• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.363-366
• /
• 1999

This paper describes the behavior of prestressed concrete storage tanks under cryogenic temperatures by thermal stress analysis. In concrete tanks to store up LNG, a thermal shock can occur over a global area resulting from the sudden filling of the outer tank with cryogenic storage contents. Analysis results show that internal surface of concrete tank is cooled down rapidly. Tank is subjected mostly to thermal constraint moment due to temperature gradient across its section. Constraint moment may cause tensile stresses beyond tensile strength in the wall. Problems related with concrete cracking due to temperature gradient have been considered.

• 대한토목학회논문집
• /
• 제26권4D호
• /
• pp.671-678
• /
• 2006

본 연구에서는 2개의 질량을 갖는 1/4 차량모델을 이용하여 차량-궤도-교량간의 동적상호작용 현상을 표현하기 위해 비선형 헤르츠 접촉스프링(Nonlinear Hertzian Contact Spring)과 비선형 접촉감쇠장치(Nonlinear Contact Damper)를 도입하였다. 또한, 차량에 작용하는 하중은 차량의 중량외에 임의시간단계의 차륜재하위치인 레일답면(즉, 주행로상의 접촉면)에서의 변위가 제한조건식(Constraint Equation)으로 가해졌다. 이 변위제한조건식은 Penalty방법(Penalty Method)에 의해 구현되었으며, 해의 안정화(Stabilization)를 위한 기법과 제한조건오차보정반력(Reaction from Constraint Violation)을 도입하였다. 또한, 차량의 피칭운동을 표현하고, 다양한 차량/열차를 모형화하기 위해서 1/4 차량모델의 차체 및 대차프레임 간을 강체연결 및 핀이 있는 강체연결조건으로 모형화하였다. 시간적분방법으로는 Newmark계열의 시간적분법이 사용되었으며, 해의 정확성 확보를 위해 국지적 오차평가에 근거한 적응적시간간격기법(Adaptive Time-Stepping Scheme)을 도입하였다. 이러한 적응적시간간격기법을 도입하여 동적해석에서 시간간격의 크기를 자동적으로 결정함으로써 동적해석에서의 해의 정확성을 확보하고 시간적분에 소요되는 계산비용을 감소시킬 수 있을 것으로 기대된다.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.135-146
• /
• 2002

The so-called overapplication of Coda Neutralization in Korean, the occurrence of a neutralized consonant in a non-neutralizing environment, is often considered as evidence for serial derivation. In this paper I propose that the neutralization effect at surface is not a result of a phonological process at an intermediate level in serial derivation, but due to a constraint requiring the integrity of the morphological constituent: EDGE-INTEGRITY. It is argued that this is not reducible to an alignment constraint, but a genuine faithfulness constraint on the edge of a morphological constituent. The putative opacity related with the coda neutralization is shown to be an epiphenomenon arising from the ambisyllabic representation of a consonant at a morphological juncture, satisfying both EDGE-INTEGRITY arid Syllabic Conditions. Consonant Copy in the Jeju dialect provides further evidence for EDGE-INTEGRITY, the Only difference being that the conflict between Syllabic Conditions and EDGE-INTEGRITY is resolved by insertion of a copied consonant.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.661-665
• /
• 1996

An inverse kinemetics problem of a reclaimer which digs and transports ironstones or coals in the raw yard is investigated. Because of the special features of the reclaimer of which scooping buckets are attached around the rotating drum at the end of boom, kinematic redundancy occurs in determining the joint varialbes For a given reclaiming point in space the forward kinematics yields 3 equations, however the number of involved variables in the equations are four. A plane equation approximating the surface near a reclaiming point is obtained by considering 8 adjacent points surrounding the reclaiming point. One extra equation to overcome redunduncyis further obtained from the condition that the normal vector at a reclaiming point is perpendicular to the plane. An approximate solution for a simplified problem is first discussed, Numerical solution for the oritinal nonlinear porblem with a constraint equation is also investigated. Finally a closed form solution which is not exact but sufficiently close enough is proposed by exploiting geometric constraint.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.167-174
• /
• 1998

This paper presents an unoccluded cylindrical object pose measurement using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. The elliptical equation parameters of a projected curve edge on a slice are calculated using LSM. The coefficients of standard elliptical equation are compared with these parameters to estimate the object pose. The hamming distances between the estimated coordinates and the calculated ones are extracted as measures to evaluate a local constraint and a smoothing surface curvature. The edges between slices are linked using error function based on the edge types and the hamming distances. The linked edges on slices are compared with the model object's length to recognize the unoccluded object. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as punch press operation or part assembly.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.143-157
• /
• 2010

