• 제목/요약/키워드: Construction of the wall

검색결과 1,858건 처리시간 0.033초

높은 아치형 지중강판 구조물의 시공 중 거동 분석 (Behaviors of the High-profile Arch Soil-steel Structure During Construction)

  • 이종구;조성민;김경석;김명모
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.71-84
    • /
    • 2003
  • 지중강판 구조물은 강판부재 내에 발생하는 휨모멘트에는 매우 취약하기 때문에 그 주변을 양질의 흙으로 뒷채움하여 주변 흙과의 상호작용에 의하여 상부에 작용하는 하중을 지지한다. 그러나, 구조물 측면을 뒷채움할 때나 최소토피고를 확보하지 못한 상태에서 활하중이 작용할 때에는 강판부재내에 과도한 모멘트가 발생할 수 있다. 현재 설계기준에서는 허용변형량을 제시하여 시공 중에 과도한 변형이 발생하는 것을 방지하고 있으며 Duncan(1979)과 McGrath 등(2001)은 강도해석법을 제안하여 시공 중에 발생하는 모멘트를 강판의 소성강도 이내로 제한하고 있지만, 허용변형량은 경험적으로 규정한 값이고 강도해석에 의한 구조 안정성 검토는 유한요소 해석결과를 바탕으로 제안되었기 때문에 이들에 대하여 실험적 검증이 필요하다. 이 연구에서는 높은 아치형 구조물에 대한 실규모 현장시험을 실시하여 시공 중 거동과 활하중에 대한 하중지지 거동을 분석하였다. 시험결과를 바탕으로 시험시공 구조물의 허용변형량을 '높이의 1.45%' 로 추정할 수 있었는데 이는 설계기준의 허용값인 '높이의 2%' 보다 작은 값이었다. 또한, 계측결과를 Duncan과 McGrath 등이 제안한 강도해석결과와 비교하여 Duncan은 성토하중에 의한 모멘트는 과소평가하고 활하중 모멘트는 과대평가 하지만 McGrath 등은 두 값을 모두 실제와 근접하게 예측함을 알 수 있었다. 그러나, 두 방법에 의한 소성힌지에 대한 안전율은 실제 안전율과 잘 일치하여 두 방법 모두 시공 중에 작용하는 활하중에 대한 구조 안정성을 적절히 평가할 수 있음을 확인하였다.나 길항력(6.4 ㎜)은 남아있었다. 또한 분자량 10kDa 이하의 분획에서는 chitinase 활성은 없으나 길항력(5.2㎜)은 나타내었고, 80℃에서 열처리하여도 길항력(5.0mm)이 남아있어 효소 이외 다른 생리활성물질이 존재함을 확인하였다.rin, (+)-taxifolin 3-O--$\beta$-D-glucopyranoside, (+)-catechin 및 benzoic acid의 함량은 건조 및 처리 온도가 증가할 수록 감소하는 양상을 나타내었다.tier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times

익산 미륵사지 석탑 석인상의 조영시기와 훼손도 진단 및 보존관리 (The Damage Assessment, Construction Point of Time and Deterioration Diagnosis and Conservation Maintenance of Stone Statues Around the Stone Pagoda in Mireuksaji Temple in Iksan)

