• 대한토목학회논문집
• /
• 제32권4B호
• /
• pp.261-266
• /
• 2012

본 연구에서는 중금속에 의한 토양환경영향평가 시 노출농도 기반의 평가와 위해성 기반의 평가를 비교하였다. 이를 위해서 폐광산 지역에서 중금속 오염노출을 조사하였다. 발암위해도와 비발암위해도 평가 결과, 토양섭취의 영향이 토양접촉의 영향보다 지배적이었고, 우려기준을 초과하는 경우에는 총 위해도도 기준을 초과하였다. 우려기준을 초과하지 않는 경우도 대부분 총 위해도 기준을 초과하였으므로, 위해도 기반의 평가가 노출농도 기반의 평가보다 더 민감한 기준이라는 기존 인식을 확인하였다. 하지만 토양접촉 경로의 비발암위해성 결과들의 심층 분석 결과, 우려기준을 초과함에도 위해도 기준을 초과하지 않는 경우들이 검출되었다. 본 연구에서는 신뢰성 있는 폐광산지역의 토양오염정화사업 타당성 평가를 위해서는 현재 노출농도기반의 평가 위주에서 위해성 기반 평가로의 정책 전환의 필요성이 확인되었고, 위해도 원단위 및 판단기준의 객관적 설정을 위한 연구 필요성이 제시되었다.

• 환경생물
• /
• 제21권4호
• /
• pp.352-357
• /
• 2003

Phenanthrene, one of Polycyclic aromatic hydrocarbons with three aromatic rings, is a ubiquitous contaminant in the environment. Phenanthrene has been identified in ambient air, drinking water and sediment. We examined the effect of phenanthrene on steroid hormones level of olive flounder, Paralichthys olivaceus. Plasma testosterone level was increased significantly in fish exposed to phenanthrene($\geq1.0 \mu M$) at 4th week. However, there was no significant changes of estradiol-17$\beta$ concentration in fish exposed to phenanthrene. The physiological variation in phenanthrene exposed fish was a dramatic increase in plasma cortisol level. It is concluded that chronic exposure of phenanthrene can induce increase of plasma testosterone levels and elevate the plasma cortisol level in flounder, Paralichthys olivaceus.

• 한국환경과학회지
• /
• 제21권1호
• /
• pp.57-67
• /
• 2012

The midge samples were undertaken at three streams, representing different surrounding environments, to investigate the contaminant exposure of midge. The content of heavy metals in midge collected in Singil stream were generally higher as a result of input to the industrial effluents with respect to other streams. Adsorption experiments were done to evaluate the possibility of removing contaminants from water with midge. Diazinon and heavy metals were contaminant target compounds in this study. The removal rate of diazinon in water by midge was 60-75%. In the case of Cu, the removal rate was reached around 90% at the lower initial concentration of 1.87 and 0.81 ppm rather than 4.25 ppm. The reduction of concentration of Cr and Cd according to the lapse of time was similar to the Cu, but their removal rates were shown 50% and 60-74%, respectively. The removal rate of Zn by midge represented relatively high level within the experimental condition. No change in concentration of Cr and As with time were occurred at all experimental conditions. It accounts for the fact that the reduction of Cr and As could not be achieved through the adsorption process, using midge.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.253-260
• /
• 2015

클린룸 내부에서 발생한 오염은 복잡한 공정과 여러 가지 장비에 의해서 더욱 더 복잡한 형태를 나타내며, 다양한 오염 형태로 나타나게 된다. 이러한 경향으로 인해서 클린룸 내부에서 발생한 오염입자를 생산공정에 영향을 주지 않으면서 경제적이고 효율적으로 제어하기 위해서, 오염입자 분포에 대한 상세한 해석이 요구된다. 따라서 이러한 오염제어의 목적으로 오염원 추정법이 개발되었다. 본 논문에서는 기여도를 추정하기 위한 계산 가속화 방법으로 영역분할법을 제안하였다. 이 결과로부터 각 오염원의 오염 발생량을 정량적으로 예측할 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.319-324
• /
• 2006

The purpose of this study Is to evaluate the efficacy of multizone simulation that enables to grasp of details about microbial contaminant problem in an multistoried apartment. We used actual indoor test data to figure up microbial contaminant level as initial value for the multizone simulation and estimated the various effects of indoor occupant infected with germs and the performance of air sterilization by using multizone simulation in substitute for infeasible experimental approach. The results show that natural ventilation make ourselves generally useful for removing indoor microbial contaminants. The results also show that the performance of air sterilization reach the maximum in the case of using mechanical ventilation and UVGI air sterilizer. The conclusion is that this multizone simulation is useful tool for actual design method for Immune building systems.

