• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2008.10a
• /
• pp.494-497
• /
• 2008

In Mobile ad hoc networks (MANET), nodes could transmit packets for each other to communicate beyond their transmission range without centralized control. Unlike infrastructure-based wireless networks, due to the unique characteristics of MANETs such as open network architecture, stringent resource constraints and highly dynamic network topology, networks are vulnerable to wormhole attacks launched through colluding nodes. In this paper, we develop an wormhole detection and prevention algorithm for MANET.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.257-266
• /
• 2012

A decode-and-forward two-way relay system benefits from orthogonal frequency division multiplexing (OFDM) and relay transmission. In this paper, we consider a decode-and-forward two-way relay system over OFDMwith two strategies: A joint subcarrier matching algorithm and a power allocation algorithm operating with a total power constraint for all subcarriers. The two strategies are studied based on average capacity using numerical analysis by uniformly allocating power constraints for each subcarrier matching group. An optimal subcarrier matching algorithm is proposed to match subcarriers in order of channel power gain for both transmission sides. Power allocation is defined based on equally distributing the capacity of each hop in each matching group. Afterward, a modified water-filling algorithm is also considered to allocate the power among all matching groups in order to increase the overall capacity of the network. Finally, Monte Carlo simulations are completed to confirm the numerical results and show the advantages of the joint subcarrier matching, power allocation and water filling algorithms, respectively.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.3
• /
• pp.195-199
• /
• 2014

Various M2M applications have different quality-of-service(QoS) requirements to be implemented practically. QoS requirements are normally data rate and delay constraint. However, there are limited number of wireless communication chip solutions which cannot support QoS requirements for all M2M application. Hence, aggregated usage of plural wireless communication chip solutions should be needed to implement M2M applications. In this paper, we consider the case that two wireless communication chips using random access protocol work together to transmit data of an M2M application. In such case, data rate and delay performance are mathematically analyzed. In our results, practical data rate can be improved from 2.5 to 7 times while delay constraints are satisfied if we simply use two wireless communication chips together.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.241-260
• /
• 2011

In earlier days, most of the data carried on communication networks was textual data requiring limited bandwidth. With the rise of multimedia and network technologies, the bandwidth requirements of data have increased considerably. If a network link at any time is not able to meet the minimum bandwidth requirement of data, data transmission at that path becomes difficult, which leads to network congestion. This causes delay in data transmission and might also lead to packet drops in the network. The retransmission of these lost packets would aggravate the situation and jam the network. In this paper, we aim at providing a solution to the problem of network congestion in mobile ad hoc networks [1, 2] by designing a protocol that performs routing intelligently and minimizes the delay in data transmission. Our Objective is to move the traffic away from the shortest path obtained by a suitable shortest path calculation algorithm to a less congested path so as to minimize the number of packet drops during data transmission and to avoid unnecessary delay. For this we have proposed a protocol named as Congestion Aware Selection Of Path With Efficient Routing (CASPER). Here, a router runs the shortest path algorithm after pruning those links that violate a given set of constraints. The proposed protocol has been compared with two link state protocols namely, OSPF [3, 4] and OLSR [5, 6, 7, 8].The results achieved show that our protocol performs better in terms of network throughput and transmission delay in case of bulky data transmission.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.12
• /
• pp.567-572
• /
• 2005

This paper presents a scheme to design optimal placement of phase-shifting transformers for power system congestion problems. A good design of phase-shifting transformers placement can improve total transfer capability in interconnected systems. In order to find the optimal placement of phase-shifting transformers, the power flows of the interesting transmission lines are evaluated using sequential quadratic programming technique. This algorithm considers power balance equations and security constraints such as voltage magnitudes and transmission line capacities. The proposed scheme is tested in 10 machines 39 buses and IEEE 57 buses systems. Test result shows that the proposed method can find the optimal placement of phase-shifting transformers to solver power system congestion problems.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2016

Ensuring the secure operation of power systems has become an important and critical matter during the present time, along with the development of large, complex and load-increasing systems. Security constraints such as the thermal limits of transmission lines and bus-voltage limits must be satisfied under all of a system’s operational conditions. An alternative solution to improve the security of a power system is the employment of Flexible Alternating-Current Transmission Systems (FACTS). FACTS devices can reduce the flows of heavily loaded lines, maintain the bus voltages at desired levels, and improve the stability of a power network. The Unified Power Flow Controller (UPFC) is a versatile FACTS device that can independently or simultaneously control the active power, the reactive power and the bus voltage; however, to achieve such functionality, it is very important to determine the optimal location of the UPFC device, with the appropriate parameter setting, in the power system. In this paper, a genetic algorithm (GA) method is applied to determine the optimal location of the UPFC device in a network for the enhancement of the power-system loadability and the minimization of the active power loss in the transmission line. To verify our approach, simulations were performed on the IEEE 14 Bus, 30 Bus, and 57 Bus test systems. The proposed work was implemented in the MATLAB platform.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.898-905
• /
• 2015

In this paper, we consider a joint beamforming and jamming design to enhance physical layer security against potential multiple eavesdroppers in a multiple-input and single-output cellular broadcast channel. With perfect channel state information at the base station, we propose various design approaches to improve the secrecy of the target user. Among the proposed approaches, the combined beamforming of maximum ratio transmission and zero-forcing transmission with a combination of maximum ratio jamming and zero-forcing jamming (MRT + ZFT with MRJ + ZFJ) shows the best security performance because it utilizes the full transmit antenna dimensions for beamforming and jamming with an efficient power allocation. The simulation results show that the secrecy rate of this particular proposed approach is better than the rates of the considered conventional approaches with quality-of-service and outage probability constraints.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.130-139
• /
• 2012

Energy harvesting has emerged as a powerful technology for complementing current battery-powered communication systems in order to extend their lifetime. In this paper a general framework is introduced for the optimization of communication systems in which the transmitter is able to harvest energy from its environment. Assuming that the energy arrival process is known non-causally at the transmitter, the structure of the optimal transmission scheme, which maximizes the amount of transmitted data by a given deadline, is identified. Our framework includes models with continuous energy arrival as well as battery constraints. A battery that suffers from energy leakage is studied further, and the optimal transmission scheme is characterized for a constant leakage rate.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.134-140
• /
• 2007

In recent years, power equipment and system standards have been increasing in both number and complexity. The standards that will soon be introduced to KOREA is the transmission system standards for harmonic emission limits assessing in distorting loads. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.591-599
• /
• 1994

A design system for power transmission bevel gears(straight, zerol, and spiral) is developed, in which the strength and durability of bevel gears can be estimated and the size of bevel gears can be minimized by introducing optimal techniques. The size of bevel gear pair as the object function to be minimized is the volume of equivalent spur gear pair at mean normal section, and the design variables to be determined are considered as the number of teeth, face width, diametral pitch, and spiral angle in spiral bevel gear. The strength(bending strength, pitting resistance) according to the AGMA standards, geometrical quantities, and operating characteristics(interference of pinion, contact ratio, etc.) are considered as the constraints in design optimization. The optimization with these constraints becomes nonlinear problem and that is solved with ALM(Augmented Lagrange Multiplier) method. The developed design method is applied to the example designs of straight, zerol, and spiral bevel gears. The design results are acceptable from the viewpoint of strength and durability within the design ranges of all other constraint, and the bevel gears are designed toward minimizing the size of gear pair. This design method is easily applicable to the design of bevel gears used as power transmitting devices in machineries, and is expected to be used for weight minimization of bevel gear unit.