• 자원리싸이클링
• /
• 제7권5호
• /
• pp.41-45
• /
• 1998

간단한 기하학적 원리에 의해 접촉각을 계산할 수 있는 방안을 모색하였다. 접촉각 측정에 일반적으로 이용되는 기기를 사용하지 않고, 단지 고체 표면의 용액 렌즈가 형성하는 접촉원의 지름과 렌즈의 높이를 측정함으로써 상당한 신뢰성을 가진 접촉각의 크기를 계산할 수 있었다. 이 방법의 신뢰성을 확인하기 위하여 동일한 용액 렌즈에 대해 일반적인 접촉각 측정 장치로 접촉각을 측정하여 그 값들을 상호 비교한 결과 오차 한계의 범위내에서 거의 일치함을 확인하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.138-143
• /
• 2000

In order to maintain the faith and accuracy with precision of machinery, it is recently required the precise comprehension about approach which is appeared in the contact area between two bodies, because approach affects the static stiffness and dynamic characteristic of contact area. This study applied H. Hertz's circle contact area theory as much lower measuring force. It is measured approach influenced by various factors which were concerned with contact errors like material, form of two bodies, using calibration tester. As a result, the following conclusion can be obtained. 1) The approach appears greatly in order of carbon steel(SM20C), aluminum(A601-T6) and high density polyethylene(5305E) 2) The approach appears in order of concave, disc, convex form, in the ration of contact area size by the difference of curvature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.139-140
• /
• 2011

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.406-413
• /
• 2021

Objective: The purpose of this study was to investigate effects of taping technique applied to knee instability. Design: Cross sectional study. Methods: Twenty-six participants with knee instabilityparticipated in this study. They were randomly assigned to the Kinesio taping (KT) group (n=13) and the dynamic taping (DT) group (n=13). Both groups applied knee stabilization taping techniques. In order to compare the effects of each taping technique, the change in the landing error scoring system (LESS) and lower extremity joint angle wasrecorded before and after the intervention. Results: Both groups significantly decreased in the change before and after the LESS (p<0.05). At the joint angle of the lower extremities, KT group significantly reduced the valgus angle at the max knee flexion (p<0.05). In DT group knee joint flexion and hip joint flexion angles were significantly increased at foot contact (p<0.05). In max knee flexion, the knee joint flexion angle was significantly increased (p<0.05). In foot contact, max knee flexion, the knee joint valgus angle was significantly increased (p<0.05). DT group showed more significant changes in knee joint flexion angle at foot contact and hip joint flexion angle at max knee flexion. Conclusions: Dynamic taping is a clinically applicable intervention method for lowering the risk of non-contact injury in participants with knee instability and for knee stability during rehabilitation exercises.

• Journal of Welding and Joining
• /
• 제32권6호
• /
• pp.35-40
• /
• 2014

The contact tip for gas metal arc welding has important functions to transmit the welding current to the wire and to guide the wire to molten pool. If the contact tip is damaged, it is a cause of lowering the welding productivity due to removal of welding defects and replacement of contact tip. In case of the use of a contact tip for a long time the arc is unstable because the processed hole in the contact tip center is larger, and the variation of aiming position of the welding wire causes a seam tracking error. In this study, gas metal arc welding experiments using contact tip of three different materials were performed. The contact tips with Cu-P, Cu-Cr, and Cu-ODS were used at the experiments, and the welding characteristics by each contact tip were evaluated. After welding contact tip appearance, welding spatter adhesion amount of the nozzle, and weld bead appearance were evaluated. The welding current and welding voltage were measured to verify arc stability during arc welding.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.473-474
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.3-4
• /
• 2007

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2194-2200
• /
• 2002

Transmission error is highly related to gear noise. In order to predict the helical gear noise, transmission error analysis is needed. Up to now, the studies for the transmission error were conducted by the modeling of helical gears only. However, since helical gears are supported by the shaft and bearing, transmission error has the effects of the elements. In this study, the procedure to consider the shaft deformation with bearing stiffness for the transmission error analysis is proposed. To do so, the relationship between gear error and shaft deformation is analytically derived. Shaft deformation with bearing stiffness is analyzed by FEM. It is measured in the experimental test rig by the non-contact displacement sensors. Using the tooth error from tooth modification and the shaft deformation, the effects of shaft on the loaded transmission error are investigated.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1442-1449
• /
• 2016

This paper proposes a diagnosis to detecting poor contact fault and fault location. Electrical fire by poor contact fault of power cable occupied a large proportion in the total electrical installations. The proposed method has an object to prevent electrical fault in advance. But detecting poor contact fault is difficult to detect fault type and fault location by using conventional reflectometry due to faults generated intermittently and repeatedly on the time change. Therefore, in this paper poor contact fault and fault conditions were defined. System generating poor contact fault produced for the experimental setup. SSTDR and algorithm of reference signal elimination heighten performance detecting poor contact fault on live power cable. The diagnosis methods of signal process and analysis of reflected signal was proposed for detecting poor contact fault and fault location. The poor contact fault and location had been detected through proposed diagnosis methods. The fault location and error rate of detection were verified detecting accuracy by experiment results.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.661-667
• /
• 2011

접촉식 측정 프로브는 3 차원 좌표 측정기 및 CNC 공작기계 등에서 제품 검사에 많이 활용되고 있고, 최근 품질 향상을 위한 가공 및 검사장비의 고정도화에 따라 측정의 정확도도 또한 매우 중요시 되고 있다. 이에 따라 스트레인 게이지 등을 이용한 고정도의 측정 프로브가 사용되고 있기는 하지만, 본 연구에서는 경제적인 측면을 고려하여 산업현장에서 공작기계에 많이 활용되는 일반 접촉식 측정 프로브의 메커니즘을 이해하고, 측정 시 발생할 수 있는 프로빙 오차에 대한 분석 및 보정을 통하여 그 활용성을 높이고자 하였다. 이를 위하여 스타일러스 반경 및 중심 정렬오차가 규명되었고, 3 차원 공간상의 측정 좌표에서 프로빙 오차에 대한 해석이 이루어졌다. 이러한 오차들을 보정하기 위한 알고리즘이 개발되었으며, 실제 CNC 공작기계 상에서 기준구 측정을 통한 검증이 이루어졌다.