• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.4
• /
• pp.52-63
• /
• 2009

WTO/TBT aims to reduce impediments to trade resulting from differences between national regulations and standards. Where international standards exist or their completion is imminent, the Code of Good Practice says that standardizing bodies should use them, or the relevant parts of them, as a basis for any standards they develop. Drawing is a formal and precise way of communicating information about the shape, size and, features. In addition, drawing is a part of the universal language of engineering. However there are many differences between international landscape drawing standard ISO 11091 and Korean landscape drawing practice(KLDP). The result of a comparison of ISO 11091 with KLDP and suggestions for international standardization of KLDP are summarized as follows. First, Among the 33 kinds of conventions from ISO 11091, 2 similar kinds and 15 different kinds from KLDP and 16 kinds of conventions which exist only in ISO 11091 appeared-for the international standardization of KLDP, it is necessary to make an extensive alteration of KLDP. Second, Europe Unity countries accepted ISO 11091 and are using it as their national standard for landscape drawing. Even Japan has accepted ISO 11091 on their civil engineering drawings and is using it as their national standard. Therefore, we need to hasten KS standard enactment based on ISO 1091. Third, For the KS standard of construction drawings, the degree of international standardization is rising even though there are still differences from the ISO standard. Therefore, since the burden on the international standardization of KLDP is expected to be weighed, preparations should be quickly brought about in the practice fields. Fourth, Since in the landscape planting ordinances of local independent governments is the standard presented by categorizing trees into evergreen and deciduous, such parts should be modified and introduced when enacting the KS standard based on ISO 11091. Fifth, For the enactment of the KS standard for landscape drawings, a wide range of opinions should be collected by the relevant landscape organization by installing a committee, and based on its recommendation, an application for the KS standard enactment of landscape drawing should be made to the chief of Ministry of Knowledge Economy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.510-518
• /
• 2020

With the promotion of digitalization in the construction industry, BIM has become an indispensable technology. On the other hand, it has not been actively utilized in practice because of the difficulty of BIM modeling. The reason is that 3D modeling is less productive not only because of the difficulty of learning BIM software but also the modeling work is done manually. Therefore, this study proposes a method and system that can improve the productivity of BIM-based modeling. For this reason, in the study, a slit caisson, which is a typical structure of a port, was selected as a development target, and various parameters were derived through interviews with experts so that it could be used in practice. This study presents a UI construction plan that considers user convenience for efficient management and operation of diverse and complex parameters. Based on this, this study used visual programming and Excel VBA to develop a BIM-based design automation system for slit caissons. The developed system can use many parameters to quickly develop slit caisson models suitable for various design conditions that can contribute to BIM-based modeling and productivity improvement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.273-283
• /
• 2014

With the introduction of COBie (Construction Operation Building Exchange) in BIM technology enabling an automatic transfer of design and construction information to operation and management (O&M) phase, the BIM centric O&M management system development process has been tested on the subject of architectural types of building. However, for now, there is a need to investigate the technical feasibility of COBie application to civil structures including industrial facilities. This study takes both "O&M Guideline for Public Wastewater Treatment Plant" and a real wastewater treatment plant into account for the purpose, in which the latter is intended to supplement the result of the first. The findings are three-folds: (1) COBie, as an asset modeling, is not sufficient enough to encompass commissioning data, (2) more relevant IFC development and family library build-up useful to modeling wastewater treatment plant is imperative, and (3) well-planned coordination and organization of COBie data-set in line with O&M practice will enhance the feasibility of the COBie in industrial facilities. The result could be used for a basis study for COBie application, particularly in industrial facilities.

