• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.239-257
• /
• 2008

Double-sided punched metal plate timber fasteners present projections on both sides, which offer improved joint fire resistance and better joint aesthetics. In this paper, 3-D nonlinear finite element models were developed to simulate double-sided nail plate fastener timber joints. The models, incorporating orthotropic elasticity, Hill's yield criterion and elasto-plasticity and contact algorithms, are capable of simulating complex contact between the tooth and the timber and between the base plate and the timber in a fastener. Using validated models, parametric studies of the double-sided nail plate joints was undertaken to cover the tooth length and the tooth width. Optimal configuration was assumed to have been attained when increase in nail plate tooth width did not result in a raise in joint capacity, in conjunction with the optimum tooth length. This paper presents the first attempt to model and optimise tooth profile of double-sided nail plate fastener timber joints, which offers rational designs of such fasteners.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.110-113
• /
• 2002

As a preliminary study for the three dimensional failure analysis of composite joints, the three dimensional stress analysis on a pin-loaded unidirectional-fabric hybrid composite joints are performed. The contact and frictions between composite plate and metal bush are considered in the finite element method by NASTRAN. Experiments are conducted to validate the accuracy and feasibility of the finite element technique for 25 specimens with 5 different geometries. The finite element and experimental results show the bush cap induces the unsymmetric deformation, stress distribution, and failure behavior through the thickness. The experiment also shows the failure loads are higher in the joint with bush cap than without it.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.114-123
• /
• 2007

We are going to propose equations for stable static and endurance strength design of driveshafts. It is very important to decide the contact normal stress of internal components of CV joints. We can estimate the strength, torque capacity, endurance life of CV joints from contact normal stress by presented equation in this paper. Besides it can be shown the equation for shaft design.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.15-16
• /
• 2015

According to 2014 fire statistical yearbook in the National Fire Data System, a main cause of fire is electrical fire except carelessness fire. Joint/contact badness is the one of the main cause of electrical fire. Furthermore, power relays which are used in electric panel board, motor control center and automation controller, are main element of automation system in the industry field. Overload, voltage unbalance and open-phase due to joint/contact badness of terminal make electric accidents or electrical fires. In order to prevent joint/contact badness of terminal, this paper proposes a sensing circuit of chattering, tracking, arc current, voltage unbalance and open-phase etc. Some experimental tests of the proposed apparatus confirm practicality and validity of the theoretical results.

• 한국항공우주학회지
• /
• 제46권10호
• /
• pp.856-867
• /
• 2018

본 논문에서는 X-밴드 대역의 하향 링크 시스템을 사용하는 2기의 저궤도 위성이 지상국으로 각각의 영상 데이터를 동시에 전송하는 이중 교신 위성 시스템 상황에서 공간 다중화 MIMO 기법의 적용 가능성을 제안한다. 2기의 위성이 2기의 지상국 안테나의 지향각 내에 위치하면서 각각의 영상 데이터를 동시에 지상국 안테나로 송신하는 경우 각각의 위성은 상대 안테나 이득에 따라 위성 상호 간 간섭으로 작용하며, 이는 추가적인 간섭 완화 조치 없이는 성능 저하를 초래할 수 있다. 이러한 성능 열화를 완화시키고자 공동 복조를 위해 공간 다중화 MIMO 기법을 적용하였다. 특히 지상 안테나에서 두 위성 간의 각도 차이에 의해 결정되는 상대 안테나 이득은 이중 교신 위성 시스템을 모델링하는데 있어서 중요한 역할을 한다. 안테나 이득의 수학적 모델로부터 계산된 안테나 이득을 포함한 MIMO 채널의 조건수 분석을 이용하였다. 모의실험 결과를 통해 ZF-SIC, MMSE-SIC 및 ML과 같은 다양한 검출 기법을 이용한 공간 다중화 MIMO 기법을 이중 교신 위성 시나리오에 적용할 수 있음을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1742-1745
• /
• 1997

We have developed a highly responsible probing system for inspection of electrical properties of assemble PCB$_{s}$ (printed circuit boards). However, as the duration of the impact occurring between a probe and a solder joint on PCB is very short, it is very difficult to control the harmful peak impact force and the slip motion of the probe to sufficient level only by its vorce feedback control with high gains. To overcome these disadvantages of the prototype, it needs ot obtain some information of the solder joint in advance before the contact. In addition, to guarantee the reliability of the probing task, the probing system is required to measure several points around the probale target point at high speed. There fore, to meet such requirements, we propose a new noncontaet sensor capable of detecting simultaneously position and normal vectors of the multiple points around the probable target point in real time. By using this information, we can prepare a control strategy for stable contact motion on impact. In this paper, we described measuring priniciple, design, and development of the sensor. The effectiveness of the proposed sensor is verified through a series of experiments.s.

