• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2000.11a
• /
• pp.575-585
• /
• 2000

본 사업은 1994년부터 1996년까지 3년 간 시범사업으로 추진된 지역정보화 사업의 과제인 창원/마산 지역정보 유통망 구축사업을 확대 발전시키고 시스템 운영의 효율화를 도모하고자 DB를 통합하여 확대 재 구축함으로써 전자상거래 기반의 인터넷을 통한 웹 정보 이용 활성화 차원에서 추진되었다. 기 구축되었던 $\ulcorner$창원/마산 지역정보유통망 구축사업$\lrcorner$은 정보화를 통한 지역경제 발전에 일익을 담당하고자 관. 산. 연이 참여한 지역정보화 사업이다. 이러한 창원/마산지역 산업체에 대한 지원효과를 이번에 확대하여 그 동안 Multimedia, Graphics, Web 등 정보화 환경이 크게 변화, 발전됨에 따라 현실적이며 현장적용형 패키지의 개발 지원이 대두된 $\ulcorner$경남지역 정보화확산사업$\lrcorner$은 연구개발정보센터와 창원시, 진해시, 한국기계연구원이 매칭 펀드에 의한 대응자금으로 구축한 시스템이다. 정보수집대상은 경남지역에 소재하고 있는 20개 산업단지 3,700여 입주기업을 정보수집요원이 직접 방문하여 현장에서 필요로 하는 요구정보를 반영하였다. 신규로 구축한 정보는 산업기반 기업체기본정보 DB 및 기업 기술개발 현장적용형 기술정보 패키지정보를 중심으로 구축하였으며, 인터넷 활용교육을 통한 동종 업종간 정보교류체제 구축하였다. 특히 Cyber Market을 구현하기 위해 1,200여건의 기업체정보 및 제조상품 DB를 응용한 제품 Mall 데이터베이스를 구축하였다. 본 사업을 통하여 경남지역 산업단지에 입주한 기업체의 정보 활용을 극대화하여 지역경제 발전에 기여함과 동시에 국내 지역정보화 시범모델로서 위상을 확립하고자 한다.을 기업의 타인자본비용과 자기자본비용의 조합인 기회자본비용으로 할인함으로써 현재의 기업가치를 구할 수 있기 때문이다. 이처럼 기업이 영업활동이나 투자활동을 통해 현금을 창출하고 소비하는 경향은 해당 비즈니스 모델의 성격을 규정하는 자료도로 이용될 수 있다. 또한 최근 인터넷기업들의 부도가 발생하고 있는데, 기업의 부실원인이 어떤 것이든 사회전체의 생산력의 감소, 실업의 증가, 채권자 및 주주의 부의 감소, 심리적 불안으로 인한 경제활동의 위축, 기업 노하우의 소멸, 대외적 신용도의 하락 등과 같은 사회적·경제적 파급효과는 대단히 크다. 이상과 같은 기업부실의 효과를 고려할 때 부실기업을 미리 예측하는 일종의 조기경보장치를 갖는다는 것은 중요한 일이다. 현금흐름정보를 이용하여 기업의 부실을 예측하면 기업의 부실징후를 파악하는데 그치지 않고 부실의 원인을 파악하고 이에 대한 대응 전략을 수립하며 그 결과를 측정하는데 활용될 수도 있다. 따라서 본 연구에서는 기업의 부도예측 정보 중 현금흐름정보를 통하여 '인터넷기업의 미래 현금흐름측정, 부도예측신호효과, 부실원인파악, 비즈니스 모델의 성격규정 등을 할 수 있는가'를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.322-331
• /
• 2017

District heating was first introduced in Korea in 1985. As the service life of the underground thermal piping network has increased for more than 30 years, the maintenance of the underground thermal pipe has become an important issue. A variety of complex technologies are required for periodic inspection and operation management for the maintenance of the aged thermal piping network. Especially, it is required to develop a model that can be used for decision making in order to derive optimal maintenance and replacement point from the economic viewpoint in the field. In this study, the analysis was carried out based on the repair history and accident data at the operation of the thermal pipe network of five districts in the Korea District Heating Corporation. A failure probability model was developed by introducing statistical techniques of qualitative analysis and binomial logistic regression analysis. As a result of qualitative analysis of maintenance history and accident data, the most important cause of pipeline damage was construction erosion, corrosion of pipe and bad material accounted for about 82%. In the statistical model analysis, by setting the separation point of the classification to 0.25, the accuracy of the thermal pipe breakage and non-breakage classification improved to 73.5%. In order to establish the failure probability model, the fitness of the model was verified through the Hosmer and Lemeshow test, the independent test of the independent variables, and the Chi-Square test of the model. According to the results of analysis of the risk of thermal pipe network damage, the highest probability of failure was analyzed as the thermal pipeline constructed by the F construction company in the reducer pipe of less than 250mm, which is more than 10 years on the Seoul area motorway in winter. The results of this study can be used to prioritize maintenance, preventive inspection, and replacement of thermal piping systems. In addition, it will be possible to reduce the frequency of thermal pipeline damage and to use it more aggressively to manage thermal piping network by establishing and coping with accident prevention plan in advance such as inspection and maintenance.