• 드라이브 ㆍ 컨트롤
• /
• 제9권2호
• /
• pp.28-38
• /
• 2012

Monitoring of system cleanliness levels and counting of particulate contaminant are fundamental to achieving hydraulic system reliability as any departure from the specified cleanliness level is often a precursor to future failures. On-line monitoring of cleanliness levels has the advantage of giving data both very quickly and accurately as environmental influences are eliminated. In this way, corrective actions can be promptly implemented. Most on-line instruments are sensitive to system conditions to a greater or lesser extent, but Automatic Particle Counters (APCs) working on light extinction principles are especially sensitive to the presence of optical interfaces caused by such conditions as fluid mixtures, emulsions, free water and air bubbles. These conditions give erroneous data and can result in drawing incorrect conclusions, wasting maintenance time and ultimately, reduced user confidence in cleanliness monitoring. This paper describes such conditions and shows how the correct selection of the analysis technique can result in reliable cleanliness level data.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1306-1313
• /
• 2012

This paper reports the contamination performance of two distribution arresters (new and used ones) tested under three different contaminant conditions - clean fog, ESDD (equivalent salt deposit density) level (A, B, C, and D), and kaolin contamination conditions, and their leakage current, total leakage current, and component of the resistive leakage current were measured in order to diagnose arrester deterioration. The 3rd harmonics was larger than 5th and 7th ones for the arrester under the clean fog, and as the ESDD contamination level was applied, 5th one became relatively larger than 3rd one. Therefore, these results indicated that the resistive leakage current could be used for the diagnosis of the arresters.

• 유기물자원화
• /
• 제32권2호
• /
• pp.15-25
• /
• 2024

본 연구에서는 하수슬러지 필터프레스 공정에서 발생하는 오염 여과포에 대하여 가압수 및 초음파 세척에 대한 재생효율을 평가하였다. 이를 위하여 3톤 규모 하수슬러지 수열탄화물 처리 필터프레스로부터 오염된 여과포를 채취하였다. 먼저, 필터프레스 여과포의 오염 특성을 평가하였다. 오염 여과포의 위치에 따른 공기투과도와 단위질량을 측정하였으며, 새 여과포 측정값과 비교하였다. 다음으로 오염 여과포 전체 면적에 대하여 공기투과도 및 단위질량 분포를 지도화하여 오염 특성을 평가하였다. 마지막으로 오염 여과포를 대상으로 3 bar의 압력 세정 및 34, 76, 120, 168 kHz 주파수의 초음파 세척을 수행하였다. 이때, 여과포의 기공 오염 정도를 3단계로 나누어 세척효율을 평가하였다. 여과포 오염 비교 결과, 기공 오염은 여과물질이 지속적으로 투입, 압착되는 여과포 하부와 양측면 위주로 발생하였으며, 표면 오염은 전체면적에 걸쳐 고르게 나타났다. 가압 세척 결과, 공기투과도는 1.3-3.1%p 증가하였으며, 오염물질은 2.7-4.4% 제거되었다. 초음파 세척결과, 공기투과도는 12.5-61.5%p 증가하였으며 오염물질은 2.7-29.2% 제거되었다. 초음파 세척에서 주파수가 낮을수록 공기투과도 재생율과 오염물질 제거율이 우수하였다. 여과포의 기공 오염 정도가 클수록 초음파 세척 후 공기투과도 향상 및 오염물질 제거 효과가 우수하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.38-43
• /
• 2002

A series of tests were performed to investigate the effects of pH and contamination level on cation exchange capacity and zeta potential in kaolinite loaded with lead. Test results show that cation exchange capacity of kaolinite is found to be in the range from 4 to 20meq/100g and it increased with increasing pH up to the converged number about 20meq/100g over pH 8. And then CEC has a tendency to reduce and converge to zero with increasing the concentration of Pb in the kaolinite surface. Moreover, zeta potential of kaolinite contaminated with lead is found to be in the range from -10 to 5mV, and zero point of charge is measured at about pH 3.5. Zeta potential of kaolinite contaminated with lead decreases with increasing pH values and decreasing Pb concentration of kaolinite.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1461-1470
• /
• 2012

This paper reports the contamination performance of transmission line porcelain insulators tested under five different contaminant conditions - clean and ESDD (equivalent salt deposit density) level (A, B, C, and D) through measurement of their leakage current under drop of potential method. To estimate the contamination for transmission line porcelain insulators, leakage current waveform and its maximum value were measured under step-up power test. In the clean insulators test, % distortion factors decreased with increasing step-up power, and as the ESDD level increased, some characteristics such as frequency analysis, harmonics and % distortion facotor could be used for contamination diagnosis of the transmission line porcelain insulators.