• Korean Journal of Community Nutrition
• /
• v.14 no.3
• /
• pp.316-326
• /
• 2009

The purposes of this study were to identify the significance of a nutrition teacher, to analyze the importance of competence as a nutrition teacher and to evaluate the importance and difficulty for duties of nutrition teachers. The questionnaire was distributed to 554 preliminary teachers and a total of 468 usable data were collected with 84.5% of response rate from August to October 2006. The statistical data analysis was completed by using SPSS Win (ver. 10.0) for descriptive analysis, t-test, ANOVA and ${\chi}^2-test$. The results were as follows: Preliminary nutrition teachers expected that conversion of a school dietitian into a nutrition teacher could lead to systematic and constant nutrition education and come into synergic effect by doing meal service with nutrition education. For a teacher's competence, all three paradigms were perceived as important. It was evaluated to be high for a knowledge factor in the empirical analytic paradigm, a personality factor in the practical interpretive paradigm and an attitude factor in the critical emancipatory paradigm. And 'a knowledge for nutrition and sanitation (4.59)' and 'an ability to raise a self-management capacity for right food habit and dietary life (4.59)' were showed as most important in a nutrition teacher. It appeared that both important and difficult duties of nutrition teachers were nutrition education, nutrition counseling and sanitation quality of nutrition education; the most necessary solution was to develop a reference and program for nutrition education (37.4%). In conclusion, the systematic supports of district offices of education and associated institutions as well as sustained efforts of preliminary nutrition teachers for themselves should lead to establish a successful system of nutrition teachers.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.62-70
• /
• 2020

Here in this work, a 4-chlorophenol (4-CP)-degrading bacterial strain Bacillus subtilis (B. subtilis) MF447840.1 was isolated from the drain outside the Hyundai car service center, Agartala, Tripura, India. 16S rDNA technique used carried out for genomic recognition of the bacterial species. Isolated bacterial strain was phylogenetically related with B. subtilis. This strain was capable of breaking down both phenol and 4-CP at the concentration of 1,000 mg/L. Also, the isolated strain can able to metabolize five diverse aromatic molecules such as 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, 4-nitrophenol, and pentachlorophenol for their growth. An extensive investigation was performed to portray the kinetics of cell growth along with 4-CP degradation in the batch study utilizing 4-CP as substrate. Various unstructured models were applied to evaluate the intrinsic kinetic factors. Levenspiel's model demonstrates a comparatively enhanced R² value (0.997) amongst every analyzed model. The data of specific growth rate (μ), saturation constant (K_S), and Y_X/S were 0.11 h^-1, 39.88 mg/L, along with 0.53 g/g, correspondingly. The isolated strain degrades 1,000 mg/L of 4-CP within 40 h. Therefore, B. subtilis MF447840.1 was considered a potential candidate for 4-CP degradation.

• International Journal of Knowledge Content Development & Technology
• /
• v.11 no.3
• /
• pp.7-27
• /
• 2021

This study was carried out to examine the awareness and use of social media tools by library and information professionals (LIPs) in selected academic libraries in South-west, Nigeria and the challenges they face in the use of social media technologies. Descriptive survey was adopted for this study. The population of the study comprised 217 library and information professionals from 10 selected academic libraries in south-west, Nigeria. A total enumeration technique was used to cover all the library and information professionals, 136 respondents filled and returned the questionnaire, given a response rate of 62.7%. The questionnaire was used as instrument for data collection. Descriptive statistics was used to analyze the data collected. The findings show that majority of LIPs possessed a high level of awareness in the use of social media tools. The study also revealed that social network tools were highly used by LIPs in the academic libraries studied and the types of social media used by LIPs was also revealed. The major challenges faced in the use of social media include inadequate power supply, lack of Internet access and time constraints. The paper recommended that to enhance the use of social media by LIPs, there is need for constant awareness of the importance of social media tools to LIPs and libraries in effective service delivery, LIPs should be ready to learn, unlearn and be learned in the use of social media and university libraries should provide enabling environment such as internet connectivity, power supply and policy to guide LIPs in social media usage.

