mid- and long-term phases from the emergency-response phase requires less than a year, which is not very long. It is necessary to know how much radioactive material has been deposited in an urban area to establish mid- and long-term countermeasures after a radioactive accident. Therefore, an urban deposition model that can indicate the site-specific characteristics must be developed. Materials and Methods: In this study, the generalized urban deposition velocity and the subsequent variation in radionuclide contamination were estimated based on the characteristics of the Korean urban environment. Furthermore, the application of the obtained generalized deposition velocity in a hypothetical scenario was investigated. Results and Discussion: The generalized deposition velocities of ¹³⁷Cs, ¹⁰⁶Ru, and ¹³¹I for each residence type were obtained using three-dimensional (3D) modeling. For all residence types, the deposition velocities of ¹³¹I are greater than those of ¹⁰⁶Ru and ¹³⁷Cs. In addition, we calculated the generalized deposition velocities for each residential types. Iodine was the most deposited nuclide during initial deposition. However, the concentration of iodine in urban environment drastically decreases owing to its relatively shorter half-life than ¹⁰⁶Ru and ¹³⁷Cs. Furthermore, the amount of radioactive material deposited in nonresidential areas, especially in parks and schools, is more than that deposited in residential areas. Conclusion: In this study, the generalized urban deposition velocities and the subsequent deposition changes were estimated for the Korean urban environment. The 3D modeling was performed for each type of urban residential area, and the average deposition velocity was obtained and applied to a hypothetical accident. Based on the estimated deposition velocities, the decision-making systems can be improved for responding to radioactive contamination in urban areas. Furthermore, this study can be useful to predict the radiological dose in case of large-scale urban contamination and can support decision-making for long-term measurement after nuclear accident.

• KSTLE International Journal
• /
• 제8권1호
• /
• pp.1-6
• /
• 2007

Chromatic device was developed using light emitting diodes, optic fibers and photodiodes. Chromatic ratio and total contamination parameters based on transmitted light intensity in Red, Green, and Blue wavelengths were used for oil chemical and particulate contamination assessment. Chromatic ratio criterion was found independent of the particulate contamination of oil; but depended on chemical degradation, being more sensitive for synthetic than mineral hydraulic oil. Total contamination index of the sensor depended on both the chemical degradation and particulate contamination of the oil; being most sensitive in blue wavelength, and least in the red. Test results for synthetic hydraulic oils monitored corroborated with results of other tests such as viscosity, total acid number, elemental optical emission spectroscopy, particulate counts and UV-VIS photospectrometry. Chromatic ratio showed a clearer indication of oil degradation, compared to key monitoring parameters such as total acid number, viscosity and particle counts. The results showed that these parameters are effective criteria for the condition monitoring of synthetic hydraulic oils.