• KSBB Journal
• /
• v.18 no.3
• /
• pp.211-216
• /
• 2003

The removal yield of dissolved organic matter in drinking water by biological activated carbon (BAC) process was investigated. The tested processes wer raw water-AC process (BAC1), raw water-ozonation-BAC process (BAC2), and raw water-ozonation-coagulation/sedimentation-BAC process (BAC3). The amounts of organic matter was measured as dissolved organic carbon (DOC), ulta-violet radiation at 254 nm wavelength ($UV_{254}$), total nitrogen (T-N), ammonia nitrogen (NH_3$-N), and total phosphate (T-P). As a results, 30.7% DOC was removed by BAC2 process, which showed higher removal efficiency than BAC1 or BAC3 processes. The removal yield of $UV_{254}$ in BAC1, BAC2, and BAC3 processes were observed as 45.3%, 44.6%, 58.4%, respectively. And the removal yield of ammonia nitrogen were 66%, 81%, 29% in each BAC processes. The optimal empty bed contact time (EBCT) of BAC processes was estimated as 10 minute. This study has shown that BAC process combined with ozone treatment was efficient for removing dissolved organic matter in water.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2001

The charnockite of Jirisan area occurs within the Precambrian high grade metamorphic terrane associated with anorthosite body as many foreign examples. Sm-Nd ages were determined from whole rock-garnet pairs, which turned out $1827\pm$32($2\sigma$) Ma for the massive charnockite and $1820\pm$22(2$\sigma$) Ma for the foliated charnockite with $$\varepsilon$_{Nd}(T)$ of $-5.5\pm$0.2 and $-6.0\pm$0.5 respectively. $^{87}Sr/^{86}Sr$ initial ratios calculated with the these ages are 0.71319 and 0.71532 respectively. The fact that massive and foliated charnockites show identical age, identical Nd isotopic initial ratio, and similar Sr isotopic initial ratios suggest that they were generated at the same time from the same material even through their present textures are different. Initial ratios of Nd and Sr of the charnockites are quite distinct from the mantle values indicating the influence of continental crust. Sm-Nd age determined from the titanium bearing anorthositic rocks intruding the anorthosite body, using mineral separates of garnet, plagioclase, and mafic fraction, is $1792\pm$90(2$\sigma$) Ma with $$\varepsilon$_{Nd}(T)=-3.9$\pm$0.2$. The ^${87}Sr/^{86}Sr$ initial ratios calculated with this age are 0.70616~0.70619. The charnockites and the anorthositic rocks occurring in contact each other also reveal the same age within the error, which suggest a genetic relationship between them. However, chemical compositions of the charnockites and Hadong-Sancheong anorthosites cannot be explained by igneous differentiation. Their differences in Nd and Sr initial isotopic ratios indicate different source materials. Therefore, temporal association between them suggests the possibility of the anorthosite acting as a thermal source for the generation of the charnockite as other studies.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.200-204
• /
• 2001

Persimmon (Diospyros kaki. cv. Fuyu) fruits were packaged under different conditions, and then stored at $0^{\circ}C$ for 21 weeks. The tried packages were heat-sealed bag of one fruit, heat-sealed bag of five fruits, and tie-sealed bag of five fruits, which used films of three different thickness (0.03 ㎜, 0.05 ㎜ and 0.06 ㎜). Throughout the storage, package free volume, package atmosphere and quality were measured. Package free volume decreased with time with higher rate for heat-sealed bags, in which close contact between fruit and the film was eventually reached in longer storage. However, tie-sealed bags maintained the levels of stabilized free volume. The rate of free volume decrease was faster with thinner film and larger bag size for the packs sealed by the same method. Package atmosphere covered $O_2$ concentration of $1.1{\sim}17.1%$ and $CO_2$ concentration of $1.1{\sim}8.3%$, $O_2$ concentration decreased during storage, whereas $CO_2$ increased. Thinner film package created the internal atmosphere of higher $O_2$ and lower $CO_2$ concentrations. Tie-sealed bags of 5 fruits in the films of 0.05 mm and 0.06 mm thickness maintained the equilibrated package atmosphere of $1.1{\sim}3.0%\;O_2$ and $4.0{\sim}5.5%\;CO_2$, which preserved the fruits best in terms of firmness and less physiological changes of flesh browning and peel browning. At five fruit heat-sealed bag in the films of 0.06 mm thickness with $CO_2\;8.3%$, flesh browning occurred at a high rate, whereas all treatments in the film of 0.03 mm thickness with high $O_2$ and relatively low $CO_2$ contents, flesh and peel browning rates were high.