• Journal of Surface Science and Engineering
• /
• v.51 no.6
• /
• pp.415-420
• /
• 2018

The possibility of an improvement in heat dissipation performance of aluminum alloy heat sink for shipboard LED luminaries through plasma electrolytic oxidation (PEO) was investigated. Four different PEO coatings were produced on aluminum alloy 5052 in silicate based alkaline solution by varying current density ($50{\sim}200mA/cm^2$). On voltage-time response curves, three stages were clearly distinguished at all current densities, namely an initial linear increase, slowdown of increase rate, and steady state(constant voltage). It was found that the increase in current density caused the breakdown voltage to increase. Two different surface morphologies - coralline porous structure and pancake structure - were confirmed by SEM examination. The coralline porous structure was predominant in the coatings produced at lower current densities (50 and $100mA/cm^2$) while under high current densities(150 and $200mA/cm^2$) the pancake structure became dominant. The coating thickness was measured and found to be in a range between about $13{\mu}m$ and $44{\mu}m$, showing increasing thickness with increasing current density. As a result, $100mA/cm^2$ was proposed as an effective process parameter to improve the heat dissipation performance of aluminum alloy heat sink, which could lower the LED operating temperature by about 30%.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.315-323
• /
• 2023

The brassica leaf beetle, Phaedon brassicae Baly (Coleoptera: Chrysomelidae), is one of the important pests infesting cruciferous vegetables. In order to understand the biological characteristics of the insect, we investigated the effects of temperature on development of each life stage, adult longevity and fecundity of P. brassicae at four constant temperatures of 15, 20, 25 and 27.5℃ for immature life stage and five constant different temperatures of 10, 15, 20, 25 and 27.5℃ for adult stage. Eggs and larvae successfully developed next life stage at temperature tested. The development period of egg, larva, and pupa decreased as temperature increased. Lower developmental threshold (LDT) and thermal constant (K) were calculated using linear regression as 8.7℃ and 344.73DD, respectively. Lower and higher threshold temperature (TL and TH) from egg to adult emergence were estimated by Briere function as 5.3℃ and 40.4℃, respectively. Adults produced eggs at the temperature range between 10℃ and 27.5℃, and showed an estimated maximum number, ca. 627.5 eggs at 21.7℃. Adult oviposition models including aging rate, age-specific survival rate, age-specific cumulative oviposition, and temperature-dependent fecundity were constructed. Temperature-dependent development models and adult oviposition models would be useful components to understand the population dynamics of P. brassicae and to establish the strategy of integrated pest management in cruciferous crops.

• The Journal of Fisheries Business Administration
• /
• v.14 no.2
• /
• pp.15-68
• /
• 1983

From the economic point of view the fishing port is the complex of installations on land, organized to serve the fishing fleet and its cargo, and is the main link in the production chain of all components of the fishing industry, with the aim of achieving the planned targets with the minimum cost. Fishing port investment decisions have had significant impact on the development aims of Korean fisheries. Fishing port investments in Korea are made mostly by public or semipublic port authorities. Such investments should be judged not purely on the basis of financial profitability but rather on the extent to which they serve the development aims of the fishing industry. This makes the economic appraisal process more complex and presents certain problems in correctly quantifying the economic costs and benefits of the fishing port projects. This study concentrates more on the theoretical economic appraisal models than on the purely financial aspects of fishing port investments and points out the difference between the two approaches. In the result, there is clearly an element of judgment as to whether or not a shadow price needs to be used in estimating economic benefits and costs. From this viewpoint, some attempts are made to provide definitions of the possible economic benefits and costs, and methods for estimating and evaluating them in Part III and IV. Especially queueing theory is applied in the calculation of economic benefits. When a project is contemplated and analysis shows it to Lave a positive NPV, one question that arises is whether it should be implemented now or delayed. In this paper, the first year rate of return method is regarded as a more concise way of solving the timing of investment, At the end of Part IV, risk analysis of fishing port investments is considered. It can be handled in a number of ways, ranging from informal judgment to complex statistical analyses involving large-scale computer models, This paper recommends that evaluators of fishing port investments use the sensitivity analysis indicating exactly how much NPV will change in response to a given change in an input variable, other things held constant. Decisions regarding the amount of capacity to provide must be made in fishing port investments. Providing too much service would involve excessive capital costs. On the other hand, not providing enough service capacity would cause the waiting line of fishing vessels to become excessively long at times. Therefore, in Part V, the optimal number of berths and berth productivity in fishing port are defined as follows: Minimize E(TC) ＝ E(WC)＋E(SC) The minimum of this function is the solution and that is the optimal number of berth and berth productivity in fishing port.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.285-291
• /
• 2015

