• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1999년도 하계 학술대회 논문집
• /
• pp.83-88
• /
• 1999

인발식 마늘 수확기의 기본개념은 마늘줄기가 인발 가이드를 따라 마늘줄기 인발부로 안내되어 지면 상방향으로 인발, 이송되는 방식으로서 인력에 의한 마늘수확 메카니즘과 유사하다. 그러나 수확기가 전진함에 따라 마늘이 연속적으로 인발되어 인력작업에 비해 매우 높은 수확능률을 갖는다. 또한 굴취식 수확기와 비교하여 연료가 절감되고 통마늘의 손상이 적은 장점이 있다. (중략)

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.384-389
• /
• 2003

전기가 공급되지 않는 농경지에 물을 공급하기 위해 태양열을 동력원으로 하고 저온에서 비등하는 물질을 작동물질로 하는 물펌프가 연구되어 왔다. 이와 관련하여 김 등(2002, 2003)은 펜탄을 작동물질로 한 태양열 물펌프 연구에서 에너지변환실험, 작동사이클의 열역학적인 해석, 장치의 설계를 수행한 바 있다. 본 연구에서는 펜탄을 작동물질로 한 태양열 물펌프를 실현하기 위하여 기존의 설계를 바탕으로 실험장치를 제작, 실험, 분석하였다. (중략)

• 기술혁신연구
• /
• 제9권2호
• /
• pp.56-76
• /
• 2001

The main purpose of this study is to analyse the digital divide and th determinants of ICT diffusion rate in Korean industries. We estimate the ICT diffusion function using the pooling data for this analysis. The results are as follows. First, the ICT capital accumulated in machinery & equipment, electrical machinery and construction industry is estimated to be 83% of total In capital stock in the 90s. Second, using the panel analysis, we find positive correlation among ICT diffusion, network effect and accumulation of human capital, which is more prominent in the service sector. Third, the estimation results show that the additional 1% increase of human capital accumulation will allow to increase the 0.69% of ICT capital intensity in Korean industries.

• 연구논문집
• /
• 통권26호
• /
• pp.69-84
• /
• 1996

Regional INformation Network Center has constructed integrated VAN among the heterogeneous computers and core technical information database for machinery & materials-oriented enterprises in the Changwon & Masan Industrial complex. As the result of RINNet project, regional industrial companies can take advantage of getting core technical information for developing new technology and strengthening competitive power. Accordingly, RINNet(Regional INformation Network for science & technology) makes regional industrial companies possible to collect, acquire and use technical information rapidly and motivates regional society to form the rapid technical interchange system and cooperative system among industrial-educational-institutal complex.

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.11-17
• /
• 2013

This study is aimed to construct a marine small hydro power plant using discharge water of fish farm in Jeju Haengwon-ri. The difference of design methods between marine small hydro power plant and land small hydro power plant is to consider the tides. Moreover, ground condition should be examined because gushout sea water comes out from the ground at high tide in Jeju as the ground of Jeju beach consists of basalt stone. From the field test of the turbine generator after construction of the power plant, output power and efficiency of the turbine generator shows good conformance to the required conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.381.1-381
• /
• 2002

The A lot of rotating machinery are generally used in industrial field and the electrical machinery such as the motor and generator account for the most of the part. Generally motor and generator have electrical loss because of eddy current. So silicon steel sheets are used in order to reduce the electrical loss and furthermore laminated rotor is used for motor and generator to eliminate the electrical loss and heat generation. (omitted)

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.375-382
• /
• 2013

Down through the years, human needs and desires have required a robot system to work at hazardous environments instead. Current painting task is costly and laborious, and it exposes workers to significant health and safety risks. Automation system offers potential improvement in this area and is especially well suited to the outer-wall painting tasks in concrete structures. This paper introduces the result of gondola-type building management robot(G-BMR) platform and mechanism for moving/tasking on building outer-wall for the outer-wall painting. Its technical and economic feasibility are conducted, and it is concluded that developing G-BMR is physically and economically feasible in this research. And we discuss about the future of G-BMR and automation in construction field.

• 한국유체기계학회 논문집
• /
• 제17권4호
• /
• pp.70-75
• /
• 2014

In this paper a analysis method is presented to obtain the steady state dynamic response from the finite element based equations of a rotor-bearing system with initial deflection. The method has been applied to analyze the dynamic response of the two-shaft rotor-bearing system with rigid coupling offset in a heavy duty gas turbine-generator. Bumps in the dynamic response of each rotor system have been observed at each critical speed due to the effect of initial deflection for rigid coupling offset. And, the dynamic responses have been shown to reduce for operating condition changes from cold to hot.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.169-171
• /
• 2012

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity per unit time, the coefficient figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-coefficient table for a Tub Grinder, domestic and overseas documentary records were investigated and on-going construction sites were also visited. The research found that the table can be revised by means of detailing down by several factors. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.