• Journal of Korean Academy of Nursing
• /
• v.24 no.2
• /
• pp.264-277
• /
• 1994

In Korea the concept of social support was first used as a research concept in nursing and has not had much application in the clinical field. Another problem is that research on social support has used a direct translation of the words “social support” into Korean as “sawhejuk jiji”. Three questions were posed to direct the re-search. 1) Is there a concept of social support in Korean society? 2) if so, what words or expressions are used to de-scribe it? 3) further, if so, how is social support structured and how does it function? In order to answer the research questions a three-step research methodology was used : The first step consisted of a literature review on re-search related to social support and on information on the background of, and the way of thinking re-lated to interpersonal relations among Korean people. The second step, which was done to identify whether there is a concept of social support in korean society, involved interviewing a sample of the population. The third step involved a panel discussion that included the members of the research team and three consultants, a sociologist, a philosopher and a scholor in korean literature. A review of the literature on interpersonal relationships in traditional korean society identified a four cirole structure that explains interpersonal relationships. The first circle with “me” at the center is the family but here “me” disappears into the “we” that is essential for a cooperative agricultural society. In the second circle are those close to “me” but outside the family. The third circle includes those with whom “I ” have infrequent but regular contact and with whom correct conduct is important. The last circle is all the people with whom “I” have nothing in common. They are excluded in interpersonal relationships. The literature on interpersonal relationships showed that within the traditional Korean society people lived in villages where most people were very familiar with each other. “Yun”, the social network established the connection and “Jung”, the feeling of affection increased with time as the connection was strengthened. In the traditional village psychological support was provided through “Mallaniki”, “Pumashi” and “Kae” with the latter two also providing material support. In modern Korea there are more informal and formal social networks, like social services and community activities on the formal level and cultural and leisure groups along with “kae’s on the informal level. But even with this modern variety of groups, most social support comes from informal networks that resemble the traditiorlal “Pumashi”, “Kai” md “Mallaniki”. The six member research team interviewed 65 people in order to identify whether there is a concept of social support and then analysed their responses. There were 20 different words describing the reception of the social support and these could be grouped into seven major categories : virtuous, fortunate, helped, supported, blessed, attached(receiving affection) and receiving (grace) benevolence. there were 27 words describing the act of social support which could be categorized into seven major categories : love, looking after, affection(attachment), kindness(goodness), faith, psychological help and material help. for the meaning of social support translated as “sawhe juk jiji” there were a total of 14 different answers which could be categorized into 3 major categories : help, agreement, and faith. In third step, the results of the literature review and the answers to the questions were discussed in a pannel. The results of the discussion led to the following definition of social support in Korea which is shaped like a the four sided pyramid on a base. Social support is the apex of the pyramid and four sides are made up of : “do-oom” (both emotional and material help), “jung” (connectedness, or relationship bound by affection, regard or shared common experience ), “midum” (faith or belief in), “eunhae” (kindness or benevolence). The research team identified “Yun”( the basic network of relationships) as the base of the pyramid and as such the foundation for the components of social support in Korean culture. On “Yun” rest the other four components of social support : “Jung”, “Midum”, “Do-oom”, and “Eunhae”, For social support to take place there must be “Yun”. This is an important factor in social support. In private social network “Jung” is an essential factor in social support. But not in the public social network. “Yun” is a condition for “Jung” and “Jung” is the manifestation of support.

