• 대한토목학회논문집
• /
• 제9권2호
• /
• pp.31-42
• /
• 1989

본(本) 논문(論文)에서는 동적하중(動的荷重)을 받는 콘크리트의 역학적(力學的) 거동(擧動)을 규명하기 위하여 일련의 실험 및 이론연구를 수행하였다. 실험연구(實驗硏究)에서는 하중(荷重)의 변형속도(變形速度)를 변화시켜 가며 역학적(力學的) 특성(特性)의 변화와 응력(應力)-변형(變形)관계를 조사분석하였다. 콘크리트의 이러한 동적거동(動的擧動)을 모델하기 위하여 본(本) 논문(論文)에서는 점소성이론에 근거를 둔 새로운 이론을 유도하였다. 본 논문에서 유도된 구성방정식( 構成方程式)은 변형속도(變形速度)와 응력완화함수의 함수로 표시(表示)된다. 본(本) 이론(理論)을 본(本) 연구(硏究)의 실험자료(實驗資料)와 비교(比較)한 결과(結果) 본(本) 이론(理論)이 실험결과를 비교적 잘 서술하는 것으로 나타났다. 본(本) 연구결과(硏究結果) 변형속도(變形速度)가 증가함에 따라 콘크리트의 강도(强度)가 증가하며, 동적강도(動的强度)의 증가율이 압축하중보다 인장하중에서 더욱 큰 것으로 밝혀졌다. 본(本) 연구(硏究)의 실험결과 및 이론모델은 콘크리트구조물(構趙物)의 동적거동(動的擧動) 규명에 유용한 기초를 제공할 것으로 사료된다.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.287-293
• /
• 2011

본 연구에서는 교량의 진동을 이용한 압전 외팔보 에너지 수확장치의 적용성을 연구하였다. 이를 위하여 압전 소자의 구성방정식과 외팔보의 진동방정식을 결합하여 외팔보의 단일 모드에 대한 연성 방정식을 행렬 형태로 구성하였다. 그리고 에너지 수확장치의 가진기 실험을 통하여 해석 모델의 타당성을 검증하였다. KTX, 새마을, 무궁화 열차가 주행할 때 측정된 교량 가속도를 바탕으로 수치해석을 통하여 산정한 에너지 수확장치의 최대 전력은 각각 28.5 mW, 0.65 mW, 0.51 mW로 나타났다. 이를 볼 때 철도와 같은 이동하중에 의한 교량의 진동은 가진 진동수와 가속도가 낮고 지속시간이 짧아서 에너지 공급원으로서 효율성이 떨어지는 것으로 판단된다.

• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.163-170
• /
• 2008

혼합 보 이론과 적정변형 보 이론에 입각한 공탄성 해석 시스템을 결합하여 유연면을 갖는 복합재료 무힌지 로터에 대한 정지 및 전진 비행시의 공탄성 해석을 수행하였다. 블레이드에 작용하는 공기력은 Leishman-Beddoes의 비정상 공력 모델을 이용하여 구했다. 인장, 회전면 내외의 굽힘, 그리고 비틀림이 상호 연계된 블레이드에 대한 운동방정식은 Hamilton의 원리에 입각하여 유도하였다. 헬리콥터 블레이드의 공탄성 해석에 주요한 요소들인 단면 벽의 두께, 탄성연계, 그리고 구성방정식에 대한 적합한 가정과 같은 주요 구조 모델링 문제들에 대한 효과들을 고찰하였다. 이러한 요소들은 블레이드 단면의 복합재료 적층 구조에 민감하게 반응하며, 블레이드 안정성에도 적지 않은 영향을 나타냄을 보였다.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.997-1016
• /
• 2015

