• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.118-129
• /
• 2011

This study is about the governor general's official residence and its garden in Yongsan that were constructed during the Japanese occupational time. The garden design drawing was also made while planning such Neo-Baroque style building, and it contains particular information of the garden unlike the other existing landscape drawings. The content of garden translated and landscape historical value drawn out by analysis of garden drawings, press articles and literatures are as follows; First, such governor general's official residence garden in Yongsan is likely to be the Korean first western style landscape form. For, from the point that it was completely constructed together with such official residential building in 1909, its construction time should be before that of the garden of Seokjojeon, Deoksu Palace, which was constructed in 1911. Second, it shows the garden style and garden planting factors introduced together with the modern architecture then. Such garden planting factors are placed from the center axis of the garden that is connected to the center of the building and monument as well. Such style and factors cover and show the flower bed appearing in Baroque style gardens, the monument that forms Vista playing the center of audience's vision, water space that is placed symmetrically against the axis, planting pattern that emphasizes the plants' space, flower bed shape and axis, and what kinds of plants were introduced then. Third, it shows the using pattern of western style gardens. Western style garden parties used to take in place in this garden while official dinner and reception were held in the evening in the official residence. Fourth, it shows the historical value as a modern landscape drawing, which is the Korean first landscape drawing that shows the plants' names and planting techniques marking the current height and planned height for change of topography and water system as a water landscape factor. That is, this drawing has the value that it was upgraded from the other existing ones that expressed only simple plants' symbols or flower bed shapes. I, therefore, hope that the studies on the modern landscape would be getting wider by excavation of new historical records in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.655-663
• /
• 2016

Increasing green house gas and it consequent climate change problems are discussed as a global issue. Accordingly, future local green house gas emission will increase up to 40% of the entire local green house gas emission and therefore, efforts to reduce the emission in construction industry is urgently required. Therefore, in this study, heating energy demand was analyzed by using the EnergyPlus simulation according to wood material finishes configuration. EnergyPlus has the entry for a variety of buildings and heating, ventilation, air conditioning (HAVC) system components, in particular buildings, air conditioning systems, and performs simultaneous integrated calculated through the feedback between the heat source unit, a verification program according to the ASHRAE Standard 140-2007 to be. The climate data for the simulation we used the data IWEC in Incheon and Gwangju provided by EnergyPlus. The analysis of simulation model was farm and fishing house standard design drawings: 2012, presented at the Korea Rural Community Corporation. The results of simulation of central region and southern region were effected by wood products of simulation model into the interior finish, exterior finish, windows, wooden structure. Also, it was confirmed that the reduced heating energy demand.

• 대한공업교육학회지
• /
• v.40 no.1
• /
• pp.105-120
• /
• 2015

The purpose of this study was to extract of Sub-elements of technological communication skills and to construct of a system model. In order to achieve the goal of the study, it was carried out in two steps: (1)Extraction sub-elements and definitions of technological communication skills, (2)Development of a system model of technological communication skills. Obtained conclusions by the process of this research were as follows. First, sub-elements of the technological communication skills were extracted and they were images, sketches, flowcharts, drawings, prototyping, symbols tables graphs and presentations. Second, using the 'technological communication tools' based on the "collaborative activities in online and offline', technological communication skills were defined as communication skills to be raised through the process of 'Idea through the Communication', 'Realization through the Communication', 'Wrap up through the Communication'. Third, technological communication skills were described as the system, in which 'Idea through the Communication(images, sketches, flowcharts)', 'Realization through the Communication(design, prototyping)', 'Wrap up through the Communication(symbol table graph, presentation)' were collaboratively activated. Fourth, checking tool for the technological communication skills was developed, based on checking tool for the existing communication skills and system model for technological communication skills. And it was improved by the expert validity test.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.1-13
• /
• 2018