• Quality Improvement in Health Care
• /
• v.10 no.2
• /
• pp.204-215
• /
• 2003

Background : ICD-10 Classification, which is used domestically as well as internationally, has limited use in the clinical practice since it is developed for at disease statistics and epidemiology. Therefore, the purposes of this study were to improve the quality of diagnosis by constructing a new disease classification based on the diagnoses doctors currently make in the clinical setting and connecting this classification with OCS and EMR, and to meet the demands of doctors for high quality medical study data in medical research. Methods : The specialists in each ophthalmic subfield collected clinical diagnoses and abbreviations based on the ophthalmology textbooks and confirmed the classifications. Total number of clinical diagnoses collected was totaled 672, for which ideal diagnoses had been selected and a new model of disease classification model in connection with ICD-10 was constructed. The constructed classification of clinical diagnoses consisted of six steps: the first step was the classification by ophthalmic subspecialty field; the second to fifth steps were the detailed classification by each specialty field; the sixth step was the classification by site. Results : After introducing the new disease classification, research on the use and a pre-post comparison was conducted. The result from the research on the use of the clinical diagnoses in inpatient and outpatient care has shown a gradually increasing tendency. From the pre-post comparison of EMR discharge summary diagnoses, the result demonstrated that the diagnosis was stated correctly and in detail. Since the diagnosis was stated correctly, code classification became correct as well, which makes it possible to construct high quality medical DB. Conclusion : This construction of clinical diagnoses provides the medical team with high quality medical information. It is also expected to increase the accuracy and efficiency of service in the department of medical record and department of insurance investigation. In the future, if hospitals wish to construct a classification of clinical diagnosis and a standard proposal of clinical diagnosis is presented by a medical society, the standardization of diagnosis seems to be possible.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.243-243
• /
• 2015

Low-flow simulation and forecasting is one of the emerging issues in hydrology due to the increasing demand of water in dry periods. Even though low-flow simulation and forecasting remains a difficult issue for hydrologists better simulation and earlier prediction of low flows are crucial for efficient water management. The UN has never stated that South Korea is in a water shortage. However, a recent study by MOLIT indicates that Korea will probably lack water by 4.3 billion m3 in 2020 due to several factors, including land cover and climate change impacts. The two main situations that generate low-flow events are an extended dry period (summer low-flow) and an extended period of low temperature (winter low-flow). This situation demands the hydrologists to concentrate more on low-flow hydrology. Korea's annual average precipitation is about 127.6 billion m3 where runoff into rivers and losses accounts 57% and 43% respectively and from 57% runoff discharge to the ocean is accounts 31% and total water use is about 26%. So, saving 6% of the runoff will solve the water shortage problem mentioned above. The main objective of this study is to present the hydrological modelling approach for low-flow simulation and forecasting using a model that have a capacity to represent the real hydrological behavior of the catchment and to address the water management of summer as well as winter low-flow. Two lumped hydrological models (GR4J and CAT) will be applied to calibrate and simulate the streamflow. The models will be applied to Seolmacheon catchment using daily streamflow data at Jeonjeokbigyo station, and the Nash-Sutcliffe efficiencies will be calculated to check the model performance. The expected result will be summarized in a different ways so as to provide decision makers with the probabilistic forecasts and the associated risks of low flows. Finally, the results will be presented and the capacity of the models to provide useful information for efficient water management practice will be discussed.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.179-190
• /
• 2016

Awareness about health is still in short supply, sufficient research and investment is falling mothayeo made, the development of image and health technology for health compared to productivity enhancement technology behind the relative reality. Through the analysis and study of special measures and health education in the country catering to propose measures and methods for this. Current analyzed and summarized to find a special health and safety training relevant provisions appear in the national legislation. By analyzing the characteristics and to leverage to workers unearthed an in-depth awareness and issues for the institutions and laws. Survey research methods to analyze the documents and government publications and research through an Internet search. Survey Research conducted a self - survey on new knowledge and attitude toward the concessionaires to sanitation target, the attitude of the sanitary administration, attitudes to hygiene education and hygiene practice Conditions received health education carried out by catering Federation regularly. Health education is a systematic settlement system for the external reality of professional education. Health and health administrators to establish an organizational structure strengthening phase. Employers and health care workers are raising awareness. Employers have a responsibility to prevent industrial accidents. Consequently, special health education targeted construction workers changed to fit the content-driven information on the species and the proper arrangement of time "based health education" currently being conducted.