FTMS, TCS, ITS equipment such as high-pass highway are just a situation that does not lack traceability and passive surveillance is related to fault DB has so far consisted of an integrated operations management to maximize utilization of the facility. In addition, there is no replacement parts are replaced when a failure occurs, increasing the number of parts and repair time I have trouble growing, and becoming a service interruption whenever you replace each time. In this study, proactively manage the failure history of a highway facility ITS tries to preventive maintenance. Therefore, the error history is based on the reliability of the high-pass facilities theory to calculate the reliability of the system through a systematic statistical analysis Operational Availability. The fault number and the time the replacement period through the estimate decreases and can reduce the budget expenses by securing the spare parts quantity, establish a management plan in part by improving the quality of the system through constant preventive maintenance, quality of service at all times It may direct the non-stop operation state of the available state.

• Journal of Internet Computing and Services
• /
• v.11 no.3
• /
• pp.87-103
• /
• 2010

In the study, we introduce the trend in domestic and foreign web accessibility, as well as the legal system that ensures web accessibility. Based on Korean Web Content Accessibility Guidelines (KWCAG)1.0, we investigated the web content accessibility of 80 tertiary health-care hospitals and general hospitals in Korea. We evaluated accessibility by combining accessibility-based criteria (ABC) with usability-based criteria (UBC). ABC was limited to an alternative text for Guideline 1, using a small number of frames and keyboard accessibility for Guideline 2. UBC checked the voice service (TTS), resizing text, providing multi-lingual websites, and disclosing web accessibility policy. KADO-WAH2.0 was used for representing the compliance rate. The evaluation result was a considerable improvement from previous results, even though the rate of compliance with web accessibility was generally insufficient. There was a significant difference between those medical centers which did and did not comply with web accessibility. Incidentally, many hospitals were found to have attempted to confront and come to terms with web accessibility. In future, the following factors are advisable for medical centers with publicity or public interest: they must employ active and aggressive promotion of establishment of independent accessibility guidelines to secure web accessibility, they should effect an improvement of the realization of web accessibility, there can be constant education and promotion, and there can be an institutional supplementation, as well as others.

• Journal of Environmental Impact Assessment
• /
• v.29 no.2
• /
• pp.122-131
• /
• 2020

Marine Spatial Planning is an emerging strategy that promoting sustainable development at coastal and marine areas based on the concept of ecosystem services. Regarding its methodology, usage rate of resources and its impact should be considered in the process of spatial planning. Particularly, considering the rapid increase of coastal tourism, visitation pattern is required to be identified across coastal areas. However, actions to quantify visitation pattern have been limited due to its required high cost and labor for conducting extensive field-study. In this regard, this study aimed to pose the usage of social big data in Marine Spatial Planning to identify spatial visitation density and critical management zone throughout coastal areas. We suggested the usage of GPS information from Flickr and Twitter, and evaluated the critical management zone by applying spatial statistics and density analysis. This study's results clearly showed the coastal areas having relatively high visitors in the southern sea of South Korea. Applied Flickr and Twitter information showed high correlation with field data, when proxy excluding over-estimation was applied and appropriate grid-scale was identified in assessment approach. Overall, this study offers insights to use social big data in Marine Spatial Planning for reflecting size and usage rate of coastal tourism, which can be used to designate conservation area and critical zones forintensive management to promote constant supply of cultural services.