• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.549-556
• /
• 2013

This study analyzed the actual use of defect deposits for financing long-term expenses (that is, expenses incurred within 4-10 years of building completion) and for financing short-term expenses (that is, expenses incurred within 3 years of building completion). Therefore, 36 cost data on the expenses financed out of defect deposits for apartment complexes were collected from construction companies and analyzed using statistical methods. The findings revealed that 62.6 percent of defect deposits were spent to resolve actual defects, and 37.4 percent were spent resolving resident complaints. Furthermore, these results are valid regardless of the location of the complexes. As such, these results could be of significance when establishing or revising regulations regarding the repair of the long-term defects of apartment complexes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.131-132
• /
• 2011

The Basic Act on Low Carbon Green Growth is particularly important because it establishes the basis for climate change policies and replaces Sustainable Development as a directive idea for all environmental policies and regulations. But there still remain some legal and administrative task to shape the relationship with other laws and international codes. This study aims to propose the fact that the Leadership in Energy and Environmental Design should be involved at the Basic Act.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.57-64
• /
• 2015

The construction of vinyl greenhouses are increasing because of economic feasibility, construction period, and construction regulations. However, the vinyl greenhouses are apt to collapse by snow load since they have a small member as a temporary structure. The 3 types of buckling such as global, member and nodal buckling could be occurred to arched structures according to characteristics of cross section. To examine the member buckling, the precision of analysis need to be enhanced. In that case, we can examine the characteristics of the those buckling. The purposes of this study are to verify buckling characteristics of structures using the method of high precision analysis with a center node of member. The results of high precision analysis bring member buckling, and in the analysis method having the center node of member, the value of strength is getting lower than a previous study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.339-340
• /
• 2018

Contemporary concrete structures make use of underground spaces as parking lots and other comfort facilities for efficiency purposes. As underground environmental conditions are in constant exposure to degradation factors from the environment such as groundwater, hydraulic and soil pressure, structural movement and settlement, structural defects in the form of leakage occur. Current maintenance regulations and regimes are unable to respond to this field, as degradation mechanisms in underground environments are still unclear. In this regard, this study proposes the utilization of integrated information sharing system that can provide various technical information for construction designs to prevent leakages in underground concrete structures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.195-198
• /
• 2009

In this paper, regulation for form work in standard specification among Korea and foreign countries are studied and compared. Within the scope of this paper, regulation regarding fabrication of form and form removal are mainly focused on. Standard specification prescribed by construction temporary equipment association provides detailed regulations and well arranged. ACI 347-04, CEB-FIP and BS EN 13670 had different style and scope compared to domestic specification. Especially, regulation for form removal in ACI prescribed in terms of minimum period.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.9-10
• /
• 2017

For the structural analysis of reinforced concrete structures, the mechanical properties of concrete at each temperature are required and the mechanical property values according to specific temperature are presented in the design regulations and codes. In this study, the mechanical properties of concrete were experimented by using 35MPa concrete produced in Korea from 20℃ to 900℃(two kinds of test method). Compared the results with previous domestic papers, we aimed to contribute to the construction of mechanical characteristics D.B. of at the elevated temperatures of domestically produced concrete which can be used for structural analysis in fire.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.83-84
• /
• 2019

Recently, the supply and demand of aggregates has become difficult due to various practical constraints such as depletion of natural aggregate resources and tightening environmental regulations. As a result, aggregates such as selective crushed aggregates and river aggregates are now distributed to the construction market. In particular, among the aggregates distributed in the country, selective crushed aggregates that have been used recently are characterized by the fact that the quality of the raw material is not uniform and is based on geological characteristics. Such bad aggregates can affect the overall performance of the concrete and shorten the life of the structure. Therefore, in this study, in order to improve such problems, we want to analyze the effect of aggregate powder on mortar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.27-28
• /
• 2021

For Barrier-Free certification, the floor and ground surfaces must be finished with materials that are not slippery, flat, and have low-impact in fallis. However, the BF Certification Act does not provide specific methods to meet these regulations. In performance-based design, the responsibility of proving the performance rests with the building owner and architect, so quantitative evaluation indexes are needed to select suitable materials. Furthermore, changes in performance after completion should be checked periodically in 'As-Is' conditions. There are various methods for slips, trips and falls risk assessment, causing confusion for users. In this study, the results of previous studies on the evaluation methods of slips, trips and falls were considered closely, and each quantitative evaluation index that can be used in the new construction and maintenance phase was presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.93-94
• /
• 2019

When the fire door is recently installed in the field, there are frequent cases where the fire door is manufactured with fire door having low quality or different structure compared to the performance that the fire door producer has confirmed in the performance test or the construction specification. In order to improve the on-site quality management of the fire door, we comprehensively classify the quality management items of the fire door according to the management subject and the step by stage and set the field quality management procedure, the field quality management inspection item, regulations and standardized checklists were presented.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.24-25
• /
• 2015

To realize the global standard of the assembly facility, one of key point is an influence of local characteristic. The global standardized information could be a useful input, especially at the beginning stage of the project. The content should be carefully checked against local requirements, in order to develop an Assembly Facility design to meet local regulations & characteristics. The level of input information required in each step is different depend on regions & countries. At an execution stage of the project, the global standard input needs to be updated as customized final input for the construction. There will be many issues to be clarified and coordinated so that the Assembly facilities meet the final requirements for the production technology. As a result, it is important to understand the timing to use the global standard information and the contents what is needed to adapt to the local characteristics. And close collaboration between production technology team and facility team is always required.