• Korean Journal of Veterinary Research
• /
• v.62 no.1
• /
• pp.5.1-5.5
• /
• 2022

Many countries have imposed regulations relating to concerns that hide contamination will affect the cleanliness of abattoirs. However, South Korea has not indicated any clear criteria. The purpose of this study is to use surrogate bacteria to measure the contamination in abattoirs caused by contaminated cattle hides. The swab contact method and plate count method are used. Surrogate bacteria are found in most internal environments after the final process. These surrogates remained on the carcass even after the final washing process. This paper is the first study in South Korea that use surrogate bacteria to analyze contamination levels in abattoirs.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.7
• /
• pp.43-52
• /
• 2015

The uranium removal capacity of radish sprouts (Raphanus sativus L.) in groundwater was calculated on the basis of the amount of uranium accumulated in the radish sprouts rather than the concentration in solution, of which process was very limited in previous studies. Continuous rhizofiltration clean-up system was designed to investigate the feasibility of radish sprouts, applying for uranium contaminated groundwater (U concentration: 110 μg/L) taken at Bugogdong, Busan. Six acrylic boxes (10 cm × 30 cm × 10 cm) were connected in a direct series for the continuous rhizofiltration system and 200 g of radish sprouts cultivars was placed in each box. The groundwater was flushed through the system for 48 hours at the constant rate of 5 mL/min. The rhizofiltration system was operated in the phytotron, of which conditions were at 25℃ temperature, 70% of relative humidity, 4,000 Lux illumination (16 hours/day) and 600 mg/L of CO₂ concentration. While 14.4 L of contaminated groundwater was treated, the uranium removal efficiency of the radish sprouts (1,200 g in wet weight) was 77.2% and their removal capacities ranged at 152.1 μg/g-239.7 μg/g (the average: 210.8 μg/g), suggesting that the radish sprouts belong to the group of hyper-accumulation species. After the experiment, the sum of U amounts accumulated in radish sprouts and remained in groundwater was 1,472.2 μg and the uranium recovery ratio of this rhizofiltration experiment was 92.9%. From the results, it was investigated that the radish sprouts can remove large amounts of uranium from contaminated groundwater in a short time (few days) because the fast growth rate and the high U accumulation adsorption capacity.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.85-93
• /
• 2007

The purpose of this study was to evaluate the microleakage of root-end filling material filled in blood contaminated root-end cavity and self-etching adhesive placed over blood contaminated resected root apices without root-end preparation. Extracted, human maxillary incisors, canines and mandibular premolar were randomly divided into four groups of 15 teeth each. After canal preparation, resection of the apex and root-end preparation, MTA and IRM were filled in the root-end cavity (A and B group). After canal preparation and resection of the apex, Clearfil SE Bond and Prompt L-Pop were applied over the contaminated root-end surfaces (C and D group). The roots were then subjected to 15cm of water pressure to simulate periapical microleakage stress. Data were analyzed using one-way ANOVA. The results were as follows : 1. All groups showed a tendency of decreasing microleakage in process of time after 2weeks later except IRM group. 2. After 2 weeks and 1 month, MTA group showed less microleakage significantly than other groups(p<0.05). After 2 months, Prompt L-Pop group showed less microleakage significantly than other groups(p<0.05). 3. After 9 months, there were no significant differences among four groups(p>0.05). Thus it is considered that apical sealing using adhesives system without root-end preparation is good method in endodontic surgery.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.3-15
• /
• 1999

This paper includes the basic experimental results performed for developing an innovative and technologically feasible process wherein gaseous ozone, a powerful oxidant. is injected directly into vadose zone by which in-situ chemical degradation of semi- or, non-volatile petroleum product such as diesel fuel is derived. As ozone gas injected continuously(50mL/min, 119.0$\pm$6.1mg/L) into soil packed columns artificially contaminated with diesel fuel(initial concentration 1,485mg-DRO/kg/soil), the removal rates at the inlet and outlet point of 14hrs-operated column are 87.9% and 100.0%, respectively. On the other hand, soil vapor extraction system showed less than 30% of removal rates of residual diesel both at the inlet and outlet samples under the same experimental conditions which confirms the limited treatability of SVE in diesel contaminated soil.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.73-81
• /
• 2013