The contribution of tensioned concrete between cracks (tension-stiffening) cannot be ignored when analysing deformation of reinforced concrete elements. The tension-stiffening effect is crucial when it comes to adequately estimating the load-deformation response of steel reinforced concrete and the more recently appeared fibre reinforced polymer (FRP) reinforced concrete. This paper presents a unified methodology for numerical modelling of the tension-stiffening effect in steel as well as FRP reinforced flexural members using the concept of equivalent deformation modulus and the smeared crack approach to obtain a modified stress-strain relation of the reinforcement. A closed-form solution for the equivalent secant modulus of deformation of the tensioned reinforcement is proposed for rectangular sections taking the Eurocode 2 curvature prediction technique as the reference. Using equations based on general principles of structural mechanics, the main influencing parameters are obtained. It is found that the ratio between the equivalent stiffness and the initial stiffness basically depends on the product of the modular ratio and reinforcement ratio ($n{\rho}$), the effective-to-total depth ratio (d/h), and the level of loading. The proposed methodology is adequate for numerical modelling of tension-stiffening for different FRP and steel reinforcement, under both service and ultimate conditions. Comparison of the predicted and experimental data obtained by the authors indicates that the proposed methodology is capable to adequately model the tension-stiffening effect in beams reinforced with FRP or steel bars within wide range of loading.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.571-585
• /
• 2016

The crest of the Pubugou central core rockfill dam (CCRD) cracked in the first and second impounding periods. To evaluate the safety of the Pubugou CCRD, an inversion analysis of the constitutive model parameters for rockfill materials is performed based on the in situ deformation monitoring data. The aim of this work is to truly reflect the deformation state of the Pubugou CCRD and determine the causes of the dam crest cracks. A novel real-coded genetic algorithm based upon the differences in gene fragments (DGFX) is proposed. It is used in combination with the radial based function neural network (RBFNN) to perform the parameters back analysis. The simulated settlements show good agreements with the monitoring data, illustrating that the back analysis is reasonable and accurate. Furthermore, the deformation gradient of the dam crest has been analysed. The dam crest has a great possibility of cracking due to the uncoordinated deformation, which agrees well with the field investigation. The deformation gradient decreases to the value lower than the critical one and reaches a stable state after the second full reservoir.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.53-62
• /
• 2010

An airbag is composed of housing assembly, door assembly, cushion assembly, and an inflator. The inflator is the essential part that generates gas for airbag. When an airbag is activated, it effectively absorbs the crash energy of the passenger by inflating a cushion. In this study, tank tests were performed with newly synthesized propellants with various compositions, and the results are compared with the numerical results. In the simulation of inflator, a zonal model has been adopted which consisted of four zones of flow regions: combustion chamber, filter, gas plenum, and discharge tank. Each zone was described by the conservation equations with specified constitutive relations for gas. The pressure and temperature of each zone of the inflator were calculated and analyzed and the results were compared with the tank test data. In the zone of discharge tank the pressure quickly rose, the pattern of pressure curve was very similar to the pressure curve of real test. And in zone 1 & 2 & 3 the mass of products was increased and decreased with time. In zone 4, the mass of products was increased with time like real inflator. From the similarity of pressure curve in zone 4 and closed bomb calculation the modeled results are well correlated with the experimental values.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1069-1089
• /
• 2015

This paper presents average numerical results of 2128 nonlinear dynamic finite element (FE) analyses of lightweight acceleration-sensitive non-structural components (NSCs) attached to the floors of one-bay three-storey reinforced concrete (RC) primary structures (P-structures) with different eccentricity ratios. The investigated parameters include the NSC to P-structure vibration period ratio, peak ground acceleration, P-structure eccentricity ratio, and NSC damping ratio. Appropriate constitutive relationships were used to model the behaviour of the RC P-structures. The NSCs were modelled as vertical cantilevers fixed at their bases with masses on the free ends and varying lengths so as to match the vibration periods of the P-structures. Full dynamic interaction was considered between the NSCs and P-structures. A set of seven natural bi-directional ground motions were used to evaluate the seismic response of the NSCs. The numerical results show that the acceleration response of the NSCs depends on the investigated parameters. The accelerations of the NSCs attached to the flexible sides of the P-structures increased with the increase in peak ground acceleration and P-structure eccentricity ratio but decreased with the increase in NSC damping ratio. Comparison between the FE results and Eurocode 8 (EC8) predictions suggests that, under tuned conditions, EC8 provisions underestimate the seismic response of the NSCs mounted on the flexible sides of the plan-irregular RC P-structures.

• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.299-312
• /
• 2018

In this paper, an extended finite element method is proposed to analyze both geometric and material non-linear behavior of general Functionally Graded Material (FGM) plate-shell type structures. A user defined subroutine (UMAT) is developed and implemented in Abaqus/Standard to study the elastoplastic behavior of the ceramic particle-reinforced metal-matrix FGM plates-shells. The standard quadrilateral 4-nodes shell element with three rotational and three translational degrees of freedom per node, S4, is extended in the present study, to deal with elasto-plastic analysis of geometrically non-linear FGM plate-shell structures. The elastoplastic material properties are assumed to vary smoothly through the thickness of the plate-shell type structures. The nonlinear approach is based on Mori-Tanaka model to underline micromechanics and locally determine the effective FGM properties and self-consistent method of Suquet for the homogenization of the stress-field. The elasto-plastic behavior of the ceramic/metal FGM is assumed to follow Ludwik hardening law. An incremental formulation of the elasto-plastic constitutive relation is developed to predict the tangent operator. In order to to highlight the effectiveness and the accuracy of the present finite element procedure, numerical examples of geometrically non-linear elastoplastic functionally graded plates and shells are presented. The effects of the geometrical parameters and the volume fraction index on nonlinear responses are performed.

• 한국과학교육학회지
• /
• 제15권1호
• /
• pp.54-67
• /
• 1995

This study has been performed in order to achieve three objectives. They are as follows: To analyze, based on the research literatures, the nature of scientific inquiry ability and the characteristics of its constitutive elements. To identify inquiry skills and techniques essential to such areas as physics, chemistry, biology, and earth science. To develop instructional models and materials for enhancing inquiry ability on the part of high school students. It was found in the study that the scientific inquiry was interpreted in terms of different meanings according to the viewpoint of the person who are interested in the nature of science. The scientific inquiry has been viewed as the process of knowledge formation, scientific method, inquiry process or process skills depending on the epistemological, methodological, educational perspectives, respectively. It was also identified that certain kind of skills or techniques would be used for inquiry in only one specific area of the science. The skills and techniques are effectively learned when those are taught with specific knowledge in each area of the science. The model and materials for fostering scientific inquiry skills will be presented on the second part of the report.

• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.773-780
• /
• 2009

강-콘크리트 계면거동의 성질을 정의하는 계면변수를 파악하고, 구성모델의 성격을 정의하는 구성변수의 물리적 특성 파악과 값의 크기를 결정하기 위해 강-콘크리트 계면에 대한 거동실험을 수행하였다. 구성변수는 포괄적인 적용을 목적으로 부착계면 뿐만 아니라 비부착계면의 거동까지 포함하기 위해 최근에 Mohr-Coulomb 파괴규준에 근거하여 제안된 구성모델을 기준하여 결정하였으며, 구속압을 받는 계면의 취성으로부터 연성까지의 파괴거동 성질을 고려하기 위해 낮은 구속압 및 중간크기의 구속압을 포함하는 네 종류의 구속압을 고려하였다. 실험 결과에 대한 분석을 통해 최대평균전단응력과 잔류응력 및 모드 II 파괴에너지 방출률과 구속압 간의 관계는 각 경우가 선형적 관계에 있음을 확인하였다. 이 논문에서 얻어진 실험 결과에 근거하여 이어지는 후속 논문에서는 해석적 방법에 의한 계면상수 값의 결정과 결정된 계면상수 값을 이용한 계면유한요소해석을 수행하여 계면상수 값의 적절성을 검증하였다.