• Korean Journal of Health Education and Promotion
• /
• v.18 no.1
• /
• pp.109-125
• /
• 2001

The purpose of this study was to provide the basic data for establishing school education environment protection measures, on the basis of comparing and analyzing the realities and students' recognition degree of the environment and hygiene around the middle and high schools located in the rural areas. These study data were investigated by the self-administered questionnaires, taking as subject the 805 students in the middle and high schools located rural areas. And the results were as follows: First, as the result of having investigated the distribution degree of harmful environment within the purification zone around schools, it was found out that students responded: within the purification zone around the middle school, there were cartoon rooms (46.2％), electronic game rooms (45.9％), and singing rooms (45.0％). within the purification zone around the high school, there were electronic game rooms (46.3％), singing rooms (42.3％), billiard halls (41.4％), PC rooms (40.1 ％), and Soju-room (35.2％). Secondly, as having analyzed student's recognition degree of the harmful environment around the school, it was found out that middle school students responded that sexual utensils-treating shops (3.74 points) were most harmful, and next corrupted bathhouses (3.52 points), and Soju-room (3.47 points), and high school students also responded relating to harmfulness in a similar sequence. Thirdly, in case of students' recognition degree of the harmful environment around the school according to general characteristics, 1) girl students had a higher ratio of recognition that the environment around the school was harmful than boy students (p〈0.001). 2) groups of students whose living standard was high had a higher ratio of recognition that the environment around the school was harmful than groups of students whose living standard was low (p〈0.05). 3) groups of students whose school was located near the park or the residential street had a higher degree of recognition that the environment around the school was harmful than groups of students whose school was located near the factory or the shopping area (p〈0.01). 4) groups of students whose school was located near the park or the residential street had a higher degree of recognition that the environment around the school was harmful than groups of students whose school was located near the amusement area or the shopping area (p〈0.05). Fourthly, 1) relating to the harmful shops where they experienced most highly the behavior of drinking and smoking, middle school students responded that they did so in the electronic game room (22.5％) and high school students did so in the singing room (31.4％), and high school students had a very high experience ratio of drinking and smoking, compared with middle school students (p〈0.001). 2) relating to the harmful shops where they could get in contact with lewd articles, both of middle school students (5.3％) and high school students (8.3％) responded that they could do so in the video room. 3) relating to the harmful shops where they experienced unsound opposite sex acquaintance, both of middle school students (5.8％) and high school students (16.6％) responded that they did so most highly in hotels, and high school students had a remarkably high experience ratio of unsound opposite sex acquaintance, compared with middle school students (p〈0.05). 4) relating to the harmful shops where they experienced violence, middle school students responded that they did so in the electronic game room (14.0％) and then in the singing room (3.7％), and high school students responded that they did so in the electronic game room (9.3％), the nightclub (4.6％), Soju-room (4.1 ％), and high school students had a remarkably high experience ratio of violence, compared with middle school students (p〈0.05). 5) relating to the harmful places where they experienced drugs both of middle school students (0.8％) and high school students (2.4％) responded that they did so in the hotels. Fifthly, when going to the harmful shops, students had the experience of being guided and regulated roughly 1 time - 2 times, and middle school students (16.4％) and high school students (16.7％) had almost similar experience ratios of being guided and regulated. Conclusively, there was a limit in controlling the environment and purification zone only by legal regulations and institutional controls, the self-control purification effort for the school and the surrounding environment was required greatly, in order to protect students from harmful environment. In addition, the constant study to establish the educational environment purification measures must be carried out.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.69-81
• /
• 2015

Under the premise that parks have been a performing field of welfare ideology that benefits the citizen from the past, the present study began with a basic question on what substance a park has and how it has worked. Therefore, this study tried to find out the theoretic background that can explain the roles of a park as an instrument for welfare, of which topic is currently being discussed, and examine how the ideology in the debate regarding welfare characteristics of parks are differentiated from those of social welfare. In addition, this study divided the process of development of parks defined by Galen Cranz in an attempt to view how welfare benefits offered by parks have changed in their development and looked into the roles and types of welfare functions that parks provided to the citizens under a certain social situation by period. Furthermore, the characteristics and development of the ideology underlying a welfare park were examined by function and element in its progression. The results of this study are as follows. The functions that parks have performed so far can be classified into three categories. First, they have a remedial function. Parks have given direct services to 'the socially disadvantaged' such as relief, fostering, and rehabilitation. Second, parks have played a preventive function. They aim to reinforce the functions of individual, family, group, and community. Third, they have exerted a developmental function. They function to promote change of society in a way for it to contribute to social development. Looking into the roles and functions of parks from the perspective of their beneficiary class and benefits, the following were discovered. First, the beneficiaries of welfare characteristics in parks have expanded to the general public from the poor class, and the benefits of parks have spread into the public including the underprivileged in a real sense. Second, the significance of welfare characteristics in parks has also changed from literal benefits to caring for basic human rights. Third, the purpose of welfare characteristics in parks has changed from providing minimal conditions to optimal conditions. At its beginning, the ideology of welfare in parks remained ideal, confining itself to their idealistic characteristics; but as time went on, they created several social benefits in response to various social demands, developing into a field where welfare ideology manifests and is realized in an active manner. Furthermore, it was witnessed that the parks and welfare of the present times are standing at the point of contact for participation and universal well-being. The present study reconsidered the meaning and value of parks from perspective of them as a provider of welfare benefits as well as examined how the welfare ideology of parks is connected to practice. By doing so, this study discovered the various roles, values, and ideology that parks should bear in the future. Therefore, this study is expected to be a good example for future research related to the topic.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.491-498
• /
• 2009

