• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.475-477
• /
• 2010

In the power saving mechanism specified in IEEE 802.11, all node use the sam ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes the efficient power management mechanism considering network characteristic in 802.11. To reflect the network characteristic, the paper uses th (m,k)-firm deadline technique. Simulation result shows that proposed mechanism outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.151-160
• /
• 2010

Particles emitted from three coal-fired power plants burning bituminous and sub-bituminous coals were examined for PM and size fractions PM>2.5 and PM2.5. The ratio of PM2.5/PM was ranged from 10 to 62%, and PM emission increased with the amount of coal feed, which was 7.23~15.66 kg/h. The emission range of PM2.5 from three power plants was 1.24~4.48 kg/h (dry), which was function of the mixed rate of viscous sub-bituminous coal in feed. Of course such effect should be examined by further tests in details. Based on the consumed coal and thermal load, the emission factors averaged were shown as 59.03 g-PM/ton-coal, 14.79 g-PM2.5/ton-coal and 22.51 g-PM/MWh, 5.54 g-PM2.5/MWh, respectively.

• Journal of Communications and Networks
• /
• v.12 no.4
• /
• pp.334-345
• /
• 2010

In this paper, we study optimal tradeoffs of achievable throughput versus consumed power in wireless ad-hoc networks formed by a collection of multiple antenna nodes. Relying on adaptive modulation and/or dynamic channel coding rate allocation techniques for multiple antenna systems, we examine the maximization of throughput under power constraints as well as the minimization of transmission power under throughput constraints. In our examination, we also consider the impacts of enforcing quality of service requirements expressed in the form of channel coding block loss constraints. In order to properly model temporally correlated loss observed in fading wireless channels, we propose the use of finite-state Markov chains. Details of fading statistics of signal-to-interference-noise ratio, an important indicator of transmission quality, are presented. Further, we objectively inspect complexity versus accuracy tradeoff of solving our proposed optimization problems at a global as oppose to a local topology level. Our numerical simulations profile and compare the performance of a variety of scenarios for a number of sample network topologies.

• Plant Journal
• /
• v.17 no.2
• /
• pp.48-53
• /
• 2021

In the case of a 900 MW combined cycle power plant, most of the load on the site is a rotating device and is operated at a low power factor, and the power factor decrease increases the reactive power, which causes the efficiency of the device to be consumed and unnecessary unnecessary power consumption. This study intends to present the results by installing and operating a reactive power compensation device that absorbs and removes reactive power, which is a solution to this problem, on a 6.9 kV on-board bus. As a result of application of this system, first, it was confirmed that the power factor of the rotating machine was improved to 0.22 and the load power in the house was reduced by 1.4%, and the thermal efficiency of the generator was increased by 0.1% and the power generation power by 810 kW. Next, it was confirmed that the cost of construction and operation can be reduced in the future due to economic feasibility, with a decrease of 200 million won/year in electricity loss compared to 1.5 billion won in investment, an increase of 1 billion won/year in sales, and a one-year capital recovery period.

• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.217-224
• /
• 2009

In this study, four plants grown naturally in Egypt that are usually consumed by pastoral nomads were screened for their total phenolic contents, antioxidative, and anti-$\alpha$-amylase activities. Dried powder of plant's part was extracted in absolute or 70% ethanol. A polar extract of Panicum turgidum (PTPE) had the highest total polyphenol content {92.5 mg gallic acid equivalents (GAE)/g}, followed by an alkaloid extract of Withania somnifera (WSAlk; 77.5 mg GAE/g), and an ethanol extract of Leptadenia pyrotechnica (LPEE; 59.1 mg GAE/g). By employing different assays such as DPPH radical scavenging, reducing power, $Fe^+$ chelating, $H_2O_2$ scavenging and total antioxidant capacity, it was shown that PTPE, WSEE (ethanol extract of W. somnifera), WSAlk and LPEE had promising antioxidant activity, though, their potency varied according to the different tests. WSAlk had the highest level of $\alpha$-amylase inhibition (40.2%) in vitro, followed by WSEE (30.5%). Therefore, it can be concluded that these plants, especially extracts of PTPE, and WSAlk are beneficial to physiological health, and could be used in food and pharmaceutical industries to prepare dietary supplements, functional foods or food preservatives.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.69-76
• /
• 2010