  • 이동식;이연경
    • 헤리티지:역사와 과학
    • /
    • 제47권4호
    • /
    • pp.74-91
    • /
    • 2014
  • 익산 미륵사지 석탑 석인상은 639년경 석탑이 조영된 이후 고려 말이나 조선 초기에 탑 주변에 조성되었다. 이 석인상은 동물에서 사람으로 변화하는 과도기적인 모습을 보이며, 탑을 수호하는 역할을 하였을 것으로 추정된다. 현재 석인상의 표면은 삭박되어 뚜렷한 도상을 알 수 없을 정도로 뭉그러져 있다. 그러나 남서 석인상은 세 방위(서북 북동 동남)에 놓인 석인상에 비해 물성은 약하지만 도상이 뚜렷하게 잘 남아 있다. 이러한 석인상의 표면 상태는 석인상이 위치한 노출환경과 직접적인 관련이 있다. 세 방위에 놓인 석인상은 그동안 외부에 노출되어 있었지만, 남서쪽에 놓인 석인상은 17세기경 석탑 주변에 석축을 축조하면서 석축 안에 들어가게 됨에 따라 외부 저해환경으로부터 차단될 수 있었기 때문이다. 이와 같이 약 400여 년간 다른 환경에 놓여 있었던 석인상은 차별적인 풍화현상을 보인다. 즉 세 방위(서북 북동 동남; $176{\cdot}109{\cdot}273kgf/cm^2$)에 놓인 석인상은 원래 물성이 좋았지만 삭박에 의해 도상이 불분명하고 생물의 침해가 심한 반면, 남서쪽에 놓인 석인상은 원래 물성($133kgf/cm^2$)은 좋지 않았지만 흑색오염물과 입상 분해 현상이 관찰될 뿐 도상형태가 잘 남아 있다. 석인상을 외부에 그대로 노출시켜 보존하는 것은 석인상의 형태적 보존을 위해서 권장할 만한 보존 관리방안이라 할 수 없다. 미륵사지 주변에 대한 미기후 환경 데이터를 적용해볼 때 미륵사지는 해를 거듭할수록 강산성비가 내리는 강한 풍화영역에 속하기 때문이다. 따라서 석인상의 형태적 보존을 위해서는 석인상이 있었던 원래의 위치를 고려한 보존 관리방안보다는 현재의 도상을 유지하고 보존할 수 있는 보존 관리방안을 생각해 볼 필요가 있다.

전통조경 시설물의 역사적 수리기법에 관한 기초연구 - 조선시대 관영공간을 중심으로 - (Basic Study on Historical Repair Techniques for Landscape Architectural Facilities - Focusing on Government-managed Spaces in Joseon Dynasty -)

  • 김민선;오준영
    • 한국전통조경학회지
    • /
    • 제41권4호
    • /
    • pp.8-20
    • /
    • 2023
  • 전통조경 시설물은 역사성과 진정성을 가진 기법에 따라 수리되어야 하지만 현행 문화재수리 표준시방서의 수리기준은 실무적 차원의 기본지침에 해당하며, 구체적인 사례를 통해 세부기법을 분석한 연구도 많지 않다. 본 연구는 조선시대 관영공간의 화계, 연못, 수로, 포장을 중심으로 역사적 사실에 근거한 수리기법을 시론하였다. 첫째, 화계는 석축 부재의 재료와 마감, 구조 강화와 뒤채움 재료, 상부 표토면 보호 조치를 분석하고, 기초보강용 석재와 교착용 미장재, 석재의 가공기법 등을 도출하였다. 특히 쇠시리와 모접기를 통한 세밀한 장대석 가공법, 기초보강용 엄석과 유회의 사용은 화계의 독특한 수리기법 중 하나로 확인되었다. 둘째, 연못의 경우 호안 석축의 재료와 구조, 기초부 보강과 누수 방지 기법을 살펴보면서 지정공사, 구부재 활용, 수질 관리 등에 관한 특징을 도출하였다. 고임쇠와 심석을 통한 내구성 강화, 기초부 강화를 위한 말뚝지정, 오물 유입 방지를 위한 사초 피복 등이 주목할 만한 수리기법으로 확인되었다. 셋째, 수로는 축조 재료, 기초부 강화와 누수 방지 조치, 수해 예방 조치를 중점적으로 파악하면서 덮개돌 마감 방식, 지정과 뒤채움 재료, 유속 저감 방법 등의 수리기법을 파악하였다. 수량에 따른 다양한 바닥 재료, 누수 방지를 위한 강회 마감 등이 주요 수리기법으로 주목되며, 날개벽과 낙차공 등은 수로 내부의 충파와 유속 관리를 위한 조치로 확인되었다. 넷째, 포장은 기초부 구성, 부속 재료와 도구, 사초 활용 등에 관한 실제 사례를 제시하였다. 사초 피복을 통한 박석 고정, 세승으로 불린 기준실 사용 등이 주요 수리기법 중 하나였으며, 특히 방전장으로 불린 방전 포설 전문장인의 존재가 새롭게 확인되었다. 본 연구가 전통조경 시설물의 수리기법 발굴을 위한 출발점이 되고, 향후 시방서 개정을 위한 기초자료로 활용되길 기대한다.

