• 지능정보연구
• /
• 제15권3호
• /
• pp.119-136
• /
• 2009

컨테이너 물동량 증가와 컨테이너선의 대형화에 따라서 항만 하역장비는 지속적으로 변화하고 있다. 본 연구는 항만 하역장비 가운데 컨테이너크레인의 기계적 생산성을 상세히 평가하기 위해 개발된 시뮬레이션 모델을 소개한다. 모델은 컨테이너크레인의 메커니즘으로 싱글 및 듀얼 트롤리 방식을, 스프레더 유형으로 싱글, 트윈, 탠덤 방식을 고려하고 컨테이너크레인의 규모와 속도 등에 관련된 세부 사양을 입력받아 기구학적 특성을 구현한다. 또한 외부의 물리적 제약으로 선박의 크기, 컨테이너의 적재위치와 무게를 고려한다. 본 모델은 다양한 입력변수가 파라미터 (parameter)로 분리되어 실험 조건을 편리하게 설정할 수 있으며, 객체 지향적으로 설계 개발되어 향후 새롭게 개발되는 장비 유형이나 기존 장비의 변화를 유연하게 수용할 수 있다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.138-143
• /
• 2005

Recently, it is much more required to approach the accurate shaft alignment analysis according to the tendency of active showing in large container vessel and that of the heavy weight of propeller in connection with it. Shaft alignment calculation lies upon how the pressure apply on bearings properly in operation of main engine and how the stress of shaft puts within that of limit of bearing material and how the movement of shaft is prospected owing to propeller forces and moments. Therefore, we have conducted the shaft alignment calculation of very large container vessel considering the deformation of hull structure and the propeller forces and moments and the static and dynamic condition of shaft. The calculation results show the pressure distribution of aft bush and the movement of shaft in bearing. The shaft alignment calculation helps the stable application of shaft alignment, which was proved in sea trial.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.216-221
• /
• 2005

Many tanks such as a fresh water tank, an aft peak tank and oil tanks are arranged in the engine room and aft part areas of the ship. By added mass effect of the fluid inside the tanks, the natural frequency will be changed according to filling height of the tank. For this reason, there is possibility of occurrence of excessive vibration by resonance between natural frequencies of local structure and excitation frequencies of the propeller or main engine. Therefore, calculation of natural frequencies is required for structure for many types of tank which are contacting with water or oil to consider added mass effect for anti-resonance design at design stage. In this study, a case of structure damage on the fresh water tank for 2600 TEU container vessel is introduced. In addition, natural frequency analysis and vibration measurement have been performed to investigate vibration characteristics for excessive vibration control.

• 대한조선학회논문집
• /
• 제44권3호
• /
• pp.279-284
• /
• 2007

As a container vessel becomes larger, the bow flare becomes larger. The large bow flare structures are often subjected to dynamic pressure loads due to bow flare slamming occurring in rough seas. The aim of this paper is to investigate the characteristics of bow flare slamming pressure measured in a real voyage through the North Pacific Ocean. The characteristics of impact pressure load caused by slamming is addressed in terms of the pressure pulse-time history which involves rising time, peak pressure, decaying time and type of pressure decay. The values were presented using non-dimensional parameters.

• 한국정보시스템학회지:정보시스템연구
• /
• 제33권2호
• /
• pp.125-142
• /
• 2024

Purpose The purpose of this study is to identify and analyze the key factors influencing congestion in the in-out transportation at port container terminals, and to design of a predictive model for in-out congestion based on these analysis. This study focused on architecting a deep learning-based predictive model. Design/methodology/approach This study was conducted through the following methodology. First, hypotheses were established and data were analyzed to examine the impact of vessel schedules and external truck schedules on in-out transportation. Next, explored time series forecasting models to a design the architecture for deep learning-based predictive model. Findings According to the empirical analysis results, this study confirmed that vessel schedules significantly affect in-out transportation. Specifically, the volume of transportation increases as the vessel arrival/departure time and the cargo cutoff time approach. Additionally, significant congestion patterns in transportation volume depending on the day of the week and the time of day were observed.