• The Critical Review of Religion and Culture
• /
• no.31
• /
• pp.255-287
• /
• 2017

This paper analyzes the religious circuit of suicidal concept based on verbal expression and ritual acts, which are found in the suicide discourse of Korean Catholic Church and Protestant Church. In the relationship of suicide and religion, it is easily overlooked the religious circuit and its construction that forms the concept of suicide among the religious laymen. It is assumed that the belief system of traditional religions prohibits suicide and the laymen accordingly construct a perception or concept of suicide along with this belief system. Various studies on this subject have proved it. However, in order to understand the religious way of constructing the concept of suicide on a personal level, it is necessary to pay attention to the religious environment in which the concepts and emotions of suicide circulate. The laymen do not passively and perfectly accept the finely established suicide concept provided by the doctrine or the theology. Rather, the laymen tend to collect the pieces of concept over the suicide that are drifting in the religious environment of his/her daily routine life and to make an concept of suicide in an incomplete form. We can find the unstable and imperfect traits of such a suicide concept through the experience of suicide survivors who have a religious background. For the suicide survivors with religious beliefs, they resist the formal doctrinal and theological provisions to suicide, or try to understand the notion of suicide in their own contexts. In terms of linguistic expressions and ritual acts relating to suicide, the attentions are differently directed in the public and the private domain among the religious groups. Considering on the high rates of suicide in Korean society, the Korean Catholic Churches are increasingly tolerant over the suicide and accept it in the public sphere. It is unlikely when comparing to the negative attitudes of the suicide in the past. However, such tolerance does not go beyond the doctrinal and ethical judgment that defines suicide as a serious sin. The once-committed lay believer's speech and gestures usually contain the various emotions, such as sadness, grief, anxiety, regretfulness, eagerness, and pain in the private spheres. The language and gestures with these emotions have been activated in the religious circuits of suicide, being extended to the religious apparatus for the person who died of suicide. In case of Protestantism, the institutional organizations, such as the particular denominations and the individual-churchism of the Korean Protestant Churches, and their own interpretations of the Bible have in the private sphere strongly effected on the linguistic expressions and the rituals related to the suicide. The religious-ethical judgment of the suicide is varied how the suicide is interpreted by the theologians and the pastors. And the ritual acts for healing the complex feelings and the psychological wounds of the suicide survivors are not actively explored and adopted yet. It makes harder to approach and heal the protestant followers since they emphasize the innermost belief and the salvation assurance faith.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.174-191
• /
• 2021

Gangdo (江都), a reproduction of Gaegyeong, was the capital of Goryeo for 39 years. However, due to the urgent wartime situation of the Mongol invasion and the geographical features of Ganghwa Island, the castle system and palace layout were somewhat different from those of Gaegyeong. Gangdo's castle can be understood as a triple castle system consisting of outer castle, middle castle, and inner castle. First, the outer castle was the first to be completed, and it was built at the forefront to prevent the Mongol army from invading in the first place. It is presumed that the section was between Huamdon and Hwadodon in the outer castle during the Joseon Dynasty. The middle castle can be seen as the present 'Middle Castle', a castle built of earth on the outskirts of the Ganghwa-mountain Castle. Considering the sophistication and robustness of the construction method confirmed in the archaeological research, this castle is thought to have been built under a meticulous plan. In other words, as the capital city, it was completed 'at last' as recorded in the Koryo History, after a long 18-year construction process to protect palaces, government offices, and private houses. The inner castle was a castle with the character of a palace. This corresponds to the Old Castle of Ganghwabu (江華府) during the Joseon Dynasty, and it almost coincided with the scale of the composition of Gaegyeong's palace castle. It was a complex functional space, featuring the integration of the palace and the imperial castle, where the main government offices and ancillary facilities, including the palace, were located. Based on the documentary record that these palaces were similar to Gaegyeong's palace, the palace map was overlapped with that of Gaegyeong. The central axis of the building from Seungpyeongmun (昇平門) to Seongyeongjeon (宣慶殿) coincided with Kim Sangyongsunjeol Monument in Ganghwa- Goryeo Palace. Therefore, it seems that the palace of Gangdo had the same basic structure as that of Gaegyeong. However, the inner palace and annexed buildings must have been arranged in consideration of the topographical conditions of Ganghwa, and this is estimated to be the Gunggol area in Gwancheong-ri.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.24-37
• /
• 2012