초고해상도 무인항공기 영상을 이용한 한국 황도 갯벌의 미세 퇴적 구조 특성 분석 (Analysis of Micro-Sedimentary Structure Characteristics Using Ultra-High Resolution UAV Imagery: Hwangdo Tidal Flat, South Korea)

  • 김민주;백원경;정회수;유주형
    • 대한원격탐사학회지
    • /
    • 제40권3호
    • /
    • pp.295-305
    • /
    • 2024
  • 본 연구는 초고해상도 무인항공기 자료를 활용하여 황도 갯벌의 미세 퇴적 구조를 분석하는 것을 목적으로 하였다. 갯벌은 육지와 바다 사이의 전이 지역으로서 조석 활동에 의해 끊임없이 변화하며, 퇴적 과정과 환경 조건을 이해하는 데 중요한 독특한 환경을 제공한다. 기존의 현장 관측 방법은 공간적 및 시간적 범위에 한계가 있고, 기존 위성 영상은 미세한 퇴적 구조를 연구하기에 충분한 해상도를 제공하지 못한다. 이러한 한계를 극복하기 위해, 본 연구에서는 충청남도 황도 갯벌의 고해상도 이미지를 무인항공기를 이용해 촬영하였다. 황도 갯벌은 방조제 건설과 같은 해안 개발 프로젝트로 인해 퇴적 환경이 크게 변화한 지역이다. 2022년 5월 17일부터 18일까지 현장 관측을 통해 91개의 지점에서 퇴적물 샘플을 수집하였으며, 그중 25개의 주요 지점을 집중적으로 분석하였다. 약 0.9 mm의 공간 해상도를 가진 무인항공기 자료를 이용하여 미세 퇴적 구조의 파라미터(Parameter)를 식별하고 추출하였다. 건열에서는 다각형 장축의 길이를 추출하였고, 연흔에서는 파장과 연흔을 정량적으로 표현하는 대표적인 지표인 연흔 대칭 지수(Ripple Symmetry Index)를 추출하였다. 연구 결과, 니질 함량이 80% 이상인 지역에서는 평균 37.3 cm 간격의 건열이 형성되었으며, 사질 함량이 60% 이상인 지역에서는 평균 파장이 8 cm, 연흔 대칭 지수가 2.0인 연흔이 형성되었다. 본 연구는 초고해상도 무인항공기 자료를 활용하여 인간의 도보에 의한 현장 관측 없이도 갯벌의 미세 퇴적 구조를 효과적으로 분석할 수 있음을 입증하였다. 이는 환경 모니터링 및 해안 관리에서 중요한 도구로써 무인항공기 기술의 가능성을 강조하며, 무인항공기 자료가 퇴적 구조 연구에 유용하다는 것을 보여준다. 또한, 본 연구의 결과는 보다 정밀한 퇴적상 분류를 위한 기반 자료로 활용될 수 있을 것으로 기대된다.

