• Health Policy and Management
• /
• 제7권2호
• /
• pp.89-108
• /
• 1997

The purpose of this study is to investigate drug information sources which influence physician's prescriptions, and to compare the differences of drugh information sources between private practitioners and hospital physicians. In addition, the ultimate goal of this study is to provide better quality of drug information for both groups of physicians through the professional drug information system. 264 physicians, including general practitioners and all types of specialists who were working in hospitals and private clinics in Taejon and Chungnam area, participated in this study which was conducted by mail. The results are summarized as follows ; 1. Both physician groups received drug informations mainly from medical journals, but there were differences in secondary sources of drug information. Namely, hospital physicians got drug information from annual meetings and textbooks, and private practitioners got it from detail men and colleagues. 2. Drug effect was the first consideration for drug selection in both physician groups. But, in the 2nd consideration, private practitioners concerned about the price, insurance and rebates, but hospital physicians were not. 3. Only 9.2% of the private practitioners satisfied with the sufficiency of drug information, whereas 22.0% of hospital physicians satisfied with it. The most insufficient area of information was drug interaction in both groups and 91.9% of the physicians suggested that a professional drug information system should be introduced. 4. Both physician groups had contacted with detail men frequently. However, it was rare for them to contact with a pharmacist. This phenomenon was more severe in the case of private practitioners. 5. Neither physician groups knew very much about drug informatio centers. However, they would be willig to participate if a professional drug information system were established. Also, they indicated that the information most required was drug interaction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권1호
• /
• pp.51-62
• /
• 1994

The sagittal split osteotomy of the mandibular ramus is a common procedure which has been used in the correction of mandibular deformities for a few decades. Although the technical improvements have increased the reliability and stability of SSRO procedure, the postoperative relapse is imperative and clinically more significant than any other complication. One of the major causes of the relapse is due to the displacement of the proximal segment during SSRO procedure, which is well documented in the literature. Therefore it is important to preserve the original position of the proximal segment during SSRO proced and maxillofacial fixation period. In the case of mandibular asymmetry, if one side of mandible is advanced and the other side of mandible is setback during SSRO procedure, the proximal segment in the advancement site will rotate laterally and the proximal segment in the setback site will rotate medially. For the prevention of the lateral rotation or flaring of the proximal segment in the advancment site. we deliberately fracture the posterior protion of the distal segment in green-stick fashion during SSRO procedure, and there is no need to fix the fractured lingual segment. We fix the two osteotomized bony segments in the buccal cortex area rigidly with adjustable monocortical plates and screws. During SSRO procedure the lingual fracture technique was applied to nine patients with severe mandibular asymmetry who underwent orthognathic surgery in our hospital since march, 1992. These clinical experiencies enable us to find the lingual fracture technique has the following advantages. 1. The proximal segment is displaced minimally. 2. The osteotomized bony segments are contacted intimately. 3. The postoperative relapse and the healing period are decreased.

• Magazine of the Korea Concrete Institute
• /
• 제11권2호
• /
• pp.221-230
• /
• 1999

Corrosion of rebars can occur if there are cracks, moisture and availability of oxygen or carbonation proceeds, chloride penetrates and diffuses in concrete. Once rebars in concrete corrodes, subsequently accompanied with scaling, spalling in concrete cover. As a result of them, the RC structure is seriously deteriorated. In this study, theoretical review and experiments for cathodic protection(CP) have been performed to control corrosion of rebars in concrete contained chlorides and pre-crack. For CP the impressed current system was applied, the protection effect was investigated when rebars was directly contacted with salt water due to crack and open to much chlorides in concrete. In order to investigate the effect of protection, when CP was energized for 1 year, half-cell potential, potential-decay with current density, corrosion ratio, etc. were measured. With the cathodic protection by impressed current system, the depolarized values of all specimen were met NACE Standard, the effect of 34~84% of the ratio of corrosion area and 84~86% of cross-section reduction were calculated.

• Journal of the Korea Computer Graphics Society
• /
• 제6권1호
• /
• pp.11-17
• /
• 2000

We present collision-handling method that includes self-penetration in the case of the colliding between rigid and deformable objects. The collision between objects is detected through the overlap test to the hierarchical structures of the objects. For detecting the collision between the objects at in-between frame, we try overlap test using the structures of a dummy and the rigid objects in addition to the test between the rigid and deformable objects. The dummy object is made from the rigid objects moving direction. When collision occurs, a deformable object must be deformed, as the object doesn't permit penetration. Self-penetration may occur during the object is deformed. It is rapidly detected between the object and a dummy object of another type. The dummy object is made from the object's deformation area between two continuous frames. We constrain the object is deformed until it is self-contacted. Our method can be applied without concerning of the shape of a object.

• Applied Chemistry for Engineering
• /
• 제7권5호
• /
• pp.977-984
• /
• 1996

Liquid-liquid extractions by use of hollow fiber membrane module are fast because of the large surface area per volume. In these membranes, the extractant and feed can be contacted at high speed and two flows are completely independent, so there are no problems with loading and channeling. In this paper, it was investigated the selectivities of extractants for extraction of heavy metals from aqueous solution into organic extractants by using the hollow fiber membrane. To identify the effect of distribution ratio on mass transfer in the membrane, we also compared the distribution ratio with mass transfer coefficient. From these experiments for the system with high distribution ratio, effect of the distribution ratio on mass transfer was weak compare with the low distribution ratio system in the hollow fiber membrane.