• Wind and Structures
• /
• v.12 no.6
• /
• pp.505-517
• /
• 2009

Synchronous wind-induced pressures, measured in wind-tunnel tests on model buildings instrumented with hundreds of pressure taps, are an invaluable resource for designing safe buildings efficiently. They enable a much more detailed, accurate representation of the forces and moments that drive engineering design than conventional tables and graphs do. However, the very large volumes of data that such tests typically generate pose a challenge to their widespread use in practice. This paper explains how a wavelet representation for the time series of pressure measurements acquired at each tap can be used to compress the data drastically while preserving those features that are most influential for design, and also how it enables incremental data transmission, adaptable to the accuracy needs of each particular application. The loss incurred in such compression is tunable and known. Compression rates as high as 90% induce distortions that are statistically indistinguishable from the intrinsic variability of wind-tunnel testing, which we gauge based on an unusually large collection of replicated tests done under the same wind-tunnel conditions.

• Wind and Structures
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2020

Proper understanding of offshore wind speed variability is of essential importance in practice, which provides useful information to a wide range of coastal and marine activities. In this paper, long-term wind speed data recorded at various offshore stations are analyzed in the framework of fractal dimension analysis. Fractal analysis is a well-established data analysis tool, which is particularly suitable to determine the complexity in time series from a quantitative point of view. The fractal dimension is estimated using the conventional box-counting method. The results suggest that the wind speed data are generally fractals, which are likely to exhibit a persistent nature. The mean fractal dimension varies from 1.31 at an offshore weather station to 1.43 at an urban station, which is mainly associated with surface roughness condition. Monthly variability of fractal dimension at offshore stations is well-defined, which often possess larger values during hotter months and lower values during winter. This is partly attributed to the effect of thermal instability. In addition, with an increase in measurement interval, the mean and minimum fractal dimension decrease, whereas the maximum and coefficient of variation increase in parallel.

• Plant Journal
• /
• v.8 no.3
• /
• pp.42-48
• /
• 2012

Under traditional analysis of the capital budgeting, NPV, it is assumed that management cannot react to deviation from the expected scenario of cash flow at the time of evaluation. In practice, however, it is less likely that the expected scenario will come true when new information arrives and uncertainty is resolved. Uncertainty and risk can be influenced through 'managerial flexibility', which becomes a central instrument for value creation. Real option framework including option to defer, option for staged investment, option to alter, option to abandon, option to switch, etc. takes this managerial flexibility into account. Therefore, it is more appropriate to use real option method to evaluate the project than the traditional DCF(discounted cash flow) tool if the firm has high volatility of the expected returns.

• Structural Engineering and Mechanics
• /
• v.62 no.4
• /
• pp.417-430
• /
• 2017

Ultra high performance concrete (UHPC) has aroused interest around the world owing to superior mechanical and durability properties over conventional concrete. However, the application of UHPC in practice poses difficulties due to its inherent brittleness. UHPC filled in steel tube columns (UHPC-FSTCs) are capable of restricting the brittle failure of non-reinforced UHPC columns and forming a high performance member with enhancement of strength and ductility. Currently, research on UHPC-FSTCs remains very limited and there is relatively little information about the mechanical behavior of these columns. Therefore, this study presents a review of past experimental studies to have a deeper insight into the compressive behavior of UHPC-FSTCs under axial loading on entire section and on concrete core. Based on the test results obtained from Schneider (2006) and Xiong (2012), an analysis was conducted to investigate the influence of the confinement index (${\xi}$) and diameter to steel tube thickness ratio (D/t) on the strength and the ductility in short circular UHPC-FSTCs. Furthermore, the appropriateness of current design codes including EC4, AISC, AIJ and previous analytical models for estimating the ultimate loads of composite columns was also examined by the comparison between the predictions and the test results. Finally, simplified formulae for predicting the ultimate loads in two types of loading pattern were proposed and verified.