영한 기계 번역에서 미가공 텍스트 데이터를 이용한 대역어 선택 중의성 해소 (Target Word Selection Disambiguation using Untagged Text Data in English-Korean Machine Translation)

  • 김유섭;장정호
    • 정보처리학회논문지B
    • /
    • 제11B권6호
    • /
    • pp.749-758
    • /
    • 2004
  • 본 논문에서는 미가공 말뭉치 데이터를 활용하여 영한 기계번역 시스템의 대역어 선택 시 발생하는 중의성을 해소하는 방법을 제안한다. 이를 위하여 은닉 의미 분석(Latent Semantic Analysis : LSA)과 확률적 은닉 의미 분석(Probabilistic LSA : PLSA)을 적용한다. 이 두 기법은 텍스트 문단과 같은 문맥 정보가 주어졌을 때, 이 문맥이 내포하고 있는 복잡한 의미 구조를 표현할 수 있다 본 논문에서는 이들을 사용하여 언어적인 의미 지식(Semantic Knowledge)을 구축하였으며 이 지식은 결국 영한 기계번역에서의 대역어 선택 시 발생하는 중의성을 해소하기 위하여 단어간 의미 유사도를 추정하는데 사용된다. 또한 대역어 선택을 위해서는 미리 사전에 저장된 문법 관계를 활용하여야 한다. 본 논문에서는 이러한 대역어 선택 시 발생하는 데이터 희소성 문제를 해소하기 위하여 k-최근점 학습 알고리즘을 사용한다. 그리고 위의 두 모델을 활용하여 k-최근점 학습에서 필요한 예제 간 거리를 추정하였다. 실험에서는, 두 기법에서의 은닉 의미 공간을 구성하기 위하여 TREC 데이터(AP news)론 활용하였고, 대역어 선택의 정확도를 평가하기 위하여 Wall Street Journal 말뭉치를 사용하였다. 그리고 은닉 의미 분석을 통하여 대역어 선택의 정확성이 디폴트 의미 선택과 비교하여 약 10% 향상되었으며 PLSA가 LSA보다 근소하게 더 좋은 성능을 보였다. 또한 은닉 공간에서의 축소된 벡터의 차원수와 k-최근점 학습에서의 k값이 대역어 선택의 정확도에 미치는 영향을 대역어 선택 정확도와의 상관관계를 계산함으로써 검증하였다.젝트의 성격에 맞도록 필요한 조정만을 통하여 품질보증 프로세스를 확립할 수 있다. 개발 된 패키지의 효율적인 활용이 내조직의 소프트웨어 품질보증 구축에 투입되는 공수 및 어려움을 줄일 것으로 기대된다.도가 증가할 때 구기자 열수 추출 농축액은 $1.6182{\sim}2.0543$, 혼합구기자 열수 추출 농축액은 $1.7057{\sim}2.1462{\times}10^7\;J/kg{\cdot}mol$로 증가하였다. 이와 같이 구기자 열수 추출 농축액과 혼합구기자 열수 추출 농축액의 리올리지적 특성에 큰 차이를 나타내지는 않았다. security simultaneously.% 첨가시 pH 5.0, 7.0 및 8.0에서 각각 대조구의 57, 413 및 315% 증진되었다. 거품의 열안정성은 15분 whipping시, pH 4.0(대조구, 30.2%) 및 5.0(대조구, 23.7%)에서 각각 $0{\sim}38.0$$0{\sim}57.0%$이었고 pH 7.0(대조구, 39.6%) 및 8.0(대조구, 43.6%)에서 각각 $0{\sim}59.4$$36.6{\sim}58.4%$이었으며 sodium alginate 첨가시가 가장 양호하였다. 전체적으로 보아 거품안정성이 높은 것은 열안정성도 높은 경향이며, 표면장력이 낮으면 거품형성능이 높아지고, 비점도가 높으면 거품안정성 및 열안정성이 높아지는 경향이 있었다.protocol.eractions between application agents that are developed using different

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

고 에너지 방사선치료에서 환자의 피폭선량 분포와 생식선의 차폐 (Shielding for Critical Organs and Radiation Exposure Dose Distribution in Patients with High Energy Radiotherapy)