• 한국해양공학회지
• /
• 제27권1호
• /
• pp.51-58
• /
• 2013

Recently, there has been an increase in the demand for natural gas as a source of clean energy, which has increased the demand for LNG carriers. However, LNG carriers require a capital investment to obtain equipment for the regasification process, which prevents fires and explosions. Thus, on account of NIMBY, a CNG carrier is suggested that eliminates the need for regasification equipment. Meanwhile, carbon dioxide emissions are more and more regulated by international conventions such as the Kyoto Protocol. Because of this, $CO_2$ carriers have also received international attention as a methodology to transport and store $CO_2$ cargoes. Several vessels or tanks to transport and store $CO_2$ gas have been studied in various countries. This paper proposes a conceptual design for a 20ft container shaped tank to effectively transport small cargoes of $CO_2$ and CNG. The proposed pressure vessel or tank will be carried by a conventional containership or special cargo ship. The influences of the design parameters for proposed pressure vessel or tank. Including the materials, scantlings, and shape of the pressure vessel, are studied theoretically and computationally.

• 한국항해항만학회지
• /
• 제33권10호
• /
• pp.723-734
• /
• 2009

최근 컨테이너 선박은 조선 기술의 발달과 세계 경제교역 규모의 급속한 증가에 따라 대형화, 고속화가 빠르게 진행되고 있다. 이에 머지않아 15,000TEU급 컨테이너 선박의 등장이 예상되고 있다. 동북아시아에서는 경제의 글로벌화에 따른 급격한 물류환경 변화에 대응하여 물류 주도권 확보를 위한 물류거점화 경쟁이 치열하게 전개되고 있다. 이에 따라 주요항만에서는 대형 선사를 유치하기 위한 치열한 경쟁을 하고 있다. 이를 위해 본선작업을 신속하고 정확하게 처리하기 위한 노력이 절실히 필요하며 지금까지의 본선계획 시스템은 획기적으로 개선되어야 할 것이다. 그리하여 본 논문에서는 이러한 기존 본선작업의 개선을 위하여 다수의 플래너를 이용한 양?적하 작업계획을 수행하여 보다 신속하고 정확하게 하며, 플래너(Planner)간의 정보공유로 작업계획의 품질을 보다 향상시킬 수 있는 다중분산 본선작업 계획 시스템을 제안한다. 그리고 이의 효율성을 검증하기 위해 아레나(ARENA)를 통한 시뮬레이션을 수행하고자 한다.

• 한국기계가공학회지
• /
• 제9권3호
• /
• pp.62-68
• /
• 2010

In the engineering field, sloshing in rolling vessel is a hot issue because of the connection with ship stability problem. The sloshing phenomena also can be utilized in the field of structure or facility vibration damper. This paper explores the possibility which sloshing of multi-particles can be used to dissipate energy in a rolling container. This energy dissipation can be utilized to the application of rotating damper. Some of the parameters expected to dissipates energy, such as vessel size, particle size, mass fraction and ramp height, have been experimentally and theoretically studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.66.1-66
• /
• 2001

As choosing proper length of boom of container crane according as sort of vessels(18, 22, 24 columns and so on), reinforcing of capacity of DC motor to transport heavy loads, it´s structure being oversized with flexibility and durability, the study is progressing on the automation for convenient operation and effective control. We often cannot but work slowly caused by swaying(pitching, rolling) of vessel. We can get productivity and efficiency by getting over it. The factors of swaying, as fellow; - wave caused by vessels around moving - wind and wave caused by weather change - vessel´s moving by change of load weight - tide - move of vessel According to ...

• 한국항만경제학회지
• /
• 제40권2호
• /
• pp.175-189
• /
• 2024

컨테이너를 이용한 해상운송이 본격적으로 도입되면서 컨테이너 선박의 크기는 꾸준히 증가하고 있다. 선박대형화는 근본적으로 선사가 규모의 경제 실현을 목적으로 추진되는 것이기는 하나, 선박이 기항하는 항만운영 환경에 많은 영향을 미치게된다. 이러한 초대형 컨테이너 선박의 등장에 따른 효율성이 항만의 운영 관점에서 과연 타당한지에 대한 의문이 지속적으로 제기되었다. 이에 본 연구에서는 부산 신항 컨테이너 터미널 사의 내부자료를 이용하여 2022년 1월부터 12월까지의 선박 규모별 효율성을 분석하였다. 분석 대상의 경우 A 컨테이너 터미널의 The Alliance에 가입된 선사별 입항 선박과 B 컨테이너 터미널의 The Alliance 및 2M에 가입된 선사별 입항 선박을 대상으로 하였으며, 투입변수는 선박규모(TEU), 총 접안시간, 순 작업시간을 선정하였고, 산출변수는 해당 컨테이너 터미널 화물처리실적으로 선정하였다. 분석결과 선박 규모별 효율성은 규모가 커질수록 낮은 선형의 컨테이너 선박에 비하여 높은 효율성을 나타내는 것으로 분석되었다.