This paper presents theoretical solutions for the three-dimensional (3D) stress field in an infinite isotropic elastic plate containing a through-the-thickness circular hole subjected to far-field in-plane loads by using Kane and Mindlin's assumption. The dangerous position, where the premature fracture or failure of the plate will take place, the expressions of the tangential stress at the surface of the hole and the out-of-plane stress constraint factor are found in a concise, explicit form. Based on the present theoretical solutions, a comprehensive analysis is performed on the deviated degree of the in-plane stresses from the related plane stress solutions, stress concentration and out-of-plane constraint, and the emphasis has been placed on the effects of the plate thickness, Poisson's ratio and the far-field in-plane loads on the stress field. The analytical solution shows that the effects of the plate thickness and Poisson's ratio on the deviation of the 3D in-plane stress components is obvious and could not be ignored, although their effects on distributions of the in-plane stress components are slight, and that the effect of the far-field in-plane loads is just on the contrary of that of the above two. When only the shear stress is loaded at far field, the stress concentration factor reach its peak value about 8.9% higher than that of the plane stress solutions, and the out-of-plane stress constraint factor can reach 1 at the surface of the hole and is the biggest among all cases considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1591-1596
• /
• 1991

The present paper describes a method of recognizing a polyhedron employing the notion of network constraint analysis. Typical difficulties in three-dimensional object recognition, other than shading, reflection, and hidden line problems, include the case where appearances of an object vary according to observation points and the case where an object to be recognized is occluded by other objects placed in its front, resulting in incomplete information on the object shape. These difficulties can, however, be solved to a large extent, by taking account of certain local constraints defined on a polyhedral shape. The present paper assumes a model-based vision employing an appearance-oriented model of a polyhedron which is provided by placing it at the origin of a large sphere and observing it from various positions on the surface of the sphere. The model is actually represented by the sets of adjacent faces pairs of the polyhedron observed from those positions. Since the shape of a projected face gives constraint to that of its adjacent face, this results in a local constraint relation between these faces. Each projected face of an unknown polyhedron on an acquired image is examined its match with those faces in the model, producing network constraint relations between faces in the image and faces in the model. Taking adjacency of faces into consideration, these network constraint relations are analyzed. And if the analysis finally provides a solution telling existence of one to one match of the faces between the unknown polyhedron and the model, the unknown polyhedron is understood to be one of those memorized models placed in a certain posture. In the performed experiment, a polyhedron was observed from 320 regularly arranged points on a sphere to provide its appearance model and a polyhedron with arbitrarily postured, occluded, or imposed another difficulty was successfully recognized.

• 한국CDE학회논문집
• /
• 제18권5호
• /
• pp.359-366
• /
• 2013

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.872-879
• /
• 2010

High rock-fill embankment is relatively flexible, which makes crest of embankment subject to excessive amplification in displacement due to earthquake loading. To overcome problems related with site response in high embankment, it is essential to evaluate shear-wave velocity profile of the embankment with improved accuracy and reliability. In this aspect, an experimental research was performed to answer how to perform surface-wave tests and to analyze measurements at an embankment site with a sloping ground surface. Unlike flat ground surface, sloping ground may hamper and slow down propagation of surface waves due to multiple reflections and refractions in embankment. To figure out this reasoning for the effect of multiple reflections and refractions due to sloping surface, surface wave tests were performed at a reservoir embankment of Chung-Song in North KyeongSang Province. Parameters involved in surface wave tests at non-flat surface, including source directionality, geometry-related constraint and frequency components in source function, were investigated using field measurements.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.148-155
• /
• 1998

For products of various shapes, compound surfaces are used. Blending surfaces are essential to the products of the compound surfaces. In this paper a method of making shape of blending surface flexible with parameter control is discussed. The parameter has quantitative control of shape of the blend. The blending surface is applied to NURBS and simple primitives in solid model. Intersection curves of surfaces is used to provide the blend with generality. Rail curve are found with the intersection curves. The blend is generated by rail curves and parameter control. Also, In strict constraint condition, blending surface with flexible shapes is discussed, keeping ;${GC}^1$ and ;${GC}^2$ continuity between free-formed surfaces and solids. Joining blending ,bridge blending and blending surface at corner are generated.