• Journal of Korean Society of Water and Wastewater
• /
• 제32권1호
• /
• pp.1-10
• /
• 2018

Recently, interest in the development of alternative water resources has been increasing rapidly due to environmental pollution and depletion of water resources. In particular, seawater desalination has been attracting the most attention as alternative water resources. As seawater desalination consumes a large amount of energy due to high operating pressure, many researches have been conducted to improve energy efficiency such as energy recovery device (ERD). Consequently, this study aims to compare the energy efficiency of RO process according to ERD of isobaric type which is applied in scientific control pilot plant process of each $100m^3/day$ scale based on actual RO product water. As a result, it was confirmed that efficiency, mixing rate, and permeate conductivity were different depending on the size of the apparatus even though the same principle of the ERD was applied. It is believed that this is caused by the difference in cross-sectional area of the contacted portion for pressure transfer inside the ERD. Therefore, further study is needed to confirm the optimum conditions what is applicable to the actual process considering the correlation with other factors as well as the factors obtained from the previous experiments.

• Journal of Korean Society of Water and Wastewater
• /
• 제25권3호
• /
• pp.391-398
• /
• 2011

This study is to develop highly efficient coagulation system(HECS) that runs treatment with a short retention time to cover the overflow in the rain, which coagulation, mixing and settling are contacted in a single reactor and to estimate the applicability. Setting up 100ton/day-size pilot scale plant, the results of continuous operation in case of runoff, maintaining 20 minute-retention time at optimum chemical injection condition(Alum 100mg/L, Polymer 1.0mg/L) shows the highest removal efficiency(Turbidity 93.1%, TCODcr 80.6%, BOD 81.8%, SS 92.5%, TN 72.3% and T-P 87.3%). It was estimated that the large amount of cost for separate sewage system and the size of area for system instruction can be reduced if the HECS is applied for CSOs treatment because the HECS is so compact and quickly. When we see the results, HECS from this study could be able to treat the pollutant quickly within a short retention time only with coagulant and polymer, which could show high applicability.

• Journal of Periodontal and Implant Science
• /
• 제23권2호
• /
• pp.203-218
• /
• 1993

This study was designed to examine the effect of tetracycline application to the planed periodontal surgery of the experimentally induced periodontal disease in dogs. Modified Widman flap surgery was done and aqueous tetracycline (1%) was applied to the root surface for 5min, after which the wound was rinsed with saline, and flaps were coronally repositioned. Root surface ntoches were used as reference points. The animals were sacrificed 1 week, 2 weeks, 4 weeks, and 8 weeks after surgery, and block sections of tooth and surround tissue were processed for conventional light and electron microscopy. The results were as follows : 1. A more coronal position of junctional epithelium was observed in the area treated with tetracycline. 2. In the most of the tetracycline - treated teeth, the new collagen fibrils of connective tissue were oriented vertical/or oblique and parallel to the root surface. The vertical or oblique fibers were inserted into the denuded dentin matrix and contacted with exposed dentin collagen fibrils. 3. In the tetracycline - treated root, new cementum apposition, most of acellular extrinsic fiber cementum, was seen with bundles of oriented collagen fibrils incoporating into the cementum. 4. In the control and tetracyclin - treated teeth, bone resorption was observed at the alveolar crest in the 1 week groups.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제45권5호
• /
• pp.445-453
• /
• 2012

This study examined microbial contamination during seasoned and dried squid Dosidicus gigas processing, including the apparatus, machines, and employee's gloves at each step in processing at two companies. The numbers of bacteria floating in air in each processing area were also examined. The numbers of Staphylococcus aureus (3.6-6.0 log CFU/g) and Escherichia coli (1.3-1.4 log MPN/100 g) in domestic and imported daruma (a semi-processed product of seasoned and dried squid) at companies A and B exceeded the regulatory limits of the Food Sanitary Law of Korea (S. aureus, ${\leq}2.0$ log CFU/g; E. coli, negative). S. aureus in both daruma was reduced to below the detection limit or 3.6 log CFU/g after the roasting step, but increased again to 3.3 and 5.5 log CFU/g after the mechanical tearing step at companies A and B, respectively. E. coli showed similar tendencies at both companies. The surfaces of the apparatus, machines, and employee's gloves that contacted daruma were also contaminated with S. aureus (1.0-5.5 log CFU/$m^2$) and E. coli (negative-to 3.5 log MPN/$m^2$). The numbers of bacteria floating in air were high (1.7-5.1 log CFU/$m^3$) at both companies. These results suggest that sanitation standard operating procedures (SSOP) must be developed to control of microbial cintamination in seasoned and dried squid.

• Journal of Biomedical Engineering Research
• /
• 제34권2호
• /
• pp.73-79
• /
• 2013

Purpose: The purposes of this study were to measure the dose distribution of Photodynamic therapy(PDT) laser with 635 nm wavelength using GafChromic film. Method & Result: We made each output 300 J by changing mW and sec using the laser beam radiation mode such as C.W(Continuous Wave) mode, Pulse mode and Burst Pulse mode and measured the does at 0 mm and 5 mm of distance from optic fiber catheter end to the film, and at 5 mm distance by changing the angle of the end of the optic fiber catheter as $0^{\circ}$ and $0.5^{\circ}$. The radiated film was scanned and OD(Optical Density) was compared. And two-dimensional isodose curves were obtained and the consistency of shapes was compared. It was confirmed that there was consistency between optic density and the dose radiated on the film when we radiated GafChromic film by changing distance and angle of 300 J output in each radiation mode coordinating mW and sec. Conclusion: In this study, we could identify the stability according to changes in laser beam modes, changes in output according to distance, changes in uniformity according to angle, and beam profiles using GafChromic film, and we could also get two-dimensional isodose curve. It was found that small change in the distance and angle that is made when optic fiber catheter was contacted on the treatment area did not make big effects on the output of beam and the uniformity of dose, and it was also found that GafChromic film could be utilized for the purpose of QA of PDT laser beam.