In this study, Community Garden of various national and international practices trends to an advanced research, the concept of community garden participated with a group operation out of initiative to produce safety food while securing space for the community, ensuring the area that has gone through a new form of active secure urban green space plan, urban renewal movement was defined as the mean. Furthermore, for the purpose of improving the poor welfare environment by attempting to experimentally make a community garden of a disabled welfare house rooftop and how to target its planning and construction process, partnership involvement, business processes have been investigated, such as cost sharing. The whole process including a budget for development of this case was conducted by the Busan Green Trust. Standard Chartered (SC) First Bank's 50% fund share by community chest, participation of volunteers, support of Busan City and Saba-gu, outside of that, sharing parts or trial to participate by diverse partnership of enterprise, public corporation and laboratory, these are the key in developing community garden's model. Established community garden places resulted food production to users of welfare center for the disabled, participating urban agricultural experience program, horticultural therapy, complex community chapter and cultural center. Furthermore, we could find the meaning of rooftop community garden in the point that it is a low cost garden by applying movable and unmovable planters. This study is profitable for improving urban environment, ensuring community chapter and urban green areas, regenerating a city to develop experimental community garden model by using a welfare house rooftop.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.

• Journal of Environmental Policy
• /
• v.6 no.2
• /
• pp.97-122
• /
• 2007

In 2006, the Ministry of Environment of the Republic of Korea, completed the construction on national environmental geographic informations including National Environmental Assessment Map, Ecological Map, Land Cover Map and so on. At this point of time, it is necessary to establish the advance strategy on national environmental geographic information, considering the complicated characteristics. Therefore, this study suggests the advance strategy on national environmental geographic information, reflecting results of analyzing the given condition and the trend of informatization. National environmental geographic information has spacial quality to be managed dispersedly in a department unit or an operations unit. According to this quality, requirements for users who need the policy based on national environmental geographic information and complex information are not satisfactory. And, the information system centering the process of administrative affairs should be converted to one putting decision supporting first in importance. Therefore, this study sets up "the realization of the sustainable land management system by advancing national environmental geographic information" as the vision of the advancing strategy. In order to accomplish the vision, this study established the purpose as follow; constructing strategic and geographic information based on knowledge, arranging the foundation to open information to the public transparently, building expanded and integrated national environmental geographic information, embodying the environmental administration based on national environmental geographic information, enhancing the efficiency of national environmental geographic information, and supporting efficiently the process of administrative affairs. And this study suggests executive plans to achieve the vision and the purpose as next; developing the quality control program to verify the information confidence, building the system to integrate and to provide environmental information, collecting information, readjusting laws and regimes in parts of the construction, the application and the management of the system, and operating the task process, human power, organization and information technology. This study puts the emphasis on providing the turning opportunity politically which is possible to make sure of the information confidence in quality, advancing from the expansion of one in quantity. However, this improvement strategy doesn't reflect all national environmental geographic information and current status of environmental administrations. Therefore, for applying the result of this study to the actual environmental administration, it is necessary to discuss regularly the systematic categorization of national environmental geographic information, to interview with the contracting parties and so on hereafter.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.614-629
• /
• 2001

As the information-intensive society in 21c based on the environment of global internet is promoted, the software is getting more large and complex, and the demand for the software is increasing briskly. So, it becomes an important issue in academic and industrial field to activate reuse by developing and exchanging the standardized component. Currently, the information services as a product type of each company are provided in foreign market place for reusing a commercial component, but the components which are serviced in each market place are different, insufficient and unstandardized. That is, construction for Component Data Registry based on ISO 11179, is not accomplished. Hence, the national government has stepped up the plan for sending out public component at 2001. Therefore, the systems as a tool for sharing and exchange of data, have to support the meta-information of standardized component. In this paper, we will propose the C_MDR system: a tool to register and manage the standardized meta-information, based upon ISO 11179, for the commercialized common component. The purpose of this system is to systemically share and exchange the data in chain of acceleration of reusing the component. So, we will show the platform of specification for the component meta-information, then define the meta-information according to this platform, also represent the meta-information using XML for enhancing the interoperability of information with other system. Moreover, we will show that three-layered expression make modeling to be simple and understandable. The implementation of this system is to construct a prototype system of the component meta-information through the internet on www, this system uses ASP as a development language and RDBMS Oracle for PC. Thus, we may expect the standardization of the exchanged component metadata, and be able to apply to the exchanged reuse tool.