We studied to develop high-efficiency removal system of odor and VOCs(Volatile Organic Compounds) from environmental infrastructure facilities and oil refineries, painting facilities and so on. It can replace RTO and RCO. We tried an removal experiment for VOCs (toluene, xylene, benzene, MEK(methyl ethyl ketone), ethanol, formalin etc. and odor compounds (hydrogen sulfide, etc.). In process, as pre-treatment we used the scrubber with vortex flow (Multi-scrone) to remove the hydrophilic VOCs and as post-treatment, used fibrous bio-filter to remove the hydrophobic VOCs. This hybrid system remove with high efficiency both the hydrophilic VOCs and hydrophobic VOCs. And we tried to make this system to be compact. In experiment using Multi-scrone, contact time is 2~3 seconds and absorption scrubbing water is diaphragm-type electrolysis water. hydrophilic VOCs like ethanol and relatively hydrophilic odor compounds like hydrogen sulfide is excellent, these substances has been removed almost completely, respectively 95~99%, 93~97%. And for MEK, formalin also Showed a high removal efficiency, respectively 78~90%, 72~85%. But in experiment using Multi-scrone, the hydrophobic VOCs like BTX showed a low removal efficiency, respectively 16~22%, 12~18%, 8~16%. In hydrophobic VOCs, toluene removal experiment using fibrous bio-filter, early efficiency was low but after 10days, adaptation period showed high efficiency 85~95%. but in the mixed phase, toluene and MEK efficiency reduced 5~10%. this show microorganism treat first MEK easy to remove. The removal efficiency for MEK using the fibrous biofilter was stable, 80~92%. This hybrid system is also high economical efficiency for RTO. This system reduce more than 50% the cost of equipment and maintenance. As a result, we expect this technology is in the limelight as high efficiency treatment of VOCs in mid-low price.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.357-368
• /
• 2003

Time-series CTDT (Conductivity/Temperature/Depth/Transmissivity) were obtained at one point near tidewater glacier of Marian Cove (King George Islands, Antarctica) to present water column properties and SPM (suspended particulate matter) dispersal pattern in relation with tide, current, meteorological data, and SPM concentration. Four layers were divided from the water column characteristics measured in the interval of an hour for about 2 days: 1) cold, fresh, and turbid surface mixed layer between 0-20 m in water depth, 2) warm, saline, and relatively clean Maxwell Bay inflow between 20-40 m in water depth, 3) turbid/cold tongue of subglacial discharges compared with the ambient waters between 40-70 m in water depth, and 4) cold, saline, and clean bottom water beneath 70 m in water depth. Surface plume, turbid freshwater at coastal/cliff area in late summer (early February), had the characteristic temperature and SPM concentration according to morphology, glacial condition, and composition of sediments. The restrict dispersion only over the input source of meltwater discharges was due to calm wether condition. Due to strong wind-induced surface turbulence, fresh and turbid surface plume, englacial upwelling cold water, glacier-contact meltwater, and Maxwell Bay inflow was mixing at ice-proximal zone and the consequent mixed layer deepened at the surface. Large amount of precipitation, the major controlling factor for increasing short-term glacial discharges, was accompanied by the apparent development of subglacial discharge that resulted in the rapid drop of salinity below the mid depth. Although amount of subglacial discharge and englacial upwelling may be large, however, their low SPM concentration would have small influence on bottom deposition of terrigenous sediments.