• 한국환경과학회지
• /
• 제30권6호
• /
• pp.429-439
• /
• 2021

Food waste is both an industrial and residential source of pollution, and there has been a great need for food waste reduction. As a preliminary step in this study, waste reduction is quantitatively modeled. This study presents two models based on kinetics: a simple kinetic model and a mass transport-shrinking model. In the simple kinetic model, the smaller is the reaction rate constant ratio k₁, the lower the rate of conversion from the raw material to intermediate products. Accordingly, the total elapsed reaction time becomes shorter. In the mass transport-shrinking model, the smaller is the microbial decomposition resistance versus the liquid mass transfer resistance, the greater is the reduction rate of the radius of spherical waste particles. Results showed that the computed reduction of waste mass in the second model agreed reasonably with that obtained from a few experimantal trials of biodegradation, in which the microbial effect appeared to dominate. All calculations were performed using MATLAB 2020 on PC.

• 생태와환경
• /
• 제39권4호통권118호
• /
• pp.450-461
• /
• 2006

본 연구에서는 pH 5.5에서 연안퇴적물내 납과 카드뮴의 흡착 동력학을 실험실규모의 회분식 반응기를 이용하여 조사하였다. 4종류의 모델: 단일영역 물질전달모델 (one-site mass transfer model, OSMTM), 겉보기 1차속도모델 (pseudo-first-order kinetic model, PFOKM), 겉보기 2차속도모델 (pseudo-second-order kinetic model, PSOKM)과 두영역 1차속도모델 (two compartment first-order kinetic model, TCFOKM)을 사용하여 흡착속도를 분석하였다. 관련된 모델매개변수의 수에서 기대되듯이 변수가 3개인 TCFOKM이 변수가 2개인 OSMTM, PFOKM, PSOKM 보다 흡착속도를 더 잘 표현할 수 있었다. 납과 카드뮴의 대부분의 흡착은 초기 3시간 이내에 빠르게 완료되었으며, 이후 기간 동안은 느린 흡착이 이루어졌다. 모든 모델에서 겉보기 흡착평형농도($q_{e,s}$)는 퇴적물의 양이온 교환능 (CEC)과 표면적이 증가함에 따라 증가하는 것으로 예측되었으며, 이는 초기 중금속 투여 농도와 중금속 및 퇴적물의 형태와 무관하였다. OSMTM에서의 흡착속도 상수 ($k_s,\;hr^{-1}$)는 퇴적물의 CEC와 표면적이 증가함에 따라 증가하였다. PFOKM의 겉보기 1차흡착속도상수 ($k_{p1,s},\;hr^{-1}$)는 퇴적물의 특성과 관련이 없었다. PSOM 분석결과 겉보기 2차흡착속도상수 ($k_{p2,s},\;g\;mmol^{-1}\;hr^{-1}$)와 초기흡착속도 ($v_{o,s},\;mg\;g^{-1}\;hr^{-1}$)는 퇴적물의 특성과 연관되지 않았다. TCFOKM의 빠른 흡착영역의 분율($f_{1,s}$)은 수용액상의 초기농도와는 무관하게 퇴적물의 CEC와 표면적이 증가함에 따라 증가하였다. 빠른 부분에서의 흡착속도 상수 ($k_{1,s}=10^{0.1}-10^{1.0}\;hr^{-1}$)는 느린 부분에서의 흡착속도 상수 ($k_{2,s}=10^{-2}-10^{-4}\;hr^{-1}$)보다 훨씬 더 큰 것으로 나타났다.

• 한국식품과학회지
• /
• 제37권6호
• /
• pp.1012-1017
• /
• 2005

게맛살로부터 분리한 주요 부패세균은 내열성 포자를 형성하는 Bacillus subtilis와 Bacillus licheniformis로 동정되었다. 게맛살의 제조 공정상 가열 처리 과정에서 B. subtilis와 B. Licheniformis 등 내열성 포자를 형성하는 균을 완전히 사멸시키기는 어려우며, 살아남은 포자는 유통과정 중, 적정 온도와 시간이 경과함에 따라, 영향 세포로 발아하여 게맛살의 부패에 영향을 미친다. 이러한 부패세균의 증식에 있어서 초기균수와 온도의 영향을 조사한 결과, 초기균수에 따른 최대증식속도상수(k)와 유도기(LT), 세대시간(GT)은 유의적인 차이가 없었으며, 온도의 영향이 지배적인 것으로 나타났다. 또한 본 실험에서 유도기(LT)와 온도의 관계는 $L(hr)=2.5219e^{-0.2467{\cdot}T}$의 관계가 성립하며, square root model과 polynomial model을 이용, 온도와 초기균수에 대한 최대증식속도상수(k)를 정량화한 정량평가모델을 개발하였으며, 그 식은 다음과 같다. $$Square\;root\;model:\;{\sqrt{k}}=0.0267\;(T-3.5089)$$ $$Polynomial model:\;k=-0.2160+0.0241T-0.01999A_0$$ 온도와 초기균수에 대한 최대증식속도상수(k)의 정량평가모델로부터 특정온도와 초기 균수에서 최대증식속도상수(k)를 계산할 수 있으며, 계산된 최대증식속도상수(k)를 균의 기본 증식 모델인 Gomperz model에 적용하여 균의 성장을 예측할 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권3호
• /
• pp.171-181
• /
• 2012

In the new video coding standard, called high efficiency video coding (HEVC), the coding unit (CU) is adopted as a basic unit of a coded block structure. Therefore, the rate control (RC) methods of H.264/AVC, whose basic unit is a macroblock, cannot be applied directly to HEVC. This paper proposes the largest CU (LCU) level RC method for hierarchical video coding in a HEVC. In the proposed method, the effective bit allocation is performed first based on the hierarchical structure, and the quantization parameters (QP) are then determined using the Cauchy density based rate-quantization (RQ) model. A novel method based on the linear rate model is introduced to estimate the parameters of the Cauchy density based RQ model precisely. The experimental results show that the proposed RC method not only controls the bitrate accurately, but also generates a constant number of bits per second with less degradation of the decoded picture quality than with the fixed QP coding and latest RC method for HEVC.