• 폴리머
• /
• 제24권1호
• /
• pp.23-28
• /
• 2000

Solvent 용접에 따른 무정형 고분자 폴리스티렌/폴리스티렌 계면의 접착강도의 변화를 butt joint실험을 통하여 살펴보았다. 폴리스티렌과 용해도 상수가 유사한 용매를 계면에 코팅함으로써 계면 분자쇄의 유동성 증가와 계면의 거침정도의 변화에 따른 접촉표면의 증가로 인하여 접착 강도가 증가함을 확인하였다. 사용용매의 비등점이 접착온도보다 높은 경우, 접착강도의 증가는 용매에 의한 분자쇄의 유동성 증가에 기인되는 반면 용매의 비등점이 접착온도에 비해 낮을 경우 접착강도의 증가는 용매에 의한 접촉표면의 증가에 의존함을 알 수 있었다. 접착온도가 높을수록, 접착시간이 길어질수록 접착강도는 증가되며, 사용용매가 접착강도에 미치는 영향은 감소함을 알 수 있었다.

• 한국운동역학회지
• /
• 제16권2호
• /
• pp.153-163
• /
• 2006

The purpose of this research was to analyze kinematic variables that appear during the instep shooting motion of female high school soccer players according to the angle of approach to find effective shooting motions. For this experiment, 5 female high school soccer players from the K city were participated in this study as the subject group, and as a through comparison and analysis of the resulting numbers of the variables, we came to the following conclusions. 1) Stride length and stride length/lower extremity length increased as the angle of approach increased. 2) As for C.O.G movement displacement, it was highest at an approach angle of $90^{\circ}$ during Right Foot Contact, at $135^{\circ}$ during Left Foot Contact, at $0^{\circ}$ during Rigth Toe Top, at $45^{\circ}$ during Impact, and at $0^{\circ}$ during Follow through. 3) The time required for each phase was longest at APP and shortest at BSP. The time required increased a little as the angle of approach increased, and the total time required also increased as the angle of approach increased. 4) The angle of the ankle joint was largest at an approach angle of $45^{\circ}$ for all events except Right Foot Contact. 5) The angle of the knee joint was largest at an approach angle of $135^{\circ}$ during Right Foot Contact, at $0^{\circ}$ during Left Foot Contact, at $45^{\circ}$ during Right Toe Top, at $135^{\circ}$ during Impact, and at $90^{\circ}$ during Follow through. 6) The angle of the hip joint was largest at an approach angle of $90^{\circ}$ during Right Foot Contact, at$0^{\circ}$ during Left Foot Contact, at $0^{\circ}$ during Right Toe Top, at $90^{\circ}$ during Impact, and at $0^{\circ}$ during Follow through.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.123-137
• /
• 1998

The finite deformation with self contact problem of C. V. joint boots is analysed by using the implicit finite element code ABAQUS/Standard. It is shown that analysis results have a good agreement with experimental ones to the degree of maximum rotation angle. As an application of design modification, the effects of thickness change of the rounded part of boot model on the bending and the contact situation of deformed geometry are investigated. In this paper, the effect of the design modification in the end on the leakage is examined using 2-D finite element simulation. To solve the leakage problem of grease, the length of the small end is enlarged. From this study, it is confirmed that we can save the cost and time by applying FEM techniques to analyze and design the boot model.

• 대한물리의학회지
• /
• 제5권1호
• /
• pp.53-61
• /
• 2010

Purpose : The purpose of this study is to compare the distribution of foot pressure, knee and ankle joint angle between treadmill walking and ground walking in normal person. Methods : 18 Person of subject has participated this study, let subject to walk in ground and treadmill in order to gain data of foot distribution and knee, ankle joint angle using by parotec system. and Dartfish system. Walking velocity was constrained by 2Km/h and more 10sec. Date analysis was used by paired-t test using SPSS/PC statistical programs for window. Results : Result show that total contact times has shown symmetry between both legs, and more increase of left foot pressure in treadmill walking. Foot pressure of treadmill walking was significantly decreased in right hind foot and fore foot and hallux area. The ankle joint angle of treadmill walking was significantly decreased in initial contact phase. Conclusion : Results of this study show that foot pressure of treadmill walking was more decreased than ground walking in right hind foot and fore foot, hallux area. And the ankle joint angle of treadmill walking was significantly decreased in initial contact phase.