  • 추성실;서창옥;김귀언
    • Journal of Radiation Protection and Research
    • /
    • 제27권1호
    • /
    • pp.1-10
    • /
    • 2002
  • 의료용 선형가속기에서 발생되는 고 에너지 광자선은 콜리메이터에 의하여 누출되며 치료두부(head), 콜리메이터, 환자를 포함한 치료실내의 모든 벽과 구성 물질들에 의하여 많은 산란선이 발생된다. 방사선치료는 종양에 따라서 최소한 40 Gy에서 80 Gy까지 조사되기 때문에 주위건강조직 특히 생식가능한 사람에 대한 생식선의 피폭선량을 평가하여야하며 종양치료에 영향을 주지 않은 범위에서 가능한 방법을 동원하여 피폭선량을 줄여야한다. 방사선 안전관리등의 기술기준에 관한 규칙(과학기술부령 제17호) 제3절 의료분야의 특별기준, 제44조(진료환자의 방사선 피폭)에 의하면 진료를 위한 환자 피폭선량을 합리적으로 달성 가능한 최소의 수준으로 유지하기 위한 절차를 구비하여야 하며 과학기술부 장관은 이에 준하는 의료시설 및 장비취급의 기술기준을 정하고 고시하여야한다고 명시 되어있다. 고 에너지방사선은 악성종양환자들의 치료성과를 향상시키는 동시에 치료후 방사선에 의한 만성효과가 발생 될 수 있기 때문에 주선속의 다양한 산란선과 누출선의 선질변화와 선량을 측정하고 생식선과 같은 주요장기를 산란선으로부터 차폐할 수 있는 기구를 제작 사용함으로서 방사선 피폭선량을 최대한으로 감소시킬 수 있었다. 고 에너지 방사선은 의료용 선형가속기(CLINAC 2100C/D. 2100C. 600C)에서 발생시킨 4, 6, 10 MV x-ray와 코발트원격치료장치(ALCYON II)의 코발트선원에서 방출되는 1.25 MV의 감마선을 이용하였다. 선량측정은 폴리스틸렌과 인체팬텀(Rando)사용하였으며 측정기는 이온함, TLD 및 필름을 사용하였다. 고 에너지 방사선에 의한 산란선은 장치의 콜리메이터 뿐만 아니라 치료실 벽 인체내부등 모든 방향에서 방사됨으로 납 벽돌에 의한 차폐율측정은 많은 변수를 가졌으며 고환인 경우에는 3면이 모두 차폐되도록 항아리모양으로 제작하였다. 태아인 경우 태아가 위치하고 있는 골반위에 육교모양의 선반을 만들고 그 위에 납 벽돌을 장치하도록 고안하였다. Co-60 감마선, 4 MV x-선, 10 MV x-선에서 발생되는 누출선량과 산란선량에 의한 평균 피폭선량은 조사면 중심으로부터 10, 30, 60cm 거리에서 조사면내 최대선량에 대하여 각각 $10^{-2},\;10^{-3},\;10^{-4}$의 비율로 측정되었으며 거리에 따라 지수함수로 줄어들었다. 흉부에 국한된 종양을 10 MV x-ray, $12{\times}12 cm^2$ 조사면으로 치료하였을 때 자궁에 받는 피폭선량은 0.9 mGy/Gy이며 고환이 받는 피폭선량은 0.6 mGy/Gy 이었으며 체장과 신장은 각각 4.8 mGy/Gy 와 2.5 mGy/Gy이다 10 MV x-선, $14{\times}14cm^2$ 조사면 경계로부터 10 cm 밖에서 납벽돌의 반가층 두께는 약 9.0 mm 이였고 20cm 밖에서는 반가층 두께가 약 6.5 mm로 측정되었다. 복부에 위치한 악성종양을 60 Gy 조사하였을 경우 태아가 위치하고 있는 자궁의 피폭선량은 약 370 mGy이고 이곳을 10 mGy이하가 되도록 차폐하려면 약 6.2 cm두께의 납 벽돌을 자궁위에 장착하여야 하며 골반치료시 고환에 10 mGy이하가 되도록 차폐하려면 약 5 cm 두께의 납 항아리가 요구된다. 고 에너지 고 준위 방사선치료시 고환은 3면을 항아리모양으로 차폐할 수 있어 피폭선량을 상당히 줄일 수 있으며 자궁인 경우 체내에서 산란된 선량의 차폐는 불가능하였다.