• 대한전기학회논문지
• /
• 제33권3호
• /
• pp.100-105
• /
• 1984

The optimal Load-Frequency Control law is presented with the performance criterion which includes the changing rate of governor speed. The authors propose two controllers. One is a dynamic controller using the method of state augmentation and the other is a constant gain controller with use of the trace function lemma by Kleinman. For a more practical realization, a reduced-order Luenberger observer is applied in order to identify unmeasurable states and power demand. The control schemees presented here are tested through the model developed by Elgerd, and the usefulness is demonstrated.

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.137-143
• /
• 2013

To improve annular jet pump (AJP) performance, new ways named constant rate of velocity/pressure change method (CRVC/CRPC) were adopted to design its diffuser. The design formulas were derived according to the assumption of linear velocity/pressure variation in the diffuser. Based on the two-dimensional numerical simulations, the effect of the diffuser profile and the included angle on the pump performance and the internal flow details has been analyzed. The predicted results of the RNG k-epsilon turbulence model show a better agreement with the experiment data than that of the standard and the realizable k-epsilon turbulence models. The AJP with the CRPC diffuser produces a linear pressure increase in the CRPC diffuser as expected. The AJP with CRPC/CRVC diffuser has better performance when the diffuser included angle is greater or the diffuser length is shorter. Therefore, the AJP with CRPC/CRVC diffuser is suitable for applications requiring space limitation and weight restriction.

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.71-77
• /
• 2007

This paper is to investigate the effect of the curing temperature on strength development of concrete incorporating cement kiln dust(CKD) and blast furnace slag (BS) quantitatively. Estimation of the compressive strength of the concrete was conducted using the equivalent age equation and the rate constant model proposed by Carino. Correction of Carino model was studied to secure the accuracy of strength development estimation by introducing correction factors regarding rate constant and age. An increasing curing temperature results in an increase in strength at early age, but with the elapse of age, strength development at high curing temperature decreases compared with that at low curing temperature. Especially, the use of BS has a remarkable strength development at early age and even at later age, high strength is maintained due to accelerated pozzolanic activity resulting from high temperature. Whereas, at low curing temperature, the use of BS leads to a decrease in compressive strength. Accordingly, much attention should be paid to prevent strength loss at low temperature. Based on the strength development estimation using equivalent age equation, good agreements between measured strength and calculated strength are obtained.

• The Korean Journal of Ecology
• /
• 제4권1_2호
• /
• pp.38-51
• /
• 1981

The present investigation was estimated the effect of temperature, precipitatiion, and time on the decomposition of litters with litter bags of Pinus densiffora and Quercus mongolica at Gure where elevation in 50m, and at Nogodan where elevation in 1300m on Mt. Jiri. As the above results, decomposition model was proposed to relation of the environmental conditions. And was investigated the production and decomposition of litters from the stands of various forest communities in Kwangneung, Mt. Jiri and Mt. Halla. The results are as follows; The models for the decay of organic carbon (C) was as follows: $C=Coe^{-Kt}$ (limiting factor;time) $C=Coe^{-K'te}$ (limiting factor;tempedrature) $C=Coe^{-KnP}$ (limiting factor:precipitation) As observed in litter bag method, the decomposition rate of litter in Pinus densiflora was slower than that of Quercus mongolica. The higher elevation, the slower decomposition rate. The decomposition of litters at Gure where elevation in 50m was equally influenced by temperature and precipitation. But at Nogodan where elevation in 1300m was much inflenced by precipitation. The decay constant of litters was larger in hardwood forest than in coniferous forest. In the same species, the more elevatiion, the less decomposition constant. The time required for the decay of 50%, 95^, 99% of the accumulated litters in the forest floor were faster in hardwood forest than in coniferous forest. In the same species, the higher elevatiion, the longer time required.

• 한국통신학회논문지
• /
• 제26권12A호
• /
• pp.1971-1977
• /
• 2001

이동무선통신환경에서의 다중경로 레일레이 페이딩 채널은 선형 필터 모델로 나타내어 질 수 있고, 지연 경로의 특성에 따라 필터 탭 중 일부만이 수신기 설계에 있어 중요하게 고려될 수 있다. 지연경로를 나타내는 탭 계수의 크기에 따라 채널 등화기에서 선택적으로 탭을 사용함으로써 수신기의 복잡도를 감소시키고 사용 전력을 줄이는 효과를 가져오게 된다. 본 논문에서는 주어진 채널의 선형 필터 모델에서 최적의 방법으로 탭을 선택하는 방법을 제시하고, 기존의 방법과 비교하여 성능 향상을 보였다. 또한 잡음 전력 값에 대한 정보가 있는 경우, 제시된 방법은 CFAR (Constant False Alarm Rate) 판별의 장점을 가지게 됨을 보이고, 잡음 전력을 추정했을 시의 성능을 정확한 수식으로 유도하였다. 잡음 전력 추정을 위한 잡음 샘플 수를 증가시킴에 따라 빠른 속도로 최적 성능으로 수렴함을 유도된 수식과 시뮬레이션 결과를 통해 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.547-552
• /
• 2003

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR (material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over 300m. so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL(cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants wire applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to speaker mold machining. The finishing time was reduced to 12.6%. tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were removed.