• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.261-267
• /
• 2006

The required storage inventory is a very important decision variable which determines the storage capacity of a container terminal. Generally, the required storage inventory is dependent upon such factors as ship headway, allowable dwell time of containers, loading/unloading time per ship, and so on. Until now, the required storage inventory is estimated under the assumption that the factors are deterministic in several studies. However, this study proposes how to estimate a required storage inventory satisfying the required service level under the assumption that a containership's load size is probabilistic. Numerical experiments, which use a simulation show that the proposed method can estimate more adequately the maximum storage inventory than other methods under a probabilistic environment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.24-32
• /
• 2021

The size of container ships is increasing to increase the cargo loading capacity. However, container ships are limited in terms of the hull longitudinal strength. To overcome this limitation, brittle crack arrest steel can be used. This study was aimed at examining the influence of the heat input on the welding procedures of flux cored arc welding and submerged arc welding. In the experiment, the crack tip opening displacement test, which pertains to a parameter of fracture mechanics, was performed, and a 3-point bending tester was adopted. Based on the results, the crack measurement method was presented, and the stress expansion coefficient value for the pre-fatigue crack length was derived according to the heat input after the pre-cracking length was measured. It was noted that the heat input affected the crack tip opening displacement of brittle crack arrest steel.

• Proceedings of the KOR-KST Conference
• /
• 1993.07a
• /
• pp.99-105
• /
• 1993

This Article analyses the present situation of Shanghai Harbour and the Harbour's important role in the development of chinese economy. The article forecasts that the yearly tonnage turnover of the port will reach about 200 million tons in the year of 2000, possibly reach to 270--300 million tons by the end of 2020. it also forecasts that the container handling capacity of the port will be 2 million TEUS in 2000 and 6 million TEUS in 2020 respectively. In order to keep pace with the present situation of opening up and developing Pudong new area, this article suggests that the strategic target of the management and development of Shanghai Harbour should be : grasp the opportunity of opening up and developing Pudong, take the building of the deep-waterway port as the main task, which can accept the third or fourth generation international container ships, bring into full play the traditional advantages the Harbour has, unfold the businesses in other fields, participate in the marketing competition, speed up the development of the Harbour itself, make efferts to build Shanghai Harbour into a port-industry-trade-transportation integral modernized international deep-water key port.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2007.10a
• /
• pp.161-173
• /
• 2007

This paper considers the problem of determining the cargo flow and the transportation mode in each trade route while satisfying the demand. Especially, the problem incorporates short sea shipping in Korea, which is becoming more important in order to improve efficiency of Logistics. The objective is to minimize the sum of shipping and inland transportation costs. To solve optimally the problem, this paper employs a linear programming model, which is an operations research technique for optimization. The problem is formulated by extending the well-known network design problem by considering capacity at seaport and limitation of total number of vehicles. The model is solved using CPLEX, a commercial linear program software. The test results using a real cargo flow data in Korea show that the model represents closely the real situation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1446-1449
• /
• 2003

In this study we analyze operation principle of wedge type rail clamp using in the harbor and when wind force applies to container crane, we calculate deformation in each part of rail clamp. As a result of calculation, we will design rail clamp supporter that forbid overload to be applied at rail clamp according to adjust climbing wedge distance of roller. It would be adapted various container capacity and wind velocity.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2461-2463
• /
• 1998

The container crane is more expensive than other cranes, and is designed for efficient use. Since there are more control variables than other crane has more fault factors. Therefore it is important to reduce these factors efficiently and also to increase the capacity to move more freight in due time. To solve the above problems the velocity relation of the motor will be examined. In this paper the velocity relation of the motor will be expressed in a mathematical equations for efficient control.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2567-2568
• /
• 2000

The container crane is more expensive than other cranes, and is designed for efficient use. Since there are more control variables than other crane has more fault factors, Therefore it is important to reduce these factors efficiently and also to increase the capacity to move more freight in due time. To solve the above problems the velocity relation of the motor will be examined. In this paper, the velocity relation of the motor will be expressed in a mathematical equations for efficient control.

• Industrial Engineering and Management Systems
• /
• v.10 no.4
• /
• pp.255-263
• /
• 2011

During the design process of a terminal, the handling capacity of a container yard needs to be evaluated in advance. This study suggests formulas for estimating the expectations and the variances of cycle times for various types of operations of a yard crane. Statistical analysis is used to estimate the expectations and variances. The main focus of this study is to show the impact of interdependencies among handling time elements on the expectation and variance of the cycle times; these interdependencies have not been considered in previous studies. Numerical experiments are done for evaluating the difference in the variance of cycle times and the waiting of trucks between the cases with and without the consideration of interdependencies.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.359-374
• /
• 1994

Process sequence design in sheet metal forming process by the finite element method is investigated. The forming of sheet metal into a washing machine container is used to demonstrate the design of an improved process sequence which has fewer operations. The design procedure makes extensive use of the finite element method which has simulation capabilities of elastic-plastic modeling. A one-stage process to make an initial blank to the final product is simulated to obtain information on metal flow requirements. Loading simulation for a conventional method is also performed to evaluate the design criteria which are uniform thickness distribution around the finished part and maximum punch load within limit of available press capacity. The newly designed sequence has two forming operations and can achieve net-shape manufacturing, while the conventional process sequence has three forming operations. This specific case conventional process sequence has three forming operations. This specific case can be considered for application of the method and for development of the sequence design methodology in general.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.9
• /
• pp.119-126
• /
• 2004

In this paper, we design a wedge type rail clamp which can protect container crane from a sudden strong blast with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine the angle of wedge and analyze a contact condition of roller and wedge so that we might develop a wedge type rail clamp for parking devices of port cargo working system with variable capacity. Therefore, this paper suggests a process to decide wedge angles within feasible range which could be obtained using load analysis and FEA of wedge type rail clamp