This study was conducted to develop an index of fuel consumption to rate agricultural tractors by their fuel efficiencies. The fuel consumption index consisted of two components: basic and operational indexes. The basic index is to consider an average amount of fuel consumed by engine when it transmits 20 and 100% of the rated power. The operational index is to consider the fuel consumed by tractor for typical field operations: plowing, rotavating, and the remains. The equations and procedures to obtain these indexes were proposed. The method and fuel consumption rate to classify tractors into 5 grades were also proposed. The best 15% of the tractor models were rated as the first grade, 20% as the second grade, 30% as the third grade, 20% as the fourth grade, and 15% as the fifth grade in order of fuel efficiency. Using the fuel consumption index, the classification was conducted on 143 tractor models tested at the National Institute of Agricultural Engineering from 2000 to 2007. The proposed 5-grade system of classification using the fuel consumption index could be used to rate the fuel efficiency of 20-100 kW tractor models produced over past 10 years in Korea.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2010

Recently, wireless sensor networks(WSNs) technology has been considered as one of the most critical issues in the ubiquitous computing age. The sensor nodes have limited battery power, so they should consume low energy through their operation for the long-lasting lifetime. Therefore, it is essential to use energy efficient routing protocol. For this, we propose a location-based energy-efficient routing protocol which constructs the energy efficient route by considering the quantity of Energy consumed. In addition, we propose a route reconstruction algorithm to handle the disconnection of message transmission. Finally, we show from performance analysis using TOSSIM that our protocol outperforms the existing location based routing protocols in terms of energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.694-702
• /
• 2009

Geographical routing protocol, where nodes only need local information exchange to make routing decisions, is a very efficient routing scheme for wireless sensor networks in scalability. However, pure geographical routing does not take account of wireless link condition. If wireless link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose geographical routing scheme considering wireless link condition, where reliable data transmission is made and the consumed energy is minimized.

• Nutritional Sciences
• /
• v.8 no.3
• /
• pp.189-195
• /
• 2005

To assess the effect of pinitol supplementation and strength training for two weeks on the anaerobic capacity during and after exercise, and improvement of glucose metabolism during the recovery period of muscular fatigue with repeated acute bouts of cycling exercise, a total of 24 healthy young men were recruited and randomly and equally divided into three groups; pinitol supplementation group (PSG), placebo group (PLG), and control group (CON). Using a randomized double-blinded design, subjects in PSG were provided pinitol supplement, consumed orally 1.2 g/day, and participated in the resistance exercise program and cycling exercise for two weeks. Subjects in PLG underwent the same protocol as those in PSG but consumed the same amount of placebo. No supplementation and exercise program was given to CON. Before and after the intervention, all subjects were tested for their anaerobic capacities evaluated by Wingate test twice separated by 30 min. During the test, peak anaerobic power (PP), mean anaerobic power, total work, and fatigue index were evaluated During resting and recovery, blood samples were drawn and plasma pinitol, myo-inositol, chiro-inositol, insulin, free fatty acid, glucose, and lactate levels were analyzed After two weeks, PP and relative PP of the second biking were improved from the first biking in PSG only (p<0.05). No changes were found in all other variables of Wingate test in all groups. No statistical differences between groups and pre- and post-intervention were observed in concentrations of pinitol, myo-inositol, and chiro-inositol, but pinitol concentration was higher during recovery compared to the baseline in all groups and testings (p<0.05). Lactate level during recovery was higher than the resting level, but no other blood parameters were significantly changed. In conclusion, two weeks of pinitol supplementation in conjunction with short duration of anaerobic training in healthy young men did not induce any obvious benefits in terms of anaerobic capacity and energy metabolism Individual and/or population susceptibility may be one factor responsible for adopting pinitol supplementation.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.313-320
• /
• 2019

Nowadays, as the availability of tiny, low-cost microcomputer increases at a high level, mobile robots are experiencing remarkable enhancements in hardware design, software performance, and connectivity advancements. In order to control Turtlebot 2, several algorithms have been developed using the Robot Operating System(ROS). However, ROS requires to be run on a high-cost computer which increases the hardware cost and the power consumption to the robot. Therefore, design an algorithm based on low-cost hardware is the most innovative way to reduce the unnecessary costs of the hardware, to increase the performance, and to decrease the power consumed by the computer on the robot. In this paper, we present a path-finding algorithm for TurtleBot 2 based on low-cost hardware. We implemented the algorithm using Raspberry pi, Windows 10 IoT core, and RPLIDAR A2. Firstly, we used Raspberry pi as the alternative to the computer employed to handle ROS and to control the robot. Raspberry pi has the advantages of reducing the hardware cost and the energy consumed by the computer on the robot. Secondly, using RPLIDAR A2 and Windows 10 IoT core which is running on Raspberry pi, we implemented the path-finding algorithm which allows TurtleBot 2 to navigate from the starting point to the destination using the map of the area. In addition, we used C# and Universal Windows Platform to implement the proposed algorithm.