Various remediation methods have been applied to clean soils contaminated with pollutants. They remove contaminants from the soils by utilizing physicochemical, biological, and thermal processes and can satisfy soil remediation standards within a limited time; however, they also have an effect on the biological functions of soils by changing soil properties. In this study, changes of the biological properties of soils before and after treatment with three frequently used remediation methods-soil washing, land farming, and thermal desorption-were monitored to investigate the effects of remediation methods on soil biological functions. Total microbial number and soil enzyme activities, germination rate and growth of Brassica juncea, biomass change of Eisenia andrei were examined the effects on soil microorganisms, plant, and soil organisms, respectively. After soil washing, the germination rate of Brassica juncea increased but the above-ground growth and total microbial number decreased. Dehydrogenase activity, germination rate and above-ground growth increased in both land farming and thermal desorption treated soil. Although the growth of Eisenia andrei in thermal desorption treated soil was higher than any other treatment, it was still lower than that in non-contaminated soil. These results show that the remediation processes used to clean contaminated soil also affect soil biological functions. To utilize the cleaned soil for healthy and more value-added purposes, soil improvement and process development are needed.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1998

For successful soil flushing process selection of appropriate flushing reagents is essential. Futhermore, obtaining operating parameters for site remediation application through various bench-scale tests is also important. In this research a series of organic acids (acetic, citric, oxalic, and succinic acids) were tested for flushing capability. Copper-contaminated natural soil was used as a test medium, and flushing experiments were performed with batch system. All the organic acids used did not provide effective flushing conditions at concentration of 1 mM. At the acid concentration of 50 and 100 mM copper was removed efficiently although 50 and 100 mM did not show any significant differences in removal efficiencies. Citric acid and oxalic acid removed copper more efficiently than the others, and especially, citric acid showed over 87% of removal efficiency of copper at near neutral pH of 5 to 7. Speciation of extracted copper using GEOCHEM simulation showed majority of extracted copper existed as complexed with organic acids and only small portion of organic acids were complexed with copper indicating promising application of soil flushing with organic acid to heavy metal-contaminated site remediation.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.45-54
• /
• 2000

Several chemical washing procedures were applied to Zn and Cd contaminated soil. Batch and column tests were performed to determine the metal extraction efficiency as a function of pH and concentration. Washing efficiencies by water and NaOH are very low but those by HCI, EDTA and Oxalic acid are high. The most efficient washing occurs in case of using HCI because heavy metal is ionized easily at the condition of low pH. EDTA and Oxalic acid are also effective to extract Zn and Cd because they have a high complexation affinity for heavy metals forming active surface complexes. More Zn is released than Cd is and release trend is increased as pH is decreased and concentration of washing solution is increased. When heavy metal contaminated soil is remediated, HCI and EDTA are more effective to remove Zn than others are. Meanwhile HCI and Oxalic acid are more effective to remove Cd than others are.

• Journal of Environmental Impact Assessment
• /
• v.25 no.5
• /
• pp.333-344
• /
• 2016

In this study, the efficiency of natural attenuation was evaluated through the hydrogeological characteristics such as monitoring and analyses, tracer tests, chemical composition analysis of the groundwater at a military site contaminated by petroleum hydrocarbon in korea. Also, based on the results, the natural attenuation rate by distance and the expressed biodegradation capacity(EBC) was evaluated. The regression slope of -0.0248($K/V_x$) and bulk attenuation rate of $1.7{\times}10^{-3}/day$ were calculated respectively. The range of total expressed biodegradation capacity(EBC) of BTEX was shown from 9.1 mg/L to 10.0 mg/L(average 9.7 mg/L). It was confirmed that the denitrification which was expressed about 63.6% in the total EBC is the largest influence redox process. Consequently, the biodegradation capacity is considered to be sufficient for remediation in the BTEX average concentration of 1.326 mg/L.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 1998

This study presents a numerical model that can simulate changes of particle size distribution (PSD) of PCB-contaminated coastal sediments. The developed model has one spatial dimension including sedimentation and vortical dispersion as well as coagulation. The reason for considering the vortical transport mechanisms is to calculate residence time of the particles. Using the model and Initial PSD data based on actual coastal sediments contaminated with PCBs, this study shows results of model simulations. Within 48 hours of the simulation time, the PSD changed significantly and the particles were removed from water in different rates between different particle sizes. It also shows that coagulation can act an important role in this process. The model may be useful in assessing the range of resuspended sediments that can pollute neighboring areas during environmental remediation projects such as dredging.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.90-96
• /
• 2003

This study was performed to evaluate effect of extraction mode on SVE efficiency for fuel-contaminated soil. A gas station was selected for this study. As a result of pressure test in well head, soil texture of contaminated site under the gas station was very different from site to site. SVE system was operated in intermittent mode (1hr extraction / 3hr rest) or continuous mode. Capacity of air blower was $1m^3/min$. Extration mode test was conducted in two severe contaminated sites. In both two sites, cumulative TPHgas mass of intermittent extraction mode was higher than that of continuous mode. Considering long term operation of SVE in a field, in general, it was thought that intermittent extraction mode was effective in view of vaporized TPHgas mass and electrical cost.