서울시 아파트단지의 녹지배치 및 식재구조 변화 연구 (Change of Green Space Arrangement and Planting Structure of Apartment Complexes in Seoul)

  • 이동욱;이경재;한봉호;장재훈;김종엽
    • 한국조경학회지
    • /
    • 제40권4호
    • /
    • pp.1-17
    • /
    • 2012
  • 본 연구는 서울시 아파트단지의 시기별 녹지배치구조와 식재구조의 변화과정을 분석하여 보다 친환경적인 아파트단지 내 녹지조성 개선방안을 제시하고자 하였다. 연구대상지는 서울시에 조성된 아파트단지 중 조성시기, 용적률, 지하주차장에 의한 지반현황, 녹지율의 차이가 뚜렷한 아파트단지 12개소를 선정하였다. 연구대상지 유형화는 시기별로 녹지율과 지반현황을 기준으로 녹지율이 높은(40% 이상) 자연지반 아파트, 녹지율이 낮은(40% 미만) 자연지반 아파트, 녹지율이 낮은(40% 미만) 인공지반 아파트, 녹지율이 높은(40% 이상) 인공지반 아파트 네 가지로 구분하였다. 아파트단지 녹지배치 구조의 가장 근원적 변화요인은 녹지율과 인공지반 여부로 용적률이 상승하면서 주차장 면적비율도 높아져 상대적으로 녹지율은 낮아졌다. 녹지배치구조가 가장 많이 변한 녹지유형은 전면녹지와 완충녹지로 전면녹지는 녹지율이 높은 자연지반 아파트의 평균 녹지 폭 10.0m에서 3.5m, 2.7m, 4.5m로 시기별로 축소 변화하였다. 완충녹지는 녹지율이 높은 자연지반 아파트에서 평균 녹지 폭 15.0m로 단지외곽 경계부를 연결하였으나, 녹지율이 낮은 인공지반 아파트에서 주차장 확대로 평균 녹지 폭이 7.7m, 2.7m로 점차 축소되고 일부 구간은 단절되었으나, 2001년 이후 녹지에 대한 인식변화로 다시 평균 녹지 폭이 3.8m로 넓어지면서 연결되었다. 녹량 변화를 살펴보면, 녹지율이 높은 자연지반 아파트 녹지용적계수가 $1.27m^3/m^2$이었고, 식재밀도가 높아지면서 녹지율이 낮은 자연지반 아파트의 녹지용적계수가 $3.47m^3/m^2$로 가장 높았다. 반면에 녹지율이 높은 인공지반 아파트의 녹지용적계수는 $0.72m^3/m^2$로 매우 낮은 상태이었다. 식재밀도는 교목 아교목층의 경우 5.0주/$100m^2$에서 14.5주/$100m^2$로 증가하였다. 아파트단지 녹지를 보다 친환경적이고 기능적으로 조성하기 위한 방안으로 녹지율 40% 이상의 아파트단지 내 전면녹지는 녹지 폭 4.5m 이상으로 확대하여 정원개념의 경관 식재지로 조성하고, 후면녹지는 녹지 폭 5.0m이상으로 확대하고 복층구조로 식재하여 녹지량을 증진하는 것을 제시하였다. 측면녹지는 수고가 높은 수종을 식재하여 벽면 차폐와 녹음기능을 증진하고, 완충녹지는 자생수종을 자연림에 가까운 다층구조로 조성하는 생태적 배식기법을 적용하면서 단지내부녹지와 연결해야 할 것으로 판단되었다.