This work discusses the major roles of digital technologies in the history of landscape architectural drawing, and offers a critique of the dominant trend towards realism in recent digital landscape representations. During the period of transition from conventional drawing tools, computer technologies generally functioned as mechanical tools to imitate prior manual techniques. Specifically, the GIS was served as a mechanical tool to efficiently process the manual layer cake; CAD software generally functioned to translate physical models to two-dimensional construction documents while graphic software generally functioned as a tool to perform processes similar to those of manual collage and montage techniques. Recent digital landscape drawings tend to adopt a realistic depiction like the painting of landscape appearance. In the representations, discernible traces of cutting and assembling are removed via graphic software; thus, the complete representations are perceived as if they were a copy of an actual landscape. The realistic images are an easy way to communicate with the public. However, it is difficult to achieve a full embodiment of all of the multisensory characteristics of a landscape through these visuals. They often deceive viewers by visualizing idealized conditions of not-yet-actualized landscapes and production of the final images takes up a large portion of the overall design process. Alternatively, 3D digital modeling of landscape performance and creative uses of digital technologies during the overall design process, as well as hybridized techniques with different drawing techniques and technologies, provide the opportunity to explore various aspects of a landscape.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.155-162
• /
• 2019

In Korea, the relevant laws and regulations for fire safety in buildings have been revised. Since 2011, Performance-based Design has been conducted for large-scale or high-rise buildings. However, the Korea's performance-based design is still at a level where life safety evaluation using fire and evacuation simulation tools is compared with existing methods. Although related studies have been conducted continuously for the mandatory performance-based design, the fact that it is relatively unsatisfactory for design and construction of fire-fighting facilities as it mainly focuses on administrative and institutional improvement measures or computer simulation. This study collected 91 performance-based design documents that were carried out nationwide at the initial stage of implementation until 2016 to analyze the status of performance-based design of fire-fighting facilities. As a result, fire-fighting facilities, except for fire extinguish system facilities, were not properly designed for performance. Furthermore, the designers found that if corresponding facilities or higher-level equipment with upgraded performance is additionally installed, the performance-based design fared well compared to the existing the prescriptive-based design.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.24-43
• /
• 2018

Thirty-five of Hwaban of Jeongjagak had been built in the last three hundred years, which means a Hwaban was made in almost every ten years. Jeongjagak is a building that requires a certain ornamentation having the identical Gongpo type, called E-ikgong, and maintains the same shape for a long time. While Hwaban is an element that faithfully serves the ornamental role, the field study found that Hwaban-chogak went through various changes over the years unlikely to Jeongjagak. This study enumerates and classifies the various types of Hwaban-chgak by outlining the similarities/differences of the various types of Hwavanchogak, and by discovering what the craftsmen aimed to express through the Hwaban-chogaks. As a result, Hwaban-chogak can be generally divided into two categories depending on the starting point of Chogak: 'Downward-Type' and 'Upward-type' and the study tried to find the origin of that. The first represents the stems of Hwaban crafts flowing from top to bottom, and the latter showing the opposite direction. Around 1740s Upward-type can be chronologically caragorised as; 'original- type' which contains lotus and 'modified- type' which eliminates lotus. It is inferred that the modified-type was caused by the employment system of the craftsmen. It is also recognized that the main frame of Hwaban-chogak had been maintained despite the fact that Chogak became increasingly ornamental for the next a hundred years from the Hwaban-chogak drawings in Whaseong-seongyeog-uigwe, which was completed in 1796. The study has a limitation that the focus of the research is only on the Hwaban of Jeongjagak and expected to look into Hwaban in the context of other construction elements such as Ikgong, Daegong and Anchogong for further studies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2021

Recently, the rapid proliferation, introduction, and application of the fourth industrial revolution technology has emerged as a trend in the construction market. Building Information Model (BIM) technology is a multidimensional information system that forms the basis of the fourth industrial revolution technology. The river sector utilizing this information-based system is also being actively reviewed, for example, the current measures for maintenance. In recent years, active research and current work should be done to reflect the need for river experts to introduce BIM into the river field. In addition, the development of tools and support software for establishing various information systems is essential for the activation of facility maintenance information systems reflecting advanced technology and to establish and operate management plans. A study on the maintenance of river facilities involves using existing drawings to build a three-dimensional (3D) information model, check the damage utilizing it, and inform it, and utilize it as the data for maintenance reinforcement. This study involved determining a method to build a river facility without the existing information system and using the property maintenance information with 3D modeling to provide a more effective and highly utilized management plan to check